DAYBETTER Under Cabinet Lighting System User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your DAYBETTER Under Cabinet Lighting System. This system features dimmable and tunable white LED strip lights, offering adjustable brightness and color temperature from warm white (2700K) to daylight white (6500K). It includes both RF remote and touch control options, a timing function, and a power-on memory function.

2. Package Contents

Please verify that all items listed below are included in your package:

• 12V Power Adapter
• 6 x LED Light Strips (total 20 ft)
• RF Remote Control
• LED Controller (with touch control functionality)
• Short Connectors (for connecting strips)
• Long Connectors (for connecting strips)

3. Setup and Installation

Follow these steps to properly install your under cabinet lighting system:

1. Prepare the Surface: Ensure the installation surface (e.g., under cabinet, shelf) is clean, dry, and free from grease or dirt. This will ensure optimal adhesion of the LED strips.
2. Measure and Cut (Optional): The LED strips are cuttable. If shorter lengths are required, cut the strips only at the designated cut marks (usually indicated by copper pads).
3. Connect Strips: Use the provided short or long connectors to link the LED strips together, forming the desired layout. Ensure proper alignment of the pins.
4. Attach LED Strips: Peel off the protective backing from the adhesive tape on the back of each LED strip. Carefully press the strips onto the prepared surface, ensuring firm contact along the entire length.
5. Connect Controller and Power: Connect the LED strips to the controller, and then connect the 12V power adapter to the controller. Plug the power adapter into a standard electrical outlet.

Figure 1: Example of LED strip installation under kitchen cabinets.

Figure 2: Example of LED strip installation under a desk shelf.

4. Operating Instructions

Your DAYBETTER Under Cabinet Lighting System can be controlled using the included RF remote or the integrated touch control on the LED controller.

4.1. Remote Control Functions

The 17-key RF remote control allows for comprehensive management of your lighting. Refer to the remote layout image for button identification:

Figure 3: 17-Key RF Remote Control Layout.

• ON/OFF Button: Turns the lights on or off.
• Color Temperature/Speed Adjustment (+/-): Adjusts the color temperature or the speed of dynamic modes.
• Timing (60S): Sets the lights to automatically turn off after 60 seconds.
• Preset Color Temperatures: Direct access buttons for 2700K, 3200K, 4000K, 5000K, 5500K, and 6000K. Custom color temperature can be adjusted using the +/- buttons.
• Brightness Adjustment (Up/Down): Increases or decreases the light brightness.
• Dynamic Modes: Includes 1 flashing mode (adjustable brightness and speed), 1 jump mode (adjustable brightness and speed), and 2 breathing modes (only speed adjustable, brightness fixed).
• Sunrise Mode: Slowly transitions from warm white to positive white over 4 minutes. Brightness and speed are not adjustable.
• Sunset Mode: Reverses the Sunrise Mode transition. Brightness and speed are not adjustable.
• Night Mode: Sets the lights to a minimum brightness.

4.2. Touch Control

The LED controller also features a touch control for basic ON/OFF and brightness adjustments.

Figure 4: Dual control options for the lighting system.

4.3. Remote Pairing and Unpairing

The controller can be paired with a specific remote for exclusive control or unpaired to allow control by multiple remotes.

• Pairing: If the controller is not currently bound to a remote, turn on the lights. Press and hold the ON button on any RF remote for 2 seconds. The white light will flash twice to confirm successful pairing.
• Unpairing: To unpair, turn on the lights, then press and hold the OFF button on the currently bound remote. Alternatively, power the lights on and off 3 times in quick succession. The device will begin to flash white light continuously, indicating it is unpaired. After unpairing, you can long press the ON button of the RF remote you want to pair.

5. Maintenance

To ensure the longevity and optimal performance of your DAYBETTER Under Cabinet Lighting System, follow these simple maintenance guidelines:

• Cleaning: Gently wipe the LED strips and controller with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the product.
• Power Disconnection: Always unplug the power adapter from the outlet before performing any cleaning or maintenance.
• Avoid Water: This product is designed for indoor use and is not water-resistant. Avoid exposure to water or high humidity.

6. Troubleshooting

If you encounter any issues with your lighting system, refer to the following common problems and solutions:

• Lights Not Turning On:
  • Check all connections to ensure they are secure between the power adapter, controller, and LED strips.
  • Verify that the power adapter is properly plugged into a working electrical outlet.
  • Ensure the ON button on the remote or touch control has been pressed.
• Remote Control Not Responding:
  • Check the battery in the remote control and replace if necessary.
  • Ensure there are no obstructions between the remote and the controller.
  • Re-pair the remote control with the LED controller as described in Section 4.3.
• Lights Turning On/Off Unexpectedly:
  • This may occur if the controller is not paired to a specific remote and is picking up signals from other RF devices. Unpair the controller from all remotes, then pair it only with your desired remote as described in Section 4.3.

7. Specifications

8. Warranty and Support

This DAYBETTER Under Cabinet Lighting System is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For warranty claims, technical support, or any questions regarding your product, please contact DAYBETTER customer service through the official DAYBETTER Store on Amazon or refer to the contact information provided in your product packaging.

Visit the official DAYBETTER Store: DAYBETTER Store