Introduction
This manual provides essential instructions for the proper use, care, and maintenance of your Lorus RL411BX9 Automatic Men's Watch. This timepiece features a self-winding mechanical movement, a durable stainless steel case, and a comfortable textile strap, offering reliable timekeeping without the need for a battery.
Image: Front view of the Lorus RL411BX9 automatic watch, showcasing its black dial, luminous hands and markers, day/date display, and black textile strap.
Key Features
- Stainless Steel Case: The robust stainless steel case provides durability and a classic, polished appearance.
- Flexible Textile Strap: A high-quality textile strap ensures maximum comfort on the wrist. The classic buckle allows for easy adjustment to fit various wrist sizes.
- 10 Bar Water Resistance: The watch is water-resistant up to 10 bar (100 meters), making it suitable for accidental water splashes during hand washing, rain, or perspiration. It is not intended for swimming or diving.
- Luminous Coating: Luminous material on the hands and markers ensures readability in low-light conditions.
- Automatic Movement: Powered by a self-winding mechanical movement, the watch operates without a battery, relying on the motion of your wrist.
- Day/Date Display: Conveniently displays the current day of the week and date.
Initial Setup
Winding the Watch
Your Lorus RL411BX9 watch is powered by an automatic mechanical movement and does not require a battery. To start the watch or if it has stopped due to lack of motion:
- Gently shake the watch from side to side for approximately 30 seconds to initiate the movement. This will build up a small power reserve.
- Wear the watch regularly. Normal daily activities will keep the mainspring wound.
Note: This model does not feature a manual winding function via the crown.
Setting the Time and Date
- Pull the crown out to the second click position (farthest out). The second hand will stop.
- Turn the crown to set the hour and minute hands. To ensure the AM/PM is correctly set for the date change, advance the hands past 12 o'clock. If the date changes, you are in the AM period.
- Push the crown back in to the first click position.
- Turn the crown to set the date and day. Avoid setting the date and day between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first adjust the time outside this range (e.g., to 6 AM), then set the date/day, and finally reset the time to the correct current time.
- Push the crown fully back into the normal position to start the watch.
Operation
Automatic Movement
The Lorus RL411BX9 is powered by the natural motion of your wrist. When worn, an oscillating weight (rotor) inside the watch rotates, winding the mainspring. A fully wound watch typically has a power reserve of approximately 40 hours, meaning it can continue to operate for this duration even when not worn. If the watch is not worn for an extended period, it will stop. Simply shake it gently to restart.
Water Resistance (10 Bar / 100 Meters)
This watch is designed with a water resistance of 10 bar (100 meters). This rating indicates it is suitable for everyday use, including resistance to splashes, rain, and showering. It is not recommended for swimming, diving, or prolonged submersion in water. Always ensure the crown is fully pushed in before any contact with water to maintain its water resistance.
Image: The Lorus RL411BX9 watch worn on a wrist, demonstrating its fit and appearance during casual wear.
Care and Maintenance
Cleaning
To clean the watch case and crystal, wipe gently with a soft, dry, lint-free cloth. For the textile strap, a mild soap solution and a soft brush can be used for cleaning, followed by thorough rinsing with clean water and air drying. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the watch's finish or strap.
Strap Care
The textile strap is durable but can show wear over time. To prolong its life, avoid prolonged exposure to direct sunlight, extreme temperatures, or harsh chemicals. If the strap becomes excessively dirty or worn, consider replacing it with an authorized Lorus strap.
Image: Detail of the textile strap and buckle mechanism on the Lorus RL411BX9 watch.
General Care
- Avoid exposing the watch to extreme temperatures (below 0°C or above 60°C).
- Keep the watch away from strong magnetic fields, which can affect timekeeping accuracy.
- Protect the watch from severe shocks or impacts.
- If the watch requires service or repair, always contact an authorized Lorus service center to ensure proper handling and genuine parts.
Troubleshooting
Watch Has Stopped
As an automatic watch, it will stop if not worn for an extended period (typically more than 40 hours). Gently shake the watch for 30 seconds to restart it. If it still does not start, ensure the crown is fully pushed in. If the issue persists, the watch may require professional inspection.
Date/Day Not Changing Correctly
Ensure the time is set correctly, especially the AM/PM cycle. If the date/day is set during the restricted hours (9 PM - 3 AM), it might not change correctly. Reset the time outside this window, then adjust the date/day, and finally reset the time to the current time. If the problem continues, seek professional assistance.
Inaccurate Timekeeping
Automatic watches can have slight variations in accuracy. If the watch is consistently running too fast or too slow beyond acceptable limits (e.g., more than +/- 30 seconds per day), it may require adjustment or regulation by a professional watchmaker.
Technical Specifications
| Feature | Detail |
|---|---|
| Model Number | RL411BX9 |
| Movement Type | Automatic Mechanical |
| Case Material | Stainless Steel |
| Strap Material | Textile |
| Water Resistance | 10 Bar (100 meters) |
| Case Diameter | Approximately 32.0 mm |
| Case Thickness | Approximately 8.0 mm |
| Luminous Elements | Hands and Markers |
| Functions | Hour, Minute, Second, Day, Date |
| Manufacturer | Lorus (Seiko Group) |
| Country of Origin | China |
Note: All dimensions and specifications are approximate and subject to change without notice.
Image: Side profile of the Lorus RL411BX9 watch, highlighting its case thickness and crown design.
Warranty and Support
Your Lorus watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase for detailed information regarding coverage and claims.
For service, repairs, or any support inquiries, please contact your authorized Lorus dealer or visit the official Lorus website for a list of authorized service centers in your area. Always ensure that any service is performed by qualified technicians using genuine Lorus parts.
