Introduction
Thank you for purchasing the Andoer 2.7K Digital Camera. This compact and versatile camera is designed to capture high-quality photos and videos, offering features such as 2.7K video recording, 48MP photo resolution, 16X digital zoom, and a 2.88-inch IPS screen. This manual provides detailed instructions on how to set up, operate, and maintain your camera to ensure optimal performance and longevity.
Safety Information
- Do not expose the camera to water or moisture.
- Avoid dropping the camera or subjecting it to strong impacts.
- Keep the camera away from direct sunlight and high temperatures.
- Use only the specified battery and charging cable.
- Do not attempt to disassemble or repair the camera yourself. Contact qualified service personnel.
- Keep out of reach of small children.
Package Contents
Please check that all the following items are included in your package:
- 1 x Andoer 2.7K Digital Camera
- 2 x Lithium Batteries (3.7V 700mAh)
- 1 x USB Charge Cable
- 1 x Wrist Strap
- 1 x Carry Bag
- 1 x Users' Manual (English)
Product Overview
Familiarize yourself with the main components and controls of your Andoer digital camera.

Figure 1: Front and Rear View of the Andoer 2.7K Digital Camera, showing the lens, screen, and control buttons, along with two rechargeable batteries.

Figure 2: The camera's 2.88-inch IPS screen, highlighting its size and clarity for viewing content.

Figure 3: The compact and lightweight design of the camera, with dimensions of 9.4cm length, 5.6cm height, and 1.9cm thickness.

Figure 4: Underside of the camera showing the universal 1/4-inch screw hole for tripod mounting.
Setup
1. Battery Installation and Charging
The camera uses a 3.7V 700mAh lithium battery. Two batteries are included in the package.
- Open the battery compartment cover located at the bottom of the camera.
- Insert the battery into the compartment, ensuring the correct polarity as indicated inside the compartment.
- Close the battery compartment cover securely.
- To charge the battery, connect the camera to a USB power source (e.g., computer, wall adapter) using the provided USB charge cable. The charging indicator light will illuminate.
- Charging typically takes approximately 2-3 hours. The indicator light will turn off or change color once fully charged.

Figure 5: Illustration of opening the battery compartment and inserting the 700mAh rechargeable lithium battery.
2. Memory Card Installation
The camera supports external memory cards (Class-10 recommended) up to 128GB (not included).
- Locate the memory card slot, usually next to the battery compartment or on the side of the camera.
- Insert the memory card with the metal contacts facing the correct direction (refer to the diagram near the slot). Push until it clicks into place.
- To remove the card, gently push it in again until it springs out.
Operating the Camera
1. Power On/Off
- To power on, press and hold the Power button (usually marked with ⏻) for a few seconds.
- To power off, press and hold the Power button again until the screen turns off.
- The camera has an auto power-off function (1min/3min/5min) to conserve battery. This can be adjusted in the settings.
2. Taking Photos
- Turn on the camera. It will typically start in photo mode.
- Frame your shot using the IPS screen.
- Use the W (Wide) and T (Telephoto) buttons to adjust the 16X digital zoom.
- Press the Shutter button (usually on top of the camera) halfway down to allow the camera to auto-focus.
- Once focused, press the Shutter button fully down to capture the photo.
3. Recording Videos
- Switch to video mode (usually via a mode button or menu option).
- Frame your scene.
- Press the Shutter button to start recording. A recording indicator (e.g., red dot, timer) will appear on the screen.
- Press the Shutter button again to stop recording.
4. Playback
- Enter playback mode (usually via a dedicated button or menu).
- Use the navigation buttons (up/down/left/right) to browse through your photos and videos.
- Press the OK button to view a selected item or play a video.
5. Advanced Features
The camera includes several advanced functions to enhance your photography experience:
- Anti-Shake: Helps reduce blur caused by camera movement. Enable this feature in the settings for clearer images, especially in low light or with zoom.
- Face Detect & Smile Capture: Automatically detects faces and can trigger the shutter when a smile is detected.
- Beauty Face: Applies digital enhancements to smooth skin tones in portraits.
- Self-Timer: Set a delay (2s, 5s, 10s) before the shutter fires, allowing you to be in the shot.
- Continuous Shooting: Capture multiple photos in quick succession by holding down the shutter button.
- Built-in LED Fill Light: Provides additional illumination for photos in dark conditions. Activate it via a dedicated button or menu option.

Figure 6: Visual representation of Face Detection, Smile Capture, Beauty Face, and Auto Focus features in action.

Figure 7: Comparison showing the effect of the Anti-shake function, resulting in clearer images.

Figure 8: Demonstrations of Self-Timer (2s, 5s, 10s), Continuous Shooting, LED Fill Light in low light, and Face Detection & Smile Capture.
Maintenance
- Cleaning the Camera: Use a soft, dry cloth to clean the camera body. For the lens and screen, use a specialized lens cleaning cloth and solution. Do not use abrasive cleaners or solvents.
- Battery Care: Store batteries in a cool, dry place when not in use. Do not expose them to extreme temperatures. If the camera will not be used for an extended period, remove the battery.
- Storage: Store the camera in its carry bag or a protective case to prevent scratches and dust accumulation. Avoid storing in humid environments.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera does not power on. | Battery is low or not inserted correctly. | Charge the battery or re-insert it correctly. |
| Cannot take photos/videos. | Memory card is full, not inserted, or corrupted. | Insert a memory card, delete some files, or format the card (this will erase all data). |
| Images are blurry. | Camera shake, dirty lens, or out of focus. | Enable Anti-Shake, clean the lens, or ensure proper auto-focus before shooting. |
| Screen is blank. | Camera is off, battery is dead, or auto power-off activated. | Power on the camera, charge battery, or press any button to wake up. |
Specifications
| Feature | Detail |
|---|---|
| Image Sensor | CMOS Sensor |
| Display | 2.88 Inch IPS Screen |
| File Format | JPG / AVI |
| Picture Resolution | Up to 48MP (48MP/ 44MP/ 36MP/ 24MP/ 20MP/ 16MP/ 12MP/ 10MP, etc) |
| Video Resolution | 2.7K (2688x1520), 1080P (1920x1080), 720P (1280x720), VGA (640x480) |
| Digital Zoom | 16X Digital Zoom |
| Focal Length | f=7.36mm |
| Aperture | F/3.2 |
| Exposure | EV-3 to EV+3 |
| Power Supply | 1 * Lithium battery (3.7V 700mAh) |
| Item Size | 9.4 * 5.6 * 1.9cm (3.7 * 2.2 * 0.7in) |
| Item Weight | 115g (4.1oz) (with battery) |
| Operating System Requirement | Windows XP/ Vista/ 7/ 8/ 10, Mac 10.2 |
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Andoer website. If you encounter any issues not covered in this manual, please contact Andoer customer service for assistance.
You can also visit the Andoer Store on Amazon for more product information and support resources.





