AMIR Digital Alarm Clock User Manual

Introduction

Thank you for choosing the AMIR Digital Alarm Clock. This modern desk clock features a vibrant rainbow LED display, temperature display, adjustable brightness, voice control, and 12/24H time format. Designed for convenience and functionality, it is perfect for your home, bedroom, or office.

Image: Front view of the AMIR Digital Alarm Clock displaying colorful digits.

Setup and Power Supply

The AMIR Digital Alarm Clock offers two power supply options:

• USB Power Supply: When powered by USB (cable included, AC adapter not included), the screen will always remain on. This is the recommended mode for continuous display.
• AAA Battery Power: When powered by 3 AAA batteries (not included), the screen will turn off after 10 seconds to enter power-saving mode. In this mode, the clock retains previous time settings even after a power outage, thanks to its memory function.

Ensure batteries are installed correctly, observing positive and negative terminals, if using battery power.

Image: Rear view of the clock highlighting the battery compartment and USB power input.

For a visual guide on power modes, refer to the video below:

Video: This video demonstrates the two power modes (battery and USB) and how the display behaves in each mode.

Operating Instructions

Setting Time and Date

The clock features a large LED display (6.3"x0.7~1"x2.36") for clear visibility. The "colon" between the hour and minute display flashes continuously.

Image: Top view of the clock showing control buttons and dimensions.

1. To set the time, press and hold the "MODE" button until the hour flashes.
2. Use the "UP" and "DOWN" buttons to adjust the hour.
3. Press "MODE" again, and use "UP" and "DOWN" to adjust the minutes.
4. To set the date, press "MODE" once more until the year flashes. Use "UP" and "DOWN" to set the year.
5. Press "MODE" again to set the month, then once more for the day.
6. Press "MODE" to confirm and exit setting mode.

For a detailed demonstration of setting the time, date, and other functions, please watch the official seller video:

Video: This video provides a step-by-step guide on how to set the time, date, and other features of the AMIR Digital Alarm Clock.

Adjustable Brightness

The clock offers 3 levels of brightness (Bright/Medium/Low). Simply press the "UP" or "DOWN" button to cycle through these levels.

Image: Comparison of the clock display at different brightness settings.

Night Mode

In Night Mode, the digital alarm clock automatically dims during 18:00-6:00 (default period). You can set a custom period for this mode.

• Press "MODE" 3 times to enter the night mode setting.
• Press "UP" or "DOWN" to turn Night Mode ON/OFF.
• When Night Mode is ON, long press "MODE" to enter the night mode time setting. The sequence is: start hour → start minute → end hour → end minute.
• To turn off the display completely while sleeping, press and hold the "SNOOZE" button for more than 3 seconds.

Setting Alarm and Snooze

The clock offers 3 alarm modes:

• Monday to Friday (1-5)
• Monday to Saturday (1-6)
• Monday to Sunday (1-7)

Image: Visual representation of the three alarm modes.

1. Long press "ALARM" to enter alarm setting mode.
2. Use "UP" and "DOWN" buttons to adjust the hour, minute, snooze time (1-60 minutes), and working day mode.
3. When the alarm goes off, press the "SNOOZE" button for extra sleep (1-60 minutes, as set). Press any other key to cancel the alarm.

Image: Illustration of the snooze function and corresponding buttons.

Voice Control & Power Saving Mode

When powered by batteries, the clock features voice control. You can activate the display by making noise (e.g., clapping hands, rapping on the table) or touching the clock.

Image: Demonstrates how to activate the clock display using sound or touch.

In power saving mode (battery powered), the LED display automatically turns off after 16 seconds of no operation, but the system maintains normal timing and temperature settings.

Cycle Display Mode (Time, Date, Temperature)

The clock can cycle through displaying time, date, and temperature. To activate this mode:

1. Press the "MODE" button twice.
2. Hold the "MODE" button until you hear a beep. The display will then cycle through time (10 seconds), date (3 seconds), and temperature (3 seconds).

To return to displaying time only, press the "MODE" button twice again and hold until you hear a beep.

Maintenance

To ensure the longevity and optimal performance of your AMIR Digital Alarm Clock:

• Clean the display and casing with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Keep the clock away from direct sunlight, extreme temperatures, and high humidity.
• If using batteries, replace them when the display becomes dim or unresponsive. Remove batteries if the clock will not be used for an extended period.

Troubleshooting

Specifications

Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact AMIR customer service through the platform where you purchased the product. Please retain your proof of purchase for warranty validation.