Edillas Kids Digital Watch Instruction Manual

1. Product Overview

The Edillas Kids Digital Watch is designed for children aged 4-12, offering a range of features including time display, date, alarm, stopwatch, and a backlight. It is built with water resistance suitable for daily activities.

Figure 1: Front view of the Edillas Kids Digital Watch.

Watch Components

Familiarize yourself with the watch buttons and their functions:

Figure 2: Watch components and button labels.

• LIGHT Button: Activates the backlight.
• MODE Button: Cycles through display modes (Time, Alarm, Stopwatch).
• START Button: Used to start/stop stopwatch, adjust settings.
• RESET Button: Used to reset stopwatch, confirm settings.

2. Setup and Initial Configuration

Before using your watch, it is recommended to set the correct time and date.

2.1 Setting Time and Date

1. From the normal time display, press the MODE button three times to enter time setting mode. The seconds will begin to flash.
2. Press the RESET button to cycle through the settings: Seconds → Hour → Minute → Month → Date → Day of Week.
3. While a value is flashing, press the START button to adjust the value. Hold the START button to change values faster.
4. After setting all desired values, press the MODE button once to exit the setting mode and return to the normal time display.

2.2 12/24 Hour Format Selection

In the time setting mode (seconds flashing), press the START button when the hour is flashing to toggle between 12-hour (with 'AM'/'PM' indicator) and 24-hour formats.

3. Operating Instructions

3.1 Using the Backlight

Press the LIGHT button to illuminate the watch face for a few seconds, making it visible in low-light conditions.

Figure 3: Normal display mode vs. EL Light display mode.

3.2 Setting and Using the Alarm

1. From the normal time display, press the MODE button twice to enter alarm setting mode. The hour will flash.
2. Press the START button to adjust the hour.
3. Press the RESET button to switch to minute setting. The minutes will flash.
4. Press the START button to adjust the minutes.
5. Press the MODE button to exit alarm setting mode.
6. To turn the alarm ON/OFF: In normal time display, press and hold the RESET button, then press the START button. The alarm icon will appear/disappear.

3.3 Using the Stopwatch

1. From the normal time display, press the MODE button once to enter stopwatch mode. The display will show 00:00:00.
2. Press the START button to begin timing.
3. Press the START button again to pause timing.
4. While paused, press the RESET button to reset the stopwatch to 00:00:00.
5. Press the MODE button to exit stopwatch mode and return to the normal time display.

4. Maintenance and Care

4.1 Water Resistance

This watch is rated for 30M (3ATM) water resistance, meaning it is suitable for daily use, hand washing, splashes, and brief immersion in water. It is not recommended for swimming, diving, or hot water activities like showering or sauna, as steam and hot water can damage the seals.

Figure 4: Water resistance guidelines for the watch.

• Do not press any buttons while the watch is submerged in water.
• Avoid exposing the watch to extreme temperatures (hot or cold).
• After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.

4.2 Cleaning

Wipe the watch case and strap with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the watch's finish or seals.

4.3 Battery Replacement

When the display becomes dim or stops functioning, the battery may need replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

5. Troubleshooting

• Display is blank or dim: The battery may be low or depleted. Replace the battery.
• Time is incorrect: Re-set the time following the instructions in Section 2.1. Ensure the correct 12/24 hour format is selected.
• Alarm does not sound: Ensure the alarm is turned ON (alarm icon visible). Check if the alarm time is set correctly.
• Watch is not water resistant after battery change: Ensure the watch was properly sealed after battery replacement. This often requires professional service.
• Buttons are unresponsive: Try pressing the buttons firmly. If still unresponsive, a full reset might be needed (consult a professional if no external reset button is available).

6. Specifications

Figure 5: Physical dimensions and weight of the watch.

7. Warranty and Support

For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official Edillas brand store online. Keep your purchase receipt as proof of purchase.

Edillas Brand Store: https://www.amazon.com/stores/Edillas/page/B71FB916-5214-4D13-8F35-5D6CF8BC3697