1. Introduction and Overview
The DJI Avata Pro-View Combo offers an immersive first-person view (FPV) flight experience. This compact and agile drone is designed for dynamic aerial maneuvers and high-quality video capture, featuring a built-in propeller guard for enhanced safety.
This combo includes the DJI Avata drone, DJI Goggles 2, and DJI Motion Controller, providing intuitive control and a rich sensory experience.
Key Features:
- Immersive Flight Experience: Achieved with DJI Goggles 2 and DJI Motion Controller.
- Intuitive Control: DJI Motion Controller allows for easy hand and head movements to control flight.
- High-Quality Video: Features a 1/1.7-inch sensor, 155° FOV, and flagship stabilization for 4K footage.
- Compact and Agile Design: Enables flight in tight spaces and easy portability.
- Enhanced Safety: Built-in propeller guard, Emergency Brake button, and downward sensors.
- Extended Flight Time: Approximately 18 minutes of flight duration.
- Advanced Transmission: DJI O3+ video transmission provides a sharp HD live feed up to 10 km.
Figure 1: DJI Avata Pro-View Combo components including the drone, Goggles 2, and Motion Controller.
2. What's in the Box
The DJI Avata Pro-View Combo package includes the following items:
- DJI Avata Drone ×1
- DJI Avata Intelligent Flight Battery ×1
- Propellers (Pair) ×3
- DJI Avata Power Adapter ×1
- Gimbal Protector ×1
- Type-C to Type-C PD Cable ×1
- Screwdriver ×1
- Screws (M2x7) ×4
- DJI Goggles 2 ×1
- DJI Goggles 2 Battery ×1
- DJI Goggles 2 Eyeglass Frames (Pair) ×1
- DJI Goggles 2 Screen Protector ×1
- DJI Goggles 2 Headband ×1
- DJI Goggles 2 Power Cable ×1
- DJI Goggles 2 Dual-Band Antenna (Pair) ×1
- DJI Goggles 2 OTG Cable ×1
- DJI Motion Controller ×1
- Lanyard ×1
Figure 2: All components included in the DJI Avata Pro-View Combo package.
3. Setup Guide
3.1 Charging Batteries
Before first use, fully charge the Intelligent Flight Battery for the DJI Avata drone and the DJI Goggles 2 Battery using the provided power adapter and cables. Ensure all connections are secure.
3.2 Drone Preparation
- Install the propellers onto the drone motors. Ensure they are securely fastened.
- Remove the gimbal protector before powering on the drone.
- Insert the Intelligent Flight Battery into the drone until it clicks into place.
3.3 Goggles 2 Setup
- Attach the dual-band antennas to the DJI Goggles 2.
- Connect the DJI Goggles 2 Battery to the goggles using the power cable.
- Adjust the headband for a comfortable fit.
- Install the eyeglass frames if needed for vision correction.
3.4 Pairing Devices
Follow the on-screen instructions in the DJI Goggles 2 to pair the drone and the Motion Controller. Typically, this involves pressing and holding the power buttons on each device until they enter pairing mode and connect.
4. Operating Instructions
4.1 Basic Flight Controls (with DJI Motion Controller)
The DJI Motion Controller provides an intuitive way to control the Avata drone:
- Trigger: Squeeze to accelerate forward.
- Wrist Movement: Swivel your wrist to turn corners or change direction.
- Brake Button: Press to stop the drone and hover in place.
- Lock Button: Press and hold to take off or land.
Figure 3: User operating the DJI Avata drone using the Motion Controller and Goggles 2 for an immersive flight experience.
4.2 Camera Operation and Video Recording
The DJI Avata is equipped with a high-performance camera. Video recording settings can be adjusted via the DJI Goggles 2 interface.
- Video Resolution: Supports up to 4K at 50/60fps.
- FOV: Features a super-wide 155° FOV for expansive shots.
- Stabilization: Utilizes RockSteady and HorizonSteady for smooth footage.
- Shutter Speed: Video: 1/8000-1/50 s, Photo: 1/8000-1/50 s.
Figure 4: Demonstration of super-smooth 4K video capture with stabilization features enabled and disabled.
4.3 Safety Features
The Avata drone incorporates several safety mechanisms:
- Built-in Propeller Guard: Protects propellers and allows the drone to handle minor impacts.
- Emergency Brake Button: Instantly stops the drone.
- Downward Obstacle Sensing: Available when used with DJI FPV Remote Controller 2 or DJI Motion Controller in N Mode or S Mode.
- Low-Altitude Flight: Designed to maintain a minimum distance of 0.25m from the ground.
Figure 5: Close-up view of the DJI Avata's integrated propeller guard, designed for enhanced flight safety.
5. Maintenance
5.1 Battery Care
- Store batteries in a cool, dry place away from direct sunlight.
- Do not overcharge or over-discharge batteries.
- If storing for extended periods, discharge batteries to approximately 50-60% capacity.
- Inspect batteries regularly for any signs of damage or swelling.
5.2 Cleaning
- Use a soft, dry cloth to clean the drone, goggles, and controller.
- For lenses on the goggles and drone camera, use a specialized lens cleaning cloth and solution.
- Avoid using harsh chemicals or abrasive materials.
5.3 Propeller Inspection
Regularly check propellers for any cracks, bends, or damage. Replace damaged propellers immediately to ensure safe flight. Use only genuine DJI replacement parts.
6. Troubleshooting
6.1 Drone Not Powering On
- Ensure the Intelligent Flight Battery is fully charged and correctly inserted.
- Press the power button once, then press and hold for two seconds to power on.
6.2 No Video Feed in Goggles
- Verify that the DJI Goggles 2 battery is charged and connected.
- Ensure the drone and goggles are properly paired. Refer to Section 3.4.
- Check for any obstructions or interference in the flight environment.
6.3 Drone Drifting During Flight
- Perform IMU calibration as per the DJI Fly app instructions.
- Ensure propellers are not damaged and are correctly installed.
- Check for strong winds or electromagnetic interference in the flight area.
6.4 Motion Controller Unresponsive
- Ensure the Motion Controller is charged.
- Re-pair the Motion Controller with the drone and goggles.
- Check for firmware updates for all devices via the DJI Fly app.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | DJI |
| Model Name | Avata |
| Item Model Number | QF2W4K |
| Color | Black |
| Product Dimensions | 7.1"L x 7.1"W x 3.1"H |
| Item Weight | 3.72 pounds |
| Video Capture Resolution | 4K |
| Effective Still Resolution | 12 MP |
| FOV | 155° (when aspect ratio is 4:3, 2.7K@50/60fps or 1080p@50/60fps) |
| Battery Capacity (Drone) | 3000 mAh (Intelligent Flight Battery) |
| Max Flight Time | Approx. 18 minutes |
| Max Transmission Range | 10 km (FCC) |
| Connectivity Technology | USB, Wi-Fi |
| Goggles 2 Dimensions (folded) | 167.40×103.90×81.31 mm |
| Goggles 2 Dimensions (unfolded) | 196.69×103.90×104.61 mm |
Figure 6: Detailed comparison of DJI Goggles models, including Goggles 2 specifications.
Figure 7: Comparison of DJI RC Motion 2 and DJI Motion Controller features and specifications.
8. Warranty and Support
DJI provides an official warranty for the Avata Pro-View Combo. For detailed warranty terms and conditions, please refer to the official DJI website or the warranty card included in your product packaging.
For technical support, troubleshooting assistance, or service requests, please contact DJI customer support. DJI offers one-stop technical support for their products.
You can find more information and support resources on the official DJI website: www.dji.com
Figure 8: Information highlighting DJI's commitment to quality, comprehensive product line, and official warranty support.
