glo hyper X2 Heated Tobacco Device User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your glo hyper X2 heated tobacco device. Please read this manual thoroughly before first use and retain it for future reference.

2. Package Contents

Verify that all items are present in your glo hyper X2 starter kit:

• glo hyper X2 Device x1
• Cleaning Brush x1
• USB Cable x1 (Note: AC adapter is not included and must be purchased separately.)

Image: The glo hyper X2 device packaging, showing the device and branding.

Image: The included USB charging cable and cleaning brush.

3. Device Overview

Familiarize yourself with the components of your glo hyper X2 device.

Image: The glo hyper X2 heated tobacco device in metal black.

The device features a sleek design with intuitive controls for heating and usage.

4. Setup and Charging

1. Initial Charge: Before first use, fully charge the device. Connect the provided USB cable to the device and to a compatible USB power source (e.g., computer USB port, USB wall adapter - not included).
2. Charging Time: Approximately 3 hours for a full charge. Charging time may vary depending on the power source and charging conditions.
3. Battery Indicator: The device will indicate charging status. Refer to the device's LED indicators for current battery level.

5. Operating Instructions

The glo hyper X2 offers two heating modes: Normal and Boost.

1. Insert Stick: Gently insert a compatible tobacco stick into the device's heating chamber.
2. Select Mode:
   • Normal Mode: Press and hold the main button until the device vibrates and the indicator lights illuminate.
   • Boost Mode: Press and hold the boost button (if available, or specific button for boost mode) until the device vibrates and the indicator lights illuminate.
3. Heating:
   • Normal Heating Time: Approximately 20 seconds.
   • Boost Heating Time: Approximately 15 seconds.
   The device will vibrate again when ready for use.
4. Usage:
   • Normal Usage Time: Approximately 4 minutes.
   • Boost Usage Time: Approximately 3 minutes.
   The device will indicate the end of the session.
5. Remove Stick: After use, carefully remove the tobacco stick.

A fully charged device provides approximately 20 consecutive uses. The actual number of uses may vary based on usage conditions.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and longevity of your device.

1. Cool Down: Ensure the device has cooled down completely before cleaning.
2. Use Cleaning Brush: Use the provided cleaning brush to gently remove any tobacco residue from the heating chamber and other accessible areas.
3. Avoid Liquids: Do not use water or any liquid cleaning agents directly on the device.
4. Frequency: Clean the device regularly, ideally after every 10-20 uses, or as needed.

7. Troubleshooting

8. Specifications

• Model: glo hyper X2
• Brand: glo
• Color: Metal Black
• Dimensions (H x W x D): 78mm x 43mm x 21mm
• Weight: Approximately 102g
• Battery Capacity: 3250 mAh (Non-standard battery included)
• Normal Heating Time: 20 seconds
• Boost Heating Time: 15 seconds
• Normal Usage Time: 4 minutes
• Boost Usage Time: 3 minutes
• Charging Time: Approximately 3 hours (may vary)
• Consecutive Uses (Full Charge): Approximately 20 (may vary)

9. Important Safety Information

Always use the device according to these instructions. Keep out of reach of children. Do not expose to extreme temperatures or liquids. Use only with compatible tobacco sticks. Do not attempt to disassemble or repair the device yourself.

10. Warranty and Support

For warranty information, product support, or service inquiries, please refer to the official glo website or contact their customer service directly. The manufacturer reference number for this product is nmvcdnmcl.