Lamicall Magnetic Phone Ring Holder for MagSafe (Model RS06-EU-GN) Instruction Manual

1. Introduction

The Lamicall Magnetic Phone Ring Holder is designed to enhance the usability of your smartphone by providing a secure grip and versatile stand functionality. Its strong magnetic attachment ensures stability, while the 360-degree rotation and 90-degree flip features offer optimal viewing angles and comfortable handling. The slim and practical design ensures portability without interfering with your phone's camera.

Figure 1: Lamicall Magnetic Phone Ring Holder (Green)

2. Package Contents

• Lamicall Magnetic Phone Ring Holder
• Metal Ring (for non-MagSafe devices/cases)
• Transparent Protective Film (for non-MagSafe cases)
• Cleaning Wipes
• Instruction Booklet

3. Compatibility

This magnetic phone ring holder offers broad compatibility:

• Direct Use: Compatible with iPhone 12, 13, 14, 15, 16, 17 series and MagSafe-compatible cases. The strong built-in magnet allows for direct attachment.
• Use with Metal Ring: For Android phones and non-MagSafe cases, the included metal ring must be attached to the phone case to enable magnetic attachment.

Figure 2: Compatibility overview for MagSafe and non-MagSafe devices.

4. Installation Guide

4.1. For MagSafe Compatible Devices/Cases

Simply align the Lamicall Magnetic Phone Ring Holder with the MagSafe area on your iPhone (12 series or newer) or MagSafe-compatible case. The strong magnets will automatically snap it into place, providing a secure attachment.

4.2. For Non-MagSafe Cases / Android Phones (using Metal Ring)

If your phone or case is not MagSafe compatible, follow these steps to attach the included metal ring:

1. Clean the Surface: Use the provided cleaning wipes to thoroughly clean the back surface of your phone case where the metal ring will be attached. Ensure the surface is dry and free of dust or oils.
2. Apply Transparent Protective Film: Peel off the transparent protective film and carefully apply it to the cleaned area on your phone case. This film protects your case from potential residue when removing the metal ring.
3. Position the Metal Ring: Use the instruction booklet as a template to accurately position the metal ring on the transparent film. The template helps ensure optimal placement for magnetic strength and balance.
4. Attach the Metal Ring: Peel off the adhesive backing from the metal ring and firmly press it onto the transparent film, following the template's guidance. Apply pressure for a few seconds to ensure good adhesion.
5. Allow to Cure: Wait at least 1 minute (or as recommended in the instruction booklet) to allow the adhesive to fully stick and cure before attaching the magnetic phone ring holder.
6. Attach Ring Holder: Once the metal ring is securely attached, you can now magnetically attach the Lamicall Phone Ring Holder to it.

5. Operating Instructions

5.1. Using as a Grip

Insert your finger through the ring to secure your phone, preventing accidental drops. This allows for comfortable one-handed operation, making it easier to text, browse, or take photos and selfies.

Figure 3: One-hand operation with the ring holder.

5.2. Using as a Stand

The ring holder features 360-degree rotation and a 90-degree flip mechanism. This flexibility allows you to position your smartphone at various angles, both horizontally and vertically, for hands-free viewing. Simply pull out the ring and adjust it to your desired angle to use it as a desk stand.

Figure 4: Flexible 360° rotation and 90° flip for stand functionality.

Figure 5: Adjustable stand for various viewing needs.

5.3. Wireless Charging Compatibility

The Lamicall Magnetic Phone Ring Holder is designed to be compatible with wireless charging. If your phone supports MagSafe wireless charging, you do not need to remove the ring holder for charging. The metal ring, if used, is also designed not to interfere with wireless charging, and your phone will not overheat.

Figure 6: Wireless charging compatibility with the ring holder.

6. Maintenance

To ensure the longevity and optimal performance of your Lamicall Magnetic Phone Ring Holder, follow these maintenance guidelines:

• Cleaning: Wipe the ring holder with a soft, damp cloth to remove dust and fingerprints. Avoid using harsh chemicals or abrasive materials, as these can damage the finish.
• Storage: When not in use, store the ring holder in a clean, dry place.
• Avoid Extreme Conditions: Do not expose the product to extreme temperatures or direct sunlight for prolonged periods, as this may affect the magnetic properties or material integrity.

7. Troubleshooting

7.1. Weak Magnetic Attachment

• Check Compatibility: Ensure your phone or case is MagSafe compatible. If not, verify that the metal ring has been correctly installed on your non-MagSafe case.
• Proper Placement: For MagSafe devices, ensure the ring holder is perfectly aligned with the MagSafe circle on your phone or case. For metal ring users, ensure the metal ring is centered and fully adhered.
• Case Thickness: Very thick non-MagSafe cases might reduce magnetic strength even with the metal ring. Consider a thinner case or direct attachment if possible.

7.2. Ring Stiffness/Difficulty in Opening

• The ring mechanism is designed to be firm to provide stable stand functionality. With regular use, it may become slightly smoother.
• If it feels excessively stiff, ensure no debris is lodged in the hinge mechanism.

8. Specifications

9. Warranty and Support

Lamicall products are manufactured with quality and reliability in mind. For warranty information, technical support, or any inquiries regarding your product, please refer to the contact details provided in the original product packaging or visit the official Lamicall website.