PARIS RHÔNE 4-in-1 Automatic Milk Frother

Introduction

Thank you for choosing the PARIS RHÔNE 4-in-1 Automatic Milk Frother. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.

Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances. This includes, but is not limited to, the following:

• Read all instructions before operating the appliance.
• Do not immerse the frother base, power cord, or plug in water or other liquids.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact customer support for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to 'off', then remove the plug from the wall outlet.
• Do not use the appliance for other than intended use.
• Avoid contact with moving parts.
• Do not overfill the milk frother beyond the maximum fill lines indicated inside the jug.
• Ensure the whisk is correctly installed before operation.

Product Overview

The PARIS RHÔNE PE-MF010 is a versatile 4-in-1 automatic milk frother designed to create various milk textures for your beverages. It can produce hot dense foam, hot airy foam, cold froth, and warm milk.

The PARIS RHÔNE Milk Frother features an elegant, ergonomic design for comfortable and secure handling.

This frother offers four distinct modes: Hot Airy Foam, Hot Dense Foam, Cold Foam, and Warm Milk, all controlled by a single button.

The appliance is designed to produce delicate and thick creamy foam, enhancing the texture of your coffee.

Constructed with a non-stick coating, 304 stainless steel, and scratch-resistant materials, the frother is designed for easy cleaning.

Safety features include ETL listing, automatic shut-off, precise temperature control, and quiet operation.

What's in the Box:

• 1 x Milk Frother
• 2 x Whisks (one for frothing, one for heating)
• 1 x Cleaning Brush
• 1 x Power Base

Setup

Before using your milk frother for the first time, please follow these steps:

1. Unpack all components and remove any packaging materials.
2. Wash the inside of the frother jug and the whisks with warm, soapy water. Rinse thoroughly and dry. Do not immerse the exterior of the jug or the power base in water.
3. Place the power base on a dry, flat, and stable surface.
4. Insert the desired whisk into the bottom of the frother jug. Ensure it is securely seated. The spring whisk is for frothing, and the whisk without a spring is for heating milk only.
5. Place the frother jug onto the power base.

Operating Instructions

Filling Guidelines:

• For frothing (hot dense foam, hot airy foam, cold froth): Do not exceed the lower 'MAX FROTH' fill line (approximately 150ml). Overfilling can cause overflow.
• For heating milk (without frothing): Do not exceed the upper 'MAX HEAT' fill line (approximately 240ml).
• Always use cold milk for best results.

Selecting a Mode:

The frother operates with a single button. The indicator light will change color to show the selected mode.

• Hot Dense Foam: Press the button once. The indicator light will turn red. (Uses spring whisk)
• Hot Airy Foam: Press the button twice quickly. The indicator light will turn red. (Uses spring whisk)
• Cold Froth: Press and hold the button for 2 seconds. The indicator light will turn blue. (Uses spring whisk)
• Warm Milk: Replace the spring whisk with the non-spring whisk. Press the button once. The indicator light will turn red.

Frothing/Heating Process:

1. Pour the desired amount of cold milk into the frother jug, observing the MAX fill lines.
2. Place the lid on the frother jug.
3. Place the frother jug onto the power base.
4. Select your desired mode by pressing the control button as described above. The frother will start automatically.
5. The frother will automatically shut off when the process is complete (approximately 2 minutes). The indicator light will turn off.
6. Carefully remove the frother jug from the base and pour out the frothed or heated milk.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your frother.

Cleaning the Frother:

1. Always unplug the appliance from the power outlet and allow it to cool down completely before cleaning.
2. Remove the whisk from the frother jug.
3. Wash the whisk and the inside of the frother jug with warm, soapy water using the provided cleaning brush or a soft sponge. The non-stick coating and scratch-resistant materials make cleaning easier.
4. Rinse thoroughly with clean water and dry immediately with a soft cloth.
5. Do not use abrasive cleaners, metal scouring pads, or harsh detergents, as these can damage the non-stick coating.
6. Wipe the exterior of the frother jug and the power base with a damp cloth. Never immerse the frother jug exterior or the power base in water or any other liquid.
7. The frother jug and whisks are not dishwasher safe. Hand wash only.

Storage:

Store the frother in a cool, dry place when not in use. Ensure the whisk is stored inside the jug or in a safe place to prevent loss.

Troubleshooting

If you encounter issues with your frother, please refer to the following table for common problems and solutions:

Specifications

Warranty and Support

PARIS RHÔNE products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official PARIS RHÔNE website or contact customer support.

If you have any questions, concerns, or require assistance with your product, please contact PARIS RHÔNE customer support. Please have your model number (PE-MF010) and purchase information ready when contacting support.

For the most up-to-date support information, visit: PARIS RHÔNE Official Store