1. Introduction
Thank you for choosing the EMKE LED Round Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read it thoroughly before installation and keep it for future reference.
A round LED bathroom mirror, 60 cm in diameter, featuring an illuminated edge and integrated touch controls for power and light settings.
2. Safety Warnings
Caution: This is a fragile item. Handle with extreme care during unpacking, installation, and use.
- Always use appropriate safety measures, such as protective gloves and eyewear, when installing wall-mounted items.
- Ensure the installation surface is structurally sound and capable of supporting the mirror's weight.
- Keep the mirror and its components out of reach of children and pets.
- All electrical work must be performed by a qualified electrician and comply with local electrical codes.
- Do not attempt to modify or repair the mirror yourself. Contact customer support for assistance.
- Disconnect power at the circuit breaker before any installation or maintenance.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation:
- EMKE LED Round Bathroom Mirror (Model 2, 60 cm)
- Mounting hardware (screws, wall anchors)
- Instruction Manual (this document)
Note: The product does not include a power plug or an external wall switch. Professional installation is recommended.
4. Setup and Installation
4.1 Pre-Installation
- Measure Installation Space: Before installation, carefully measure the available space to ensure the 60 cm diameter mirror fits correctly.
- Power Disconnection: Turn off the main power supply to the installation area at the circuit breaker.
- Identify Wiring: Locate the electrical wires (Live, Neutral, Ground) in the wall where the mirror will be mounted.
4.2 Mounting the Mirror
- Marking: Hold the mirror against the wall at the desired height and use a pencil to mark the positions for the mounting brackets. Refer to the diagram for bracket spacing.
- Drilling: Drill holes at the marked positions. Insert appropriate wall anchors if necessary.
- Secure Brackets: Attach the mounting brackets securely to the wall using the provided screws.
- Wiring: Connect the mirror's electrical wires to your household wiring. Ensure correct connections: Live to Live, Neutral to Neutral, and Ground to Ground. Use appropriate wire connectors.
- Mount Mirror: Carefully hang the mirror onto the secured wall brackets. Ensure it is stable and level.
This diagram provides the physical dimensions of the mirror (600mm diameter, 30mm thickness) and details the electrical wiring connections required for installation, including live, neutral, and ground wires. It also notes that the product does not include a plug or wall switch.
4.3 Post-Installation
- Restore Power: Once the mirror is securely mounted and wired, restore power at the circuit breaker.
- Test Functionality: Test the mirror's touch controls and light functions.
5. Operating Instructions
The EMKE LED mirror features intuitive touch controls for easy operation.
Detail of the mirror's touch controls: a square button for power (on/off) and a circular 'M' button for cycling through 3 light colors and adjusting brightness. The buttons glow milky white when active and blue when off.
5.1 Power On/Off
- Tap the square touch button to turn the LED illumination on or off.
- When the mirror is off, the button will glow blue. When on, it will glow milky white.
5.2 Adjusting Light Color
- With the mirror on, tap the circular 'M' touch button to cycle through the three available light color temperatures:
- Cool White (6500K): Bright, crisp light for detailed tasks.
- Neutral White (4000K): Balanced illumination for general use.
- Warm White (3000K): Soft, ambient light for relaxation.
This graphic demonstrates the mirror's ability to switch between three color temperatures (cool white 6500K, neutral white 4000K, warm white 3000K) with a single tap, and its stepless dimming capability from 10% to 100% brightness by long-pressing the 'M' button.
5.3 Adjusting Brightness (Dimming)
- To adjust the brightness, long-press the circular 'M' touch button. The brightness will gradually increase or decrease. Release the button when the desired brightness level is reached.
- The mirror features stepless dimming from 10% to 100%.
5.4 Memory Function
- The mirror includes a memory function that retains the last used brightness and color temperature settings when turned off and on again.
5.5 Automatic Shut-off
- For energy saving, the LED illumination will automatically turn off after 3 hours of continuous operation.
This image illustrates the mirror's energy-saving feature, which automatically turns off the LED illumination after 3 hours of continuous operation.
5.6 External Wall Switch Compatibility
- If an external wall switch is used to control the mirror's power, ensure the wall switch remains in the 'on' position for the mirror's integrated touch controls to function.
This image clarifies that if an external wall switch is used, it must remain in the 'on' position for the mirror's integrated touch controls to function.
6. Maintenance
To ensure the longevity and optimal performance of your EMKE LED mirror, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth and a mild, non-abrasive glass cleaner to clean the mirror surface. Avoid harsh chemicals or abrasive materials that could damage the mirror or its finish.
- Electrical Safety: Before cleaning or performing any maintenance, always disconnect power to the mirror at the circuit breaker.
- Inspection: Periodically inspect the mirror and its wiring for any signs of damage or wear. If any issues are found, discontinue use and contact customer support.
- Water Exposure: While the mirror has an IP44 rating for water resistance, avoid direct water spray or prolonged exposure to excessive moisture.
7. Troubleshooting
If you encounter any issues with your EMKE LED mirror, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply. Loose wiring connection. External wall switch is off. | Check the circuit breaker and ensure power is restored. Verify all wiring connections are secure (consult a qualified electrician). Ensure the external wall switch (if used) is in the 'on' position. |
| Touch controls are unresponsive. | Power issue. Temporary software glitch. | Ensure the mirror is receiving power. Try cycling power at the circuit breaker for 30 seconds. Ensure your finger is clean and dry when touching the controls. |
| Light color or brightness does not change. | Incorrect operation. | Review Section 5: Operating Instructions for correct button presses (tap for color, long-press for brightness). |
| Mirror turns off automatically. | Automatic 3-hour shut-off feature. | This is a normal energy-saving feature. Turn the mirror back on using the touch switch. |
If the problem persists after attempting these solutions, please contact EMKE customer support.
8. Specifications
An overview of the mirror's functionalities, including adjustable brightness, three distinct light color options, a memory function that recalls the last setting, an automatic shut-off after 3 hours, and an IP44 rating for water resistance.
| Feature | Detail |
|---|---|
| Brand | EMKE |
| Model | Model 2 60cm (TOLM03AK-EMKE-FR) |
| Product Dimensions | Diameter 60 cm (60L x 60W cm) |
| Thickness | 30 mm |
| Item Weight | 4.2 kg |
| Material | Glass (Mirror), Aluminum (Frame) |
| Mounting Type | Wall Mount |
| Light Source | LED |
| Light Colors | 3 (Warm White 3000K, Neutral White 4000K, Cool White 6500K) |
| Brightness | Adjustable (10% - 100% stepless dimming) |
| Control | Integrated Touch Switch |
| Special Features | Memory Function, 3-Hour Automatic Shut-off |
| Waterproof Rating | IP44 |
| LED Lifespan | 50,000 hours |
| Energy Efficiency Class | F |
The official EU energy label for the EMKE LED mirror, indicating an energy efficiency class of F and a consumption of 6 kWh per 1000 hours. For more details, visit the EPREL database.
9. Warranty Information
EMKE products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your region, please refer to the warranty card included with your purchase or visit the official EMKE website. Keep your proof of purchase for warranty claims.
10. Support and Contact
If you have any questions, require technical assistance, or need to report an issue, please contact EMKE customer support through the following channels:
- Website: Visit the official EMKE website for FAQs and support contact information.
- Email: Refer to your purchase documentation for customer service email addresses.
- Retailer: Contact the retailer from whom you purchased the mirror.
Please have your model number (Model 2 60cm) and purchase date ready when contacting support.