Hyper Tough 1000-Lumen Corded LED Work Light User Manual

Introduction

Thank you for choosing the Hyper Tough 1000-Lumen Corded LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.

This durable and versatile work light is designed to provide bright, long-lasting illumination for various indoor applications such as garages, workshops, construction sites, attics, and warehouses. Its integrated LED technology ensures reliable performance without the need for bulb replacement.

Important Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical products.

• Read all instructions before using this product.
• This work light operates on 110-120V AC power. Ensure the power source matches the light's requirements.
• Do not operate the light with a damaged cord or plug. If damaged, have it repaired by a qualified service person.
• Do not immerse the light in water or use it in wet locations. This product is designed for indoor use only.
• Keep the cord away from heated surfaces.
• Do not modify the plug in any way.
• Always unplug the light from the power outlet before cleaning or performing any maintenance.
• Do not look directly into the illuminated LED.
• Ensure the light is placed on a stable, level surface or securely hung to prevent tipping.

Product Features

The Hyper Tough 1000-Lumen Corded LED Work Light is equipped with features designed for convenience and durability:

• 1000-Lumen output for bright illumination.
• Long-life integrated LED that never needs replacing.
• 360° foldable handle for easy adjustment, carrying, and positioning.
• Durable plastic body construction.
• Sturdy tempered glass lens for protection.
• Compact, fold-flat design for convenient storage and portability.
• 5-ft power cord with a 2-prong grounded plug.
• ETL certified for safety and quality.

Figure 1: Front view of the Hyper Tough 1000-Lumen Corded LED Work Light, showing the LED panel, red plastic body, black foldable handle, and power cord with plug.

Setup

Unpacking

1. Carefully remove the work light from its packaging.
2. Inspect the light for any signs of damage during shipping. Do not use if damaged.
3. Retain the packaging for future storage or transport.

Positioning the Work Light

The integrated 360° foldable handle allows for versatile positioning:

• As a Stand: Fold the handle to form a stable base, allowing the light to stand upright on a flat surface.
• For Hanging: Use the handle to hang the light from a hook or suitable support.
• Adjustable Angle: Loosen the adjustable angle knobs on either side of the light to tilt the light head up or down, then tighten the knobs to secure the desired angle.

Figure 2: The foldable handle (left) and adjustable angle knob (right) for versatile positioning.

Operating Instructions

Powering On/Off

1. Ensure the work light is positioned securely and the power cord is free from obstructions.
2. Plug the 2-prong grounded plug into a standard 110-120V AC electrical outlet.
3. Locate the power switch on the back of the light.
4. Flip the switch to the "ON" (I) position to illuminate the light.
5. Flip the switch to the "OFF" (O) position to turn off the light.
6. Unplug the light from the outlet when not in use.

Figure 3: Rear view of the work light, highlighting the power switch.

Maintenance

Cleaning

• Always unplug the work light before cleaning.
• Use a soft, damp cloth to wipe down the exterior of the light.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the plastic body or tempered glass.
• Ensure the light is completely dry before plugging it back in.

Storage

• When not in use, store the work light in a cool, dry place.
• The slim, fold-flat design allows for easy storage in compact spaces.
• Avoid storing in areas with extreme temperatures or high humidity.

Troubleshooting

If you encounter issues with your Hyper Tough 1000-Lumen Corded LED Work Light, refer to the table below for common problems and solutions:

If the problem persists after trying these solutions, please contact Hyper Tough customer support.

Specifications

Figure 4: Product dimensions for the Hyper Tough 1000-Lumen Corded LED Work Light.

Warranty and Support

Specific warranty details are not provided in this manual. For information regarding warranty coverage, technical support, or replacement parts, please contact Hyper Tough customer service directly. You can typically find contact information on the product packaging or the official Hyper Tough website.

Please have your product model number (1000-Lumen Corded LED Work Light) and purchase date available when contacting support.