Hyper Tough 2500-Lumen Corded LED Work Light User Manual

Introduction

Thank you for purchasing the Hyper Tough 2500-Lumen Corded LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.

The Hyper Tough 2500 Lumen Corded Work Light is designed to provide long-lasting, dependable LED illumination for various indoor applications such as garages, workshops, construction sites, attics, house renovations, warehouses, and barns. Its robust design includes a 360-degree swivel handle for easy adjustment and portability, a heavy-duty die-cast aluminum body, and sturdy tempered glass for durability.

Key Features

• 2500-Lumen Output: Provides bright and efficient illumination.
• Long-Life LED: Integrated LED light source that never needs replacing.
• 360° Foldable Handle: Allows for easy adjustment of lighting area, carrying, and compact storage.
• 5-ft Power Cord: Equipped with a 3-prong grounded plug for reliable power connection.
• Durable Construction: Features a heavy-duty die-cast aluminum body and sturdy tempered glass.
• Slim, Fold-Flat Design: Facilitates easy transport and storage.
• Adjustable Angle Knob: For precise light positioning.
• ETL Certified: Ensures compliance with safety standards.

Important Safety Instructions

When using electrical products, basic precautions should always be followed, including the following:

1. Read all instructions before using the product.
2. Do not operate the work light with a damaged cord or plug. If damaged, have it repaired by a qualified service person.
3. Do not use the work light if it has received a sharp blow, been dropped, or otherwise damaged.
4. Do not disassemble the work light. Incorrect reassembly may result in a risk of electric shock or fire.
5. To reduce the risk of electric shock, do not put the work light in water or other liquid.
6. Do not expose the work light to rain or wet conditions.
7. Always unplug the work light from the electrical outlet when not in use, before putting on or taking off parts, and before cleaning.
8. Ensure the work light is placed on a stable, level surface to prevent tipping.
9. Keep the work light away from flammable materials. The LED light can generate heat.
10. Do not stare directly into the light source when the work light is on, as it may cause eye strain or damage.

Package Contents

Please check the package contents to ensure all items are present and undamaged:

• Hyper Tough 2500-Lumen Corded LED Work Light (with integrated 5-ft power cord)

If any items are missing or damaged, please contact customer support.

Setup and Assembly

The Hyper Tough 2500-Lumen Corded LED Work Light comes pre-assembled and requires minimal setup.

1. Unfold the Handle: The integrated handle can be folded flat for storage. Gently pull the handle outwards from the main body until it locks into position, forming a stand or carrying handle.
2. Positioning: Place the work light on a stable, flat surface. The 360-degree swivel handle allows you to adjust the angle of the light to direct illumination where needed.
3. Power Connection: Ensure the work light is turned off before plugging it into a standard 110-120V AC grounded electrical outlet.

Image: Front view of the Hyper Tough 2500-Lumen Work Light with its dimensions (L7.09" x H5.05" x D1.67") clearly marked, illustrating its compact size.

Image: Side view of the Hyper Tough 2500-Lumen Work Light with its 360-degree foldable handle extended, demonstrating its use as a stable stand.

Operating Instructions

1. Power On/Off: Locate the power switch on the back of the work light. Flip the switch to the 'ON' position to illuminate the LED light. Flip it to the 'OFF' position to turn the light off.
2. Adjusting Light Angle: Loosen the adjustable angle knobs on both sides of the handle. Adjust the light head to the desired angle, then tighten the knobs to secure the position. The handle allows for a full 360-degree rotation.

Image: Rear view of the Hyper Tough 2500-Lumen Work Light, clearly showing the power switch and the integrated power cord connection point.

Image: Close-up view of the adjustable angle knob on the side of the Hyper Tough 2500-Lumen Work Light, used for securing the light head at the desired angle.

Care and Maintenance

• Cleaning: Always unplug the work light before cleaning. Use a soft, damp cloth to wipe down the exterior. Do not use abrasive cleaners or solvents. Ensure the light is completely dry before plugging it back in.
• Storage: When not in use, store the work light in a cool, dry place, away from direct sunlight and moisture. The foldable handle allows for a slim, fold-flat design for easy storage.
• Cord Care: Inspect the power cord regularly for any signs of damage. Do not wrap the cord tightly around the light.
• LED Replacement: The integrated LED light source is designed for long life and will never need replacing under normal use. Do not attempt to replace the LED.

Troubleshooting Guide

Product Specifications

Warranty Information

Hyper Tough products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage due to misuse, abuse, neglect, unauthorized repairs, or normal wear and tear.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hyper Tough website.

Customer Support

If you have any questions, require assistance, or need to report an issue with your Hyper Tough 2500-Lumen Corded LED Work Light, please contact Hyper Tough customer support. Have your product model and UPC (850011051375) ready when contacting support.

For the most up-to-date contact information, please visit the official Hyper Tough website or refer to the packaging.