Introduction
Thank you for choosing the Blendtec Stealth X 885 Commercial-Grade Blender. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new blender. Please read all instructions carefully before first use and retain this manual for future reference.
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and/or injury to persons. This appliance is for commercial use. Do not operate the blender with a damaged cord or plug. Do not immerse the motor base in water or other liquids. Keep hands and utensils out of the container while blending to prevent severe injury. The blades are sharp; handle with care. Ensure the lid is securely in place before operating.
Package Contents
Upon unpacking, please verify that all components are present:
- Blender base (with integrated sound enclosure)
- Wildside+ blender jar (90 fluid ounces capacity)
- FourSide blender jar (75 fluid ounces capacity)
- Blender lid (soft lid, compatible with both jars)
Image: The Blendtec Stealth X 885 Blender system, featuring the main unit with its sound enclosure, alongside the Wildside+ and FourSide jars, and examples of blended beverages.
Setup
- Placement: Place the blender base on a stable, level, and dry surface. Ensure adequate ventilation around the unit. The dimensions are 14.9"D x 13.7"W x 29"H.
- Power Connection: Plug the power cord into a grounded electrical outlet.
- Jar Preparation: Ensure the desired blender jar (Wildside+ or FourSide) is clean and dry. The soft lid is interchangeable between both jars.
- Jar Placement: Place the prepared jar onto the blender base. It should sit securely on the drive socket.
- Sound Enclosure: The sound enclosure is integrated. Ensure it is in the open position before placing the jar, and close it before blending for optimal noise reduction.
Image: Close-up of the Blendtec Stealth X 885 control panel and the FourSide jar within the sound enclosure, illustrating the intuitive interface and compact design.
Operating Instructions
General Blending
- Add Ingredients: Place ingredients into the blender jar. Do not overfill beyond the maximum fill line.
- Secure Lid: Place the soft lid firmly onto the jar.
- Close Sound Enclosure: Lower the sound enclosure completely over the jar.
- Select Speed/Cycle: Use the illuminated OLED display and tactile keypad to select a pre-programmed blend cycle (42 available) or use the slider control for manual speed adjustment (up to 9 speeds).
- Start Blending: Press the start button. The blender will automatically shut off after a pre-programmed cycle is complete.
- Stop Blending: To stop manually, press the stop button.
Key Features for Operation
- Sound Enclosure: The sleek sound enclosure and proprietary airflow innovations significantly reduce blending noise to the level of a normal conversation.
- Titan X Motor: Equipped with a new Titan X brushless motor, designed for extended durability and longevity, lasting up to three times longer than traditional Blendtec motors. Features automatic braking and cooling.
- Nitro Blending System: Standard rings create a vacuum seal, preventing leaks and allowing direct serving from the cup.
- Blunt Blade Design: The stainless-steel forged blade is ten times stronger than other blender blades and features a blunt design for pulverizing ingredients safely, reducing injury risk.
Image: The Wildside+ jar, showing measurement markings and its BPA-free construction, designed to pull ingredients towards the blade for a consistent blend.
Image: The Wildside+ jar filled with fruit, highlighting the powerful 1800 Watt brushless motor that drives the blending process.
Image: A visual comparison demonstrating the effectiveness of the blunt blade design, showing ingredients before and after blending to achieve smoother results.
Maintenance and Cleaning
Jar Cleaning
- Self-Cleaning: For quick cleaning, add a small amount of soap and water to the jar. Secure the lid and run the blender on a low setting for less than one minute. Rinse thoroughly.
- Dishwasher Safe: The blender jars are dishwasher safe for convenient cleaning.
Base Unit Cleaning
- Wipe Down: Unplug the blender before cleaning. Wipe the blender base and sound enclosure with a damp cloth. Do not immerse the base in water.
- Avoid Abrasives: Do not use abrasive cleaners or scouring pads, as they may damage the surface.
Troubleshooting
If you encounter issues with your Blendtec Stealth X 885, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on | Not plugged in; power outage; safety switch not engaged. | Ensure the power cord is securely plugged into a working outlet. Check circuit breaker. Ensure the jar is correctly seated and the sound enclosure is fully closed. |
| Ingredients not blending smoothly | Too little liquid; ingredients too large; overfilling. | Add more liquid. Cut larger ingredients into smaller pieces. Reduce the amount of ingredients in the jar. Use the pulse function or a higher speed. |
| Blender stops during operation | Overload protection activated; motor overheating. | Unplug the unit and allow it to cool down for 15-20 minutes. Reduce the load in the jar before restarting. |
| Loud noise during blending | Sound enclosure not fully closed; foreign object in jar. | Ensure the sound enclosure is completely closed. Check the jar for any non-food items. |
If problems persist after attempting these solutions, please contact Blendtec Customer Support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Blendtec |
| Model | Stealth X 885 |
| Color | Black |
| Motor | Brushless Titan X Motor (1800 Watt) |
| Control Type | Illuminated OLED Display, Tactile Keypad, Slider Control |
| Pre-programmed Cycles | 42 |
| Speed Control | Variable (slider control up to 9 speeds) |
| Capacity (Wildside+ Jar) | 90 Fluid Ounces |
| Capacity (FourSide Jar) | 75 Fluid Ounces |
| Product Dimensions (D x W x H) | 14.9" x 13.7" x 29" |
| Item Weight | 19.21 pounds |
| Container Material | BPA-Free Plastic |
| Power Source | Corded Electric |
| UPC | 849369014910 |
| Date First Available | June 16, 2022 |
Warranty Information
The Blendtec Stealth X 885 Blender comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Blendtec website. Keep your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Blendtec Customer Support. You can typically find contact information on the Blendtec website or within your product packaging.