Philips HC5610/60

Philips Hair Clipper 5000 Series (HC5610/60) User Manual

Model: HC5610/60

1. Introduction

This manual provides essential information for the safe and effective use of your Philips Hair Clipper 5000 Series, model HC5610/60. Please read these instructions carefully before first use and retain them for future reference.

Key Features:

  • HairSmooth Technology: Designed for efficient and smooth cutting, preventing hair from clogging.
  • DualCut Technology: Features self-sharpening blades for fast and precise cutting performance.
  • 27 Length Settings: Adjustable cutting lengths from 0.5mm (without comb) to 28mm, in 1mm increments.
  • Cordless and Corded Use: Offers flexibility with approximately 75 minutes of cordless operation after an 8-hour charge.
  • Waterproof Design: Allows for easy cleaning under running water.
  • No Oiling Required: The self-sharpening stainless steel blades eliminate the need for lubrication.

2. Safety Information

WARNING: To reduce the risk of electric shock or injury:

  • This appliance is waterproof and suitable for use in the bath or shower. However, it must not be submerged in water.
  • Always hold the appliance firmly during use and ensure it does not come into contact with water beyond its waterproof rating.
  • Avoid using the appliance when it is wet or if your hands are wet during charging.
  • Do not use the appliance if it is damaged in any way.
  • Keep the appliance and its cord away from heated surfaces.
  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

3. Package Contents

Verify that all items are present in your package:

  • Philips Hair Clipper HC5610/60
  • Long Hair Comb (16-28mm)
  • Short Hair Comb (3-15mm)
  • Two-Block Comb (2mm)
  • Thinning Comb
  • Hair Cutting Cape
  • Cleaning Brush
  • Charger
Philips Hair Clipper HC5610/60 and accessories

Image: The Philips Hair Clipper HC5610/60 shown with its various combs and the included hair cutting cape.

Philips Hair Clipper HC5610/60 with combs and cape

Image: A closer view of the Philips Hair Clipper and its accompanying combs and cape.

Person wearing a hair cutting cape

Image: A person wearing the included hair cutting cape, demonstrating its use for home haircuts.

4. Setup

Charging the Appliance:

  1. Ensure the appliance is switched off.
  2. Insert the small plug of the charger into the appliance's charging socket.
  3. Plug the charger into a wall outlet. The charging indicator light will illuminate.
  4. Allow the appliance to charge for 8 hours for a full charge, providing approximately 75 minutes of cordless use.
  5. After charging, unplug the charger from the wall outlet and then from the appliance.

The appliance can also be used directly from the mains supply while charging.

5. Operating Instructions

Attaching and Detaching Combs:

  • To attach a comb, slide it onto the cutting element until it clicks into place.
  • To detach a comb, pull it off the cutting element.

Adjusting Cutting Length:

  1. With a comb attached, rotate the length setting adjustment ring on the appliance handle.
  2. Select your desired length from 2mm to 28mm in 1mm increments.
  3. Without any comb attached, the clipper provides a 0.5mm trim.
  4. The 2mm two-block comb provides a fixed 2mm trimming length.
Hand adjusting the length setting dial on the hair clipper

Image: A hand demonstrating how to adjust the cutting length using the integrated dial on the clipper.

Close-up of the length adjustment dial on the Philips Hair Clipper

Image: A detailed view of the length adjustment dial, showing the various millimeter settings.

Hair Cutting:

  1. Ensure hair is clean and dry before cutting.
  2. Select the appropriate comb and desired length setting.
  3. Switch on the appliance.
  4. Move the clipper slowly against the direction of hair growth.
  5. For an even cut, ensure the comb attachment always remains in full contact with the skin.
Man using Philips Hair Clipper for a self-haircut

Image: A man performing a self-haircut using the Philips Hair Clipper, demonstrating typical usage.

Hair being smoothly guided into the clipper comb

Image: An illustration showing how hair is smoothly guided into the open comb design for efficient cutting.

Man using the clipper to trim his beard

Image: A man using the Philips Hair Clipper to trim his beard, highlighting its versatility.

6. Maintenance

Cleaning the Appliance:

The Philips Hair Clipper HC5610/60 is designed for easy cleaning due to its waterproof construction.

  1. After each use, switch off the appliance and disconnect it from the power outlet if connected.
  2. Remove the comb attachment.
  3. Rinse the cutting element and the comb attachment under running tap water.
  4. You can also rinse the entire appliance body under running water.
  5. Shake off excess water and allow all parts to air dry completely before reassembling or storing.
  6. Use the provided cleaning brush to remove any stubborn hair clippings from the cutting element.
Philips Hair Clipper being rinsed under running water

Image: The Philips Hair Clipper being cleaned under running water, demonstrating its waterproof feature.

Philips Hair Clipper being rinsed under running water

Image: A close-up of the clipper head being rinsed under a faucet.

Blade Maintenance:

The stainless steel blades of your Philips Hair Clipper are self-sharpening and do not require oiling. This ensures consistent cutting performance without additional maintenance.

No oiling required icon

Image: An icon indicating that no oiling is required for the clipper blades.

7. Troubleshooting

  • Appliance does not switch on: Ensure the appliance is charged or connected to a power source.
  • Poor cutting performance: Check if the comb is correctly attached. Ensure the blades are clean and free of hair. The blades are self-sharpening, so dullness is unlikely with proper use.
  • Hair gets pulled: Clean the cutting element thoroughly. Ensure hair is dry before cutting. Move the clipper slower.
  • Charging indicator not working: Ensure the charger is properly connected to both the appliance and the wall outlet.

If the issue persists, please contact Philips customer support.

8. Specifications

Model NumberHC5610/60
BrandPhilips
Power SourceBattery (NiMH) / Corded
Charging Time8 hours
Run TimeApprox. 75 minutes
Cutting Lengths0.5mm (no comb), 2mm (two-block comb), 3-28mm (adjustable combs)
Number of Length Settings27
Blade MaterialStainless Steel
WaterproofYes
International Voltage CompatibleYes
Dimensions (LxWxH)195 x 60 x 45 mm
WeightApprox. 0.51 kg (packaged)

9. Warranty and Support

This Philips Hair Clipper HC5610/60 comes with a 2-year warranty on the main unit. Please retain your proof of purchase for warranty claims.

For further assistance, troubleshooting, or to inquire about replacement parts, please visit the official Philips support website or contact their customer service department in your region.

You can find more information and support at the Philips Brand Store on Amazon.

Related Documents - HC5610/60

Preview Машинка для стрижки волосся Philips серії 5000 HC5610/15: Точність, Довговічність та Легкість
Огляд машинки для стрижки волосся Philips серії 5000 HC5610/15. Дізнайтеся про технології Trim-and-Flow, DuraPower, 28 налаштувань довжини, самозаточувані леза та легке обслуговування.
Preview Philips BT9810 Beard Trimmer User Manual
Comprehensive user manual for the Philips BT9810 beard trimmer, covering safety instructions, charging, usage, cleaning, maintenance, and specifications. Learn how to achieve precise beard styles with this advanced grooming device.
Preview Philips Headgroom QC5580/32 Hair Clipper - Product Overview
Detailed overview of the Philips Headgroom QC5580/32 hair clipper, featuring a 180° rotating head, 14 length settings, cordless operation up to 60 minutes, self-sharpening blades, and full washability. Includes specifications and features for easy home hair styling.
Preview Philips All-in-One Trimmer 7000 Series MG7951/15: Precision Grooming for Face, Hair, and Body
Discover the Philips All-in-One Trimmer 7000 Series (MG7951/15) with 17 tools for ultimate precision grooming of face, hair, and body. Features BeardSense technology, self-sharpening blades, 120-minute runtime, and 100% waterproof design for versatile use.
Preview Philips MG5931/15 All-in-One Trimmer 5000 Series - Features and Specifications
Explore the Philips MG5931/15 All-in-One Trimmer 5000 Series, a versatile 10-in-1 grooming solution for face, hair, and body. Featuring self-sharpening blades, BeardSense technology, 120 minutes of battery life, and a 100% waterproof design for ultimate convenience.
Preview Philips Seria 5000 Multigroom All-in-One MG5920/15: Complete Grooming Solution
Discover the Philips Seria 5000 Multigroom All-in-One MG5920/15, a versatile 10-in-1 grooming device for face, hair, and body. Featuring self-sharpening steel blades and BeardSense technology for precise styling and long-lasting performance.