1. Introduction and Overview
Thank you for choosing the LUTEC Flair Outdoor Wall Light. This fixture combines modern design with advanced functionality, featuring an integrated Passive Infrared (PIR) motion sensor and an E27 lamp holder. Designed for outdoor use, it provides illumination and enhances security around your property. This manual provides essential information for safe installation, operation, and maintenance of your new light.
This image displays the LUTEC Flair outdoor wall light, featuring a black metal frame, a clear glass cylinder housing an E27 bulb, and an integrated PIR motion sensor and camera unit at the base. A smartphone screen on the right shows a live feed from the camera.
2. Safety Instructions
Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Always disconnect the main power supply before installing, servicing, or cleaning the fixture. Installation should be performed by a qualified electrician in accordance with local wiring regulations.
- Voltage: Ensure the supply voltage matches the requirements of the fixture.
- Outdoor Use: This product is designed for outdoor use and has an IP44 rating, protecting against solid objects larger than 1mm and splashes of water from any direction. Do not submerge.
- Bulb Type: Use only E27 bulbs within the specified wattage range. Do not exceed the maximum wattage indicated on the fixture.
- Mounting: Mount the fixture securely on a stable surface. Ensure the mounting location can support the weight of the light.
- Heat: The light fixture and bulb can become hot during operation. Allow to cool before handling.
3. Package Contents
Verify that all components are present before beginning installation:
- LUTEC Flair Outdoor Wall Light Fixture (1 unit)
- Mounting Hardware (screws, wall plugs)
- Instruction Manual
Note: E27 bulb is not included and must be purchased separately.
4. Setup and Installation
Follow these steps for proper installation:
- Prepare for Installation: Turn off the main power supply at the circuit breaker before starting any electrical work.
- Choose Location: Select a suitable outdoor location on a wall, ensuring it is within reach of electrical wiring and provides optimal coverage for the PIR sensor. Consider the dimensions for proper fit.
- Mounting the Fixture:
- Carefully remove the mounting bracket from the light fixture.
- Position the mounting bracket on the wall at the desired height and mark the drilling points.
- Drill holes using an appropriate drill bit for your wall material. Insert wall plugs if necessary.
- Secure the mounting bracket to the wall using the provided screws.
- Wiring: Connect the electrical wires from your power supply to the terminals on the fixture. Ensure correct polarity (Live, Neutral, Earth) as per local electrical codes. Secure all connections tightly.
- Attach Fixture: Carefully attach the light fixture to the mounted bracket, ensuring it is securely fastened.
- Install E27 Bulb: Unscrew the glass cylinder or access the E27 socket. Screw in a compatible E27 bulb (not supplied) into the lamp holder. Re-secure the glass cylinder if removed.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
This diagram illustrates the key dimensions of the LUTEC Flair outdoor wall light: height 32.6 cm, width 12 cm, and depth from wall 17.2 cm. It also highlights the E27 bulb type, sensor, IP44 rating, and app control capabilities.
The LUTEC Flair outdoor wall light is shown installed on a white brick wall next to a dark door, demonstrating its appearance in an outdoor setting. The light is illuminated, showcasing its functional design.
5. Operating Instructions
The LUTEC Flair light features a PIR motion sensor for automatic operation and can be controlled via a smart app.
- PIR Motion Sensor: The integrated PIR sensor detects movement within its detection range (typically up to 90 degrees horizontally and 10 degrees vertically, as indicated in product diagrams). When motion is detected, the light will illuminate for a set duration.
- Adjusting Sensor Settings: Depending on the model, sensitivity, and duration settings for the PIR sensor may be adjustable via physical dials on the sensor unit or through the companion smart app. Refer to the app's instructions for detailed configuration.
- Smart Control (via App): This fixture supports smart control via an app (e.g., LUTEC connect or Smart Camera ELARA, as suggested by product images). Download the relevant app from your smartphone's app store. Follow the in-app instructions to pair your light fixture and access features such as:
- Manual ON/OFF control
- Adjusting light duration after motion detection
- Viewing camera feed (if applicable to your specific model)
- Scheduling light operation
- E27 Bulb Operation: The light operates with a standard E27 bulb. The type of bulb (e.g., LED, incandescent) will affect the light output and energy consumption.
A detailed close-up of the base of the LUTEC Flair light, highlighting the integrated passive infrared (PIR) motion sensor and the camera lens. This view emphasizes the smart features of the fixture.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your light fixture.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Bulb Replacement: Ensure power is off and the bulb has cooled. Unscrew the old E27 bulb and screw in a new, compatible E27 bulb.
- Inspection: Periodically inspect the wiring and mounting for any signs of wear, damage, or loose connections. Address any issues promptly.
7. Troubleshooting
If you encounter issues with your LUTEC Flair light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; faulty bulb; loose wiring; sensor malfunction. | Check circuit breaker. Replace bulb. Inspect wiring connections (with power off). Check sensor settings. |
| Light stays on constantly. | Sensor sensitivity too high; continuous motion in detection zone; faulty sensor. | Adjust sensor sensitivity. Clear detection area. Contact support if sensor is faulty. |
| Light turns on randomly. | Sensor sensitivity too high; environmental factors (e.g., wind, animals, heat sources). | Reduce sensor sensitivity. Reposition fixture to avoid false triggers. |
| App connectivity issues. | Wi-Fi signal weak; incorrect pairing; app outdated. | Ensure strong Wi-Fi signal. Re-pair device following app instructions. Update app. |
8. Specifications
| Brand | LUTEC |
| Model Number | 5288811012 |
| Dimensions (L x W x H) | 17.2 x 12 x 32.6 cm |
| Weight | 1.6 kg |
| Material | Aluminum |
| Number of Light Sources | 1 |
| Bulb Base | E27 |
| Power Source | Corded Electric |
| IP Rating | IP44 (Splash-proof) |
| Switch Installation Type | Monopoint |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official LUTEC website. Keep your proof of purchase for warranty claims.
Online Resources: For additional support, FAQs, or to download the latest app version, please visit the official LUTEC support page or the app store for 'LUTEC connect' or 'Smart Camera ELARA'.
