Kalia TANA 1500W Dry Inertia Electric Radiator with LCD Screen User Manual

1. Introduction and Product Overview

Thank you for choosing the Kalia TANA 1500W Dry Inertia Electric Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your new heating appliance. Please read these instructions carefully before use and retain them for future reference.

The Kalia TANA radiator features dry inertia heating technology, utilizing a cast iron heating core to provide gentle and continuous warmth. It is equipped with an electronic control system and an LCD screen for precise temperature management and programming.

Principle of Operation

The radiator operates by heating a cast iron plate using an integrated electrical resistance. The cast iron core accumulates heat and then slowly releases it over several hours, even after the heating element has cycled off. This thermal inertia provides a consistent and comfortable heat distribution, contributing to energy efficiency compared to conventional radiant panels or convectors.

Figure 1: Front view of the Kalia TANA 1500W Dry Inertia Electric Radiator.

2. Safety Information

Always observe the following safety precautions to reduce the risk of fire, electric shock, or injury.

• Read all instructions before using this appliance.
• Ensure the power supply voltage matches the rating label on the radiator.
• Do not operate the radiator with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the radiator and away from the sides and rear.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the radiator.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The radiator is designed for indoor use only and is rated IP24, meaning it is protected against splashing water. However, it should not be installed directly above or below a fixed socket outlet.
• Disconnect the power supply before cleaning or performing any maintenance.

Figure 2: NF Certification Logo, indicating compliance with French and European safety standards.

3. Product Features

The Kalia TANA 1500W radiator is designed with user comfort and energy efficiency in mind, incorporating several advanced features:

• Dry Inertia Heating: Utilizes a cast iron core for prolonged, gentle heat diffusion.
• Electronic Control with LCD Screen: Provides precise temperature regulation and clear display of settings.
• Multiple Operating Modes:
  • Comfort Mode: Maintains your desired comfortable temperature.
  • Eco Mode: Reduces the temperature by a set offset (e.g., 3.5°C below Comfort) for energy saving.
  • Frost-Free Mode: Maintains a minimum temperature (e.g., 7°C) to prevent freezing.
• Pre-installed Programs: Three factory-set programs for convenience.
• Daily and Weekly Programming: Customize heating schedules to fit your lifestyle.
• Open Window Detection: Automatically reduces heating power if a sudden temperature drop (indicating an open window) is detected, saving energy.
• Overheat Protection: Built-in safety mechanism to prevent the appliance from overheating.
• Pilot Wire Compatibility: Allows connection to a central programming system (if available in your installation).
• Curved Panel Design: Modern and elegant aesthetic.
• ERP (2015/1188) Directive Compliant: Meets European energy efficiency standards.
• Class II Insulation: Double insulated for enhanced safety.
• IP24 Rating: Protected against splashing water, suitable for bathroom zones 2 and 3.

Figure 3: Kalia TANA radiator seamlessly integrated into a modern bedroom environment.

4. Setup and Installation

The Kalia TANA radiator is designed for easy wall-mounted installation. A wall mounting kit is included with your purchase.

Installation Steps:

1. Choose Location: Select a suitable wall location, avoiding areas directly below electrical outlets. Ensure adequate clearance from furniture and curtains (minimum 1 meter from the front). The radiator is ideal for living rooms and children's bedrooms.
2. Mark Drilling Points: Use the provided mounting bracket as a template to mark the drilling points on the wall. Ensure the marks are level.
3. Drill Holes: Drill holes at the marked points and insert appropriate wall plugs (if not already integrated into the kit).
4. Attach Bracket: Securely fasten the mounting bracket to the wall using the screws provided.
5. Mount Radiator: Carefully lift the radiator and hook it onto the wall mounting bracket. Ensure it is securely seated and locked into place. The wall fixation is lockable for added security.
6. Electrical Connection: Connect the radiator to your electrical supply according to local wiring regulations. If using a pilot wire system, connect the pilot wire as per the system's instructions. It is recommended to have this step performed by a qualified electrician.

Note: The radiator operates on 230 Volts and has a power consumption of 1500 Watts. Its dimensions are approximately 80 cm (length) x 12.5 cm (depth) x 45 cm (height).

Figure 4: Dimensional overview of Kalia TANA radiators, including 1000W, 1500W, and 2000W models.

5. Operating Instructions

The Kalia TANA radiator features an intuitive LCD control panel for easy operation.

Control Panel Overview:

Figure 5: Detailed view of the LCD control panel with buttons for temperature adjustment, power, mode selection, and programming.

• Power Button (⏻): Turns the radiator ON or OFF.
• Up (⌃) / Down (⌄) Buttons: Adjust the desired temperature or navigate through programming options.
• Mode (M) Button: Cycles through operating modes: Comfort, Eco, and Frost-Free.
• Program (PRG) Button: Accesses and sets daily/weekly heating programs.
• Window Detection Button: Manually activates or deactivates the open window detection feature.

Setting the Temperature:

1. Turn on the radiator using the Power button.
2. Press the Up or Down buttons to adjust the desired temperature. The LCD screen will display the set temperature.
3. The radiator will automatically maintain this temperature in Comfort mode.

Selecting Operating Modes:

Press the 'M' (Mode) button repeatedly to cycle through the available modes:

• Comfort Mode: Indicated by a specific icon (e.g., sun). The radiator maintains the set temperature.
• Eco Mode: Indicated by a specific icon (e.g., moon or leaf). The radiator maintains a temperature typically 3.5°C lower than the Comfort set point.
• Frost-Free Mode: Indicated by a snowflake icon. The radiator maintains a minimum temperature (e.g., 7°C) to protect against freezing.

Programming (Daily/Weekly):

The radiator offers daily and weekly programming options. Refer to the detailed programming section in the full manual (if provided separately) for specific steps. Generally, you will:

1. Press the 'PRG' button to enter programming mode.
2. Use the Up/Down buttons to select the day and time.
3. Assign a desired mode (Comfort, Eco, or Frost-Free) for each time slot.
4. Save your program settings.

6. Maintenance

The Kalia TANA radiator is designed for minimal maintenance. No specific internal maintenance is required.

• Cleaning: Before cleaning, ensure the radiator is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Thermal Safety: The radiator is equipped with an automatic reset thermal safety device. In case of overheating, the device will cut power to the heating element. Once the radiator cools down, it will automatically reset. If this occurs frequently, consult the troubleshooting section or contact customer support.

7. Troubleshooting

If you encounter issues with your Kalia TANA radiator, please refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact Kalia customer support.

8. Specifications

9. Warranty and Support

Your Kalia TANA 1500W Dry Inertia Electric Radiator comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, neglect, accidents, or unauthorized repairs.

For technical assistance, warranty claims, or to inquire about spare parts, please contact Kalia customer support through your retailer or the official Kalia website. Kalia is a brand of Batimex, a French company.

For more information, you may visit the Kalia Brand Store.