Kotobukiya Hexagear HG079 Governor Heavy Armor Type: Luk Instruction Manual

1. Introduction

The Hexagear HG079 Governor, Heavy Armor Type: Luk, is a 1/24 scale plastic model kit representing a heavy-loaded mobilized infantry type from the Advanced Armor Project. This model features a magnified human body frame, designed for robust infantry battles without Hexa Gear. It boasts significant armor and burst force, making it a formidable unit. This manual provides detailed instructions for assembly, operation, and maintenance of your model.

2. Safety Information

Please read and understand all safety precautions before beginning assembly. Failure to do so may result in injury or damage to the product.

• Small Parts: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
• Sharp Edges: Some parts may have sharp edges or points. Handle with care during assembly to prevent cuts.
• Tools: Use appropriate tools (e.g., hobby knife, nippers) safely. Always cut away from your body.
• Ventilation: If using paints, glues, or other chemicals, ensure adequate ventilation.
• Adult Supervision: Adult supervision is recommended for younger builders.

3. Package Contents

Verify that all components listed below are present before starting assembly. Refer to the parts layout image for visual confirmation.

• Heavy Armor Type: Luk body x 1 set
• Giant Manipulator Parts for Left and Right Conversion x 1 set
• Attachment part for holding giant manipulator x 1
• 6 types of wrist parts for normal manipulator (Grasp, Palm, Weapon Handle (Normal), Weapon Handle (Angled), Hand Sign A, Hand Sign B)
• Leg thruster ignition parts x 4 sets
• Compatible joint parts for arms x 2
• Archive card x 1

4. Setup (Assembly)

Follow the numbered steps in the included instruction booklet for detailed assembly. The following provides general tips and highlights key features.

4.1 General Assembly Tips

• Carefully cut parts from the runners using nippers to avoid stress marks.
• Smooth any nubs with a hobby knife or sandpaper for a clean finish.
• Test fit parts before applying glue (if using) or firmly snapping them together.
• Pay attention to part orientation, especially for symmetrical components.

4.2 Specific Assembly Details

• Manipulator Assembly: The character's signature right fist features individually movable fingers. The palm includes a 3mm hole for securely holding weapons using the provided retention attachment part. The giant manipulator can be assembled for either the left or right side by remodeling.
• Shoulder Armor: The shoulder armor can be installed on either the left or right side by switching the armor components.
• Articulation: The abdominal section features a pull-out movable structure, allowing for dynamic action poses. The neck has 3-axis movement, and the shoulder parts incorporate forward swing movement. Both elbows and knees are double-articulated for extensive posing options.
• Booster Unit: The booster unit on the back of the waist connects via a 3mm joint at its base, allowing flexible movement. The nozzle tips also have 3mm holes for attaching separately sold modeling support goods, such as booster effects.
• Sensor Part: The sensor on the left side of the head is pre-painted for convenience.

5. Operating (Posing and Display)

The Hexagear HG079 Luk is designed for extensive posing and display, offering numerous articulation points and compatibility with other model series.

• Utilize the multi-axis joints in the neck, shoulders, abdomen, elbows, and knees to create dynamic and expressive poses.
• The 3mm hard points located throughout the body allow for customization with various modeling support goods and effect parts (sold separately).
• The left and right arms can be interchanged with parts from other Kotobukiya series such as Frame Arms Girl, Megami Device, Saturated Girl Garden, and Arcanadia, expanding customization possibilities.
• The model is compatible with separately sold flying bases for aerial poses.

5.1 Posing Examples

5.2 Scale and Compatibility

6. Maintenance

Proper maintenance will ensure the longevity and appearance of your model.

• Cleaning: Dust your model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or discoloration.
• Handling: Handle the model by its main body parts rather than delicate accessories or thin components to prevent breakage.

7. Troubleshooting

If you encounter issues during assembly or display, refer to these common solutions.

• Parts Not Fitting: Ensure you are using the correct parts for each step. Check for any excess plastic (nubs) that may be preventing a flush fit. Gently sand or trim as needed.
• Loose Joints: If a joint feels too loose, a thin layer of clear nail polish or hobby cement applied to the peg and allowed to dry can increase friction.
• Missing Parts: Double-check the package contents against the parts layout. If a part is genuinely missing, contact Kotobukiya customer support.
• Model Instability: For standing poses, ensure the feet are flat on the surface. If necessary, use a display stand (sold separately) for better stability, especially for dynamic poses.

8. Specifications

9. Warranty and Support

This product is a plastic model kit and typically does not come with a manufacturer's warranty for individual parts once assembled. However, if you encounter issues such as missing or defective parts upon initial inspection of a new, unopened kit, please contact Kotobukiya customer support directly.

For further assistance or inquiries, please visit the official Kotobukiya website or contact their customer service department. Contact information can usually be found on the product packaging or the manufacturer's website.