Kalia 1500W Ceramic Heater (Model: BAT-HT15PZ) User Manual

1. Introduction

Thank you for choosing the Kalia 1500W Ceramic Heater, model BAT-HT15PZ. This modern electric radiator is designed to provide efficient and comfortable heating for spaces up to 20 m². Featuring advanced dry inertia heating technology, an intuitive LCD control panel, and multiple operating modes, this heater offers a reliable and energy-efficient solution for your home or office. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

Figure 1: Front view of the Kalia 1500W Ceramic Heater.

2. Important Safety Information

Please read and understand all safety warnings and instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not cover the heater. Covering the heater can cause overheating and fire.
• Do not operate the heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• Ensure the heater is properly grounded if required by local electrical codes.
• The heater is equipped with Overheat Protection and a Child Safety Lock for enhanced safety.

3. Product Features

The Kalia 1500W Ceramic Heater is equipped with a range of features designed for comfort, efficiency, and safety:

• Dry Inertia Heating: Utilizes a stone core to absorb and gradually release heat, providing consistent warmth.
• Wall Mountable Design: Allows for permanent installation, saving floor space.
• Digital LCD Screen Control: Provides clear display and easy adjustment of settings.
• Thermostat: Maintains desired room temperature automatically.
• 4 Operating Modes: Comfort, Eco, Program, and Frost Protection for versatile heating needs.
• 3 Pre-Set Programs: Convenient pre-configured heating schedules.
• Daily & Hourly Scheduling: Customize heating times to match your lifestyle.
• Open Window Detection: Automatically pauses heating if a sudden temperature drop is detected, saving energy.
• Overheat Protection: Automatically shuts off the heater if it reaches an unsafe temperature.
• Child Safety Lock: Prevents accidental changes to settings.
• 6-Order Pilot Wire: For advanced integration into home heating systems (professional installation recommended).
• Sleek Design: Modern aesthetic to complement any interior.
• Certifications: ERP 2015/1188 Directive Compliant, Class II, IP24 Rated, CE/NF/RoHS Certified.

4. Setup and Installation

The Kalia Ceramic Heater is designed for wall mounting. Ensure you have the necessary tools and follow these steps carefully.

4.1 Package Contents

• Kalia 1500W Ceramic Heater Unit
• Wall Mounting Bracket
• Mounting Screws and Wall Plugs
• User Manual (this document)

Figure 2: Product packaging showing the Kalia brand and model information.

4.2 Choosing a Location

• Select a wall location that is free from obstructions and at least 0.9 meters (3 feet) away from combustible materials.
• Ensure the wall can support the weight of the heater (approximately 20 pounds).
• Avoid locations directly below electrical outlets or near water sources.
• Consider the heating coverage area of 20 m² when selecting the room.

Figure 3: Example of the Kalia heater mounted on a wall in a bedroom setting.

Figure 4: Example of the Kalia heater mounted on a wall in a living room setting.

4.3 Wall Mounting Steps

1. Marking: Hold the mounting bracket against the wall at the desired height. Use a pencil to mark the positions for drilling.
2. Drilling: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert wall plugs if necessary.
3. Attach Bracket: Secure the mounting bracket to the wall using the provided screws. Ensure it is level and firmly attached.
4. Mount Heater: Carefully lift the heater and align the slots on the back of the unit with the hooks on the mounting bracket. Lower the heater onto the bracket until it clicks securely into place.
5. Connect Power: Plug the heater into a suitable 230V, 50Hz electrical outlet.

Figure 5: Top and side views illustrating the heater's dimensions and mounting points.

Figure 6: Dimensional comparison of Kalia ceramic heaters, including the 1500W model.

5. Operating Instructions

The Kalia Ceramic Heater features an intuitive digital LCD control panel for easy operation.

5.1 Control Panel Overview

Figure 7: Digital LCD Control Panel with buttons for power, temperature adjustment, mode, and program selection.

• Power Button (⏻): Turns the heater ON or OFF.
• Up (∧) / Down (∨) Buttons: Adjust temperature settings, time, or navigate menu options.
• Mode (M) Button: Cycles through operating modes (Comfort, Eco, Program, Frost Protection).
• Program (PRG) Button: Accesses and sets pre-set or custom programs.
• Open Window Detection Button (⊞): Activates or deactivates the open window detection feature.

5.2 Initial Setup (Setting Time and Date)

1. Press and hold the M button for a few seconds to enter the settings menu.
2. Use the ∧ and ∨ buttons to navigate to the time/date setting.
3. Press M to select, then use ∧ and ∨ to adjust values. Press M again to confirm each setting (hour, minute, day).
4. Press the Power button to exit the settings menu.

5.3 Operating Modes

Press the M button to cycle through the following modes:

• Comfort Mode: Heats to your desired set temperature. Use ∧ and ∨ to adjust.
• Eco Mode: Heats to a slightly lower, energy-saving temperature (e.g., 3°C below Comfort setting).
• Program Mode: Operates according to your pre-set daily and hourly schedules.
• Frost Protection Mode: Maintains a minimum temperature (e.g., 7°C) to prevent freezing.

5.4 Setting Programs (Daily & Hourly Scheduling)

1. Press the PRG button to enter program setting mode.
2. Use ∧ and ∨ to select a day of the week or a pre-set program (P1, P2, P3).
3. Press PRG to confirm. You can then set hourly modes (Comfort, Eco, Frost Protection) for each day.
4. Use ∧ and ∨ to select the hour, then press M to change the mode for that hour.
5. Repeat for all hours and days as desired. Press the Power button to save and exit.

5.5 Child Safety Lock

To activate/deactivate the child safety lock, press and hold the ∧ and ∨ buttons simultaneously for 3 seconds. A lock icon will appear/disappear on the LCD screen.

5.6 Open Window Detection

Press the Open Window Detection button (⊞) to toggle this feature ON or OFF. When active, the heater will temporarily stop heating if it detects a sudden drop in room temperature, indicating an open window or door, to conserve energy.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your Kalia Ceramic Heater.

6.1 Cleaning

• Always unplug the heater and allow it to cool completely before cleaning.
• Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Do not immerse the heater in water or allow water to drip into the interior.
• Periodically vacuum the air intake and exhaust grilles to remove dust and lint buildup.

6.2 Storage

If storing the heater for an extended period, unplug it, clean it thoroughly, and store it in a cool, dry place, preferably in its original packaging.

7. Troubleshooting

Refer to the following table for common issues and their solutions.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Kalia customer support.

8. Product Specifications

Figure 8: NF Certification logo, indicating compliance with French and European standards.

9. Warranty and Customer Support

9.1 Warranty Information

The Kalia 1500W Ceramic Heater (Model: BAT-HT15PZ) comes with a 2-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, unauthorized repair, or failure to follow the instructions in this manual.

Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For technical assistance, warranty claims, or any questions regarding your Kalia Ceramic Heater, please contact our customer support team:

• Website: Visit the official Kalia website (if available, otherwise generic advice)
• Email: support@kalia.com (placeholder, as no specific email is provided)
• Phone: +1-XXX-XXX-XXXX (placeholder, as no specific phone is provided)

When contacting support, please have your model number (BAT-HT15PZ) and proof of purchase ready.