ATOTO AC-RCR01W HD 1080P Backup Camera User Manual

1. Product Overview

The ATOTO AC-RCR01W is an HD 1080P backup camera designed to enhance vehicle safety and parking assistance. It features a 150° wide viewing angle, strong light suppression, and a built-in G-Sensor for event detection. This camera is specifically compatible with selected ATOTO P8 series head units.

Key Features:

• HD 1080P Resolution: Provides clear and detailed video footage.
• 150° Wide Viewing Angle: Offers an expansive view of the area behind your vehicle.
• Strong Light Suppression: Reduces glare from bright lights for improved visibility, especially at night.
• Built-in G-Sensor: Automatically detects sudden impacts or collisions and saves critical video footage.
• Parking Monitor: Provides 24/7 surveillance when paired with a compatible power supply (sold separately).
• Automatic Recording: Starts recording automatically when the car starts (requires SD card).
• Reversing Guidelines: Displays adjustable guidelines on the P8 series unit for precise parking.
• USB-C Connectivity: Simple and reliable connection.

Important Compatibility Note: The AC-RCR01W is ONLY compatible with selected ATOTO P8 series head units that have the specific rear panel socket shown in the compatibility diagram. It is NOT compatible with other ATOTO products such as S8 series, F7 series, A6PF series, SA102 series, or other brands.

2. Setup and Installation

Follow these steps for proper installation of your ATOTO AC-RCR01W backup camera.

2.1 Package Contents

• ATOTO AC-RCR01W Backup Camera
• 8m Slim Extension Lead with USB-C Plug
• Mounting Hardware (screws, adhesive)

2.2 Installation Steps

1. Mount the Camera: Securely mount the camera on or above your vehicle's license plate. Ensure the camera has a clear, unobstructed view of the rear.

Figure 2.1: Camera components and suggested installation location.
2. Route the Cable: Carefully route the 8-meter extension lead from the camera to the location of your ATOTO P8 series head unit. Ensure the cable is protected from sharp edges, heat, and moving parts.
3. Connect to Head Unit: Plug the USB-C end of the extension lead into the designated rear camera input interface on your ATOTO P8 series head unit. Refer to your P8 series manual for the exact port location.


Figure 2.2: Compatibility check for ATOTO P8 series and other models. Ensure your P8 unit has the correct socket.

4. Connect to Reverse Light (Optional but Recommended): For automatic activation of reversing guidelines, connect the camera's trigger wire (usually red) to your vehicle's reverse light power supply. This allows the camera to activate automatically when the vehicle is put into reverse.
5. Insert MicroSD Card (for recording): If you intend to use the recording features, insert a MicroSD card (up to 128GB recommended, not included) into the designated slot on your P8 series head unit.

3. Operating Instructions

This section details the operational aspects of your AC-RCR01W backup camera.

3.1 Automatic Activation and Display

• When connected to the reverse light, the camera display will automatically appear on your ATOTO P8 series head unit screen when you shift into reverse gear.
• The display provides a clear HD 1080P view with a 150° wide angle, allowing you to see obstacles and surroundings behind your vehicle.


Figure 3.1: HD 1080P display and 150° wide viewing angle.

3.2 Reversing Guidelines

• The P8 series head unit will display dynamic or static reversing guidelines on the screen.
• These guidelines assist in judging distance and trajectory for parking maneuvers.
• You can adjust or disable these guidelines through the settings menu on your ATOTO P8 series head unit.

3.3 Parking Monitor (Requires AC-P8AC12, Sold Separately)

• When the AC-P8AC12 power supply is used, the parking monitor function provides 24/7 surveillance.
• If a sudden collision or bump is detected while the vehicle is parked, the P8 unit will activate and the AC-RCR01W camera will record 20 seconds of critical video footage.
• This footage is protected from being overwritten, serving as potential evidence.
• In standby mode, the system consumes less than 10mA, minimizing battery drain.


Figure 3.2: Parking Monitor feature and required accessory.

3.4 G-Sensor and Loop Recording

• The built-in G-Sensor automatically detects unusual changes in gravity, such as collisions. When detected, the video footage will be automatically saved as backup information and protected from being overwritten.
• The camera supports automatic loop recording. When the storage card is full, the oldest unprotected files will be overwritten by new recordings. The loop recording time is adjustable via the P8 series settings.

Figure 3.3: G-Sensor event detection and loop recording.

3.5 Strong Light Suppression (WDR)

• The camera features Wide Dynamic Range (WDR) technology for strong light suppression.
• This technology helps to prevent dazzling effects from bright headlights or strong sunlight, ensuring a clearer video feed both day and night.


Figure 3.4: Strong Light Suppression (WDR) in action.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your backup camera.

• Cleaning the Lens: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners that could scratch the lens.
• Cable Inspection: Periodically check the camera cable for any signs of wear, damage, or loose connections. Ensure it remains securely routed and protected.
• Software Updates: Keep your ATOTO P8 series head unit's firmware updated, as this may include improvements for camera functionality. Updates are typically available via OTA (Over-The-Air) through the FindApps application.
• MicroSD Card Management: If using a MicroSD card for recording, format it periodically (e.g., once a month) to maintain optimal recording performance and prevent data corruption. Back up any important footage before formatting.

5. Troubleshooting

If you encounter issues with your AC-RCR01W backup camera, refer to the following common troubleshooting steps:

6. Specifications

7. Warranty and Support

7.1 Product Care and Warranty

ATOTO provides 12 months of product care, with an additional 6 months available upon product registration, totaling up to 18 months of coverage.

7.2 Customer Support

For technical assistance, warranty claims, or any questions regarding your ATOTO AC-RCR01W backup camera, please contact ATOTO customer support through the following channels:

• Order Center: Access support via your purchase order history.
• Email: Contact support via eproductcase or support[at]atotoglobal.
• Online Resources: Visit the official ATOTO website or brand store for FAQs and additional resources.

For more information about ATOTO products and support, you can visit the ATOTO Brand Store.

8. Video Resources

No official product videos from the seller were found that meet the embedding criteria (m3u8 format or useful preview videos).