Introduction
This manual provides essential information for the safe operation, maintenance, and troubleshooting of your EGO Power+ 21" Electric Snow Blower (Model SNT2120AP). Please read this manual thoroughly before operating the snow blower to ensure proper use and to prevent injury or damage.
Important Safety Information
- Always keep hands and feet away from moving parts.
- Wear sturdy footwear and appropriate protective gear during operation.
- Operate only in well-ventilated outdoor areas.
- Always follow manufacturer's instructions for operation and maintenance.
- Ensure all safety guards and devices are in place and functioning correctly before use.
Key Features
- Peak Power Technology: Combines the power of any two EGO POWER+ 56V ARC Lithium batteries for enhanced performance.
- Extended Throwing Distance: Capable of throwing snow up to 45 feet.
- Efficient Clearing: Designed to clear a 16-car driveway with 8 inches of snow on a single charge (when used with two recommended 7.5Ah ARC Lithium batteries, available separately).
- Auger-Propelled Design: Innovatively propels the snow blower forward while clearing snow, making operation effortless.
- Heated Handle Grips: Provides comfortable handling in cold weather conditions.
- High-Efficiency Brushless Motor: Delivers reliable power and performance.
- Variable Auger Speed Control: Allows adjustment of snow throwing distance.
- Durable Construction: Features weather-resistant heavy-duty steel and composite construction.
- LED Headlights: Two bright LED headlights for improved visibility during nighttime snow removal.
- Handle-Mounted Chute Adjustment: Conveniently adjust the chute direction from the operating position.
Visual Overview
Figure 1: EGO Power+ 21" Electric Snow Blower, Model SNT2120AP.
Figure 2: Snow blower demonstrating a 45-foot throwing distance.
Figure 3: Illustration of the auger-propelled design and variable speed control.
Setup
Unpacking and Assembly
- Carefully remove all components from the packaging.
- Unfold the handle assembly and secure it in the operating position using the quick-release levers. Ensure the handle is firmly locked.
- Attach the discharge chute to the snow blower body. Refer to the detailed diagrams in the printed manual for specific attachment points.
Battery Installation
This snow blower requires two EGO 56V ARC Lithium batteries (sold separately) for operation. Ensure batteries are fully charged before first use.
- Open the battery compartment cover located on the top of the snow blower.
- Insert two charged EGO 56V ARC Lithium batteries into the designated slots until they click securely into place.
- Close the battery compartment cover.
Figure 4: Proper installation of two EGO 56V ARC Lithium batteries for Peak Power technology.
Video 1: Demonstration of the EGO POWER+ Battery Platform, showing battery insertion and removal across various tools.
Operating Instructions
Starting the Snow Blower
- Ensure batteries are installed and the compartment cover is closed.
- Press and hold the safety button on the handle.
- While holding the safety button, pull the auger engagement lever towards the handle to start the auger.
- Adjust the variable auger speed control dial to your desired setting.
Clearing Snow
- Push the snow blower forward into the snow. The auger-propelled design will assist in movement.
- Use the handle-mounted chute adjustment to direct the snow away from cleared areas, buildings, and people.
- For deep or heavy snow, take narrower passes to prevent overloading the unit.
- Utilize the LED headlights for improved visibility during low-light conditions.
Video 2: Demonstration of the EGO 56V Peak Power Snow Blower in action, showing quiet snow removal for driveways.
Video 3: EGO Power+ Cordless Snow Blower tackling deep snow, demonstrating its clearing capabilities.
Maintenance
General Care
- After each use, clear any remaining snow or debris from the auger housing and chute.
- Inspect the auger paddles for wear or damage. Replace if necessary.
- Check all fasteners and ensure they are tight.
Battery Care and Storage
- Always remove batteries from the snow blower when not in use or during maintenance.
- Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
- Charge batteries fully before long-term storage.
Seasonal Storage
- Clean the snow blower thoroughly.
- Fold the handle for compact storage.
- Store in a dry, protected area.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Snow blower does not start. | Batteries not installed correctly or not charged. Safety button/lever not engaged. | Ensure batteries are fully charged and properly seated. Engage safety button and auger lever simultaneously. |
| Reduced snow throwing distance. | Chute clogged. Auger speed set too low. Wet/heavy snow. | Clear chute (with power off and batteries removed). Increase auger speed. Take narrower passes. |
| Snow blower stops during operation. | Overload (too much snow). Low battery charge. | Reduce load by taking smaller passes. Check battery charge and replace/recharge if low. |
Specifications
| Feature | Detail |
|---|---|
| Brand | EGO Power+ |
| Model Number | SNT2120AP |
| Power Source | Battery Powered (2 x 56V ARC Lithium) |
| Product Dimensions | 48.5"D x 41"W x 21"H |
| Item Weight | 60 Pounds |
| Clearing Width | 21 Inches |
| Ideal Snow Depth | Up to 8 inches (20.32 cm) |
| Throwing Distance | Up to 45 feet |
| Motor Type | High-Efficiency Brushless Motor |
| Special Features | Auger-Propelled, Heated Handles, LED Headlights, Variable Speed Control |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official EGO Power+ website. If you encounter any issues or require technical assistance, please contact EGO Power+ customer support.
Contact information and service center locations can typically be found on the manufacturer's website or in the full product manual.