Introduction
Thank you for choosing the Kappesberg LI019 Industrial Coffee Table. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Image: The Kappesberg LI019 coffee table, showcasing its industrial design with a wooden top and metal frame, placed in a living room environment.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
- Use only the provided hardware. Substituting parts may compromise the table's stability and safety.
- Do not overtighten screws, as this can damage the material.
- Keep small parts away from children during assembly to avoid choking hazards.
- Do not stand or sit on the coffee table.
- Place the table on a level surface to prevent wobbling.
Parts List
Before starting assembly, verify that all components are included in the package:
- Tabletop (MDP)
- Drawer (MDP)
- Metal Frame/Legs
- Drawer Slides (Telescopic)
- Leveling Feet
- Assembly Hardware (screws, bolts, etc.)
Image: The Kappesberg LI019 coffee table with its drawer fully extended, revealing the telescopic slides and the adjacent open storage niche.
Setup and Assembly
Assembly typically requires two people. Follow the numbered steps in the included assembly diagram (if provided) for best results. A general sequence is outlined below:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface.
- Assemble Metal Frame: Connect the metal frame components using the provided screws and tools. Ensure all connections are secure but do not overtighten.
- Attach Leveling Feet: Screw the leveling feet into the bottom of the metal frame. These can be adjusted later to ensure stability.
- Install Drawer Slides: Secure the telescopic drawer slides to the designated areas on the table structure and the drawer itself. Ensure they are aligned correctly for smooth operation.
- Assemble Drawer: Construct the drawer box using the MDP panels and hardware. Insert the assembled drawer into the slides.
- Attach Tabletop: Secure the MDP tabletop to the assembled frame using the appropriate hardware.
- Final Adjustments: Once fully assembled, place the table in its desired location and adjust the leveling feet to eliminate any wobbling.
Image: Detail view highlighting the MDP structure of the table and the adjustable leveling feet on the metal frame, crucial for stability.
Operating Instructions
The Kappesberg LI019 coffee table is designed for functional use in living spaces.
- Drawer Use: The single drawer features telescopic slides for smooth opening and closing. Use it to store remote controls, magazines, or other small items. Avoid overloading the drawer to ensure longevity of the slides.
- Niche Storage: The open side niche provides additional space for decorative items, books, or quick-access storage.
- Surface Use: The tabletop is suitable for placing beverages, snacks, and decorative accents. Always use coasters under hot or wet items to protect the surface finish.
Image: The Kappesberg LI019 coffee table positioned in a living room, showcasing its functional design with a drawer and open niche.
Maintenance and Care
Proper care will extend the life and maintain the appearance of your coffee table.
- Cleaning: Wipe the surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for furniture. Avoid harsh chemicals, abrasive pads, or solvents.
- Spills: Clean spills immediately to prevent staining or damage to the finish.
- Heat and Moisture: Protect the tabletop from direct heat and excessive moisture. Always use coasters and placemats.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
- Hardware Check: Periodically check all screws and fittings to ensure they remain tight. Retighten if necessary, but do not overtighten.
Image: A close-up view of the table's surface, showcasing the Freijó finish and texture, emphasizing the need for proper care.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Uneven floor or loose leveling feet. | Adjust the leveling feet until the table is stable. Ensure all frame screws are tight. |
| Drawer does not slide smoothly. | Misaligned drawer slides or obstruction. | Check that the drawer slides are correctly installed and aligned. Ensure no objects are obstructing the drawer's path. Lubricate slides if necessary. |
| Parts do not fit together. | Incorrect orientation or wrong parts. | Refer to the assembly diagram to ensure correct part orientation. Verify you are using the correct hardware for each step. |
Image: A detailed view of the telescopic drawer slide mechanism, illustrating a common component that might require adjustment for smooth operation.
Specifications
- Model: LI019
- Brand: Kappesberg
- Dimensions (H x W x D): 43 cm x 91 cm x 45 cm (16.9 x 35.8 x 17.7 inches)
- Material: MDP (Medium Density Particleboard) and Metal
- Finish: Touch Paint (MDP), Epoxy Paint (Metal Frame)
- Color: Freijó / Matte Black
- Drawer: 1, with telescopic slides
- Shelf/Niche: 1
- Base Type: Legs with leveling feet
- Shape: Rectangular
- Style: Industrial
Image: The Kappesberg LI019 coffee table with its key dimensions (height, width, depth) clearly indicated.
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Kappesberg customer service directly. Keep your proof of purchase for any warranty claims.
Kappesberg Customer Service: Visit Kappesberg's official website for contact information