Science4you Dinosaur Fossil Excavation 3 in 1 - T-Rex, Triceratops, Stegosaurus Kit Instruction Manual

1. Safety Information

Warning: This kit is not recommended for use by children under 6 years of age. Adult supervision is advised during all excavation and assembly activities. Keep small parts away from young children to prevent choking hazards. Avoid inhaling dust generated during excavation. Work in a well-ventilated area.

2. What's Included

Your Science4you Dinosaur Fossil Excavation 3 in 1 kit contains the following items:

• Educational book in 9 languages (English, Portuguese, Spanish, Italian, French, Dutch, German, Catalan, and Greek)
• 3 Fossil excavation blocks (containing Tyrannosaurus rex, Stegosaurus, and Triceratops skeletons)
• 1 Chisel
• 1 Brush
• 1 Hammer

Image: The complete Science4you Dinosaur Fossil Excavation 3 in 1 kit packaging.

Image: Overview of the kit contents, including three excavation blocks and the provided tools.

3. Setup

1. Prepare Your Workspace: Choose a flat, stable surface for excavation. Cover the area with newspaper or a plastic sheet to contain dust and debris.
2. Gather Tools: Ensure you have the chisel, brush, and hammer readily available.
3. Optional - Soften the Block: For easier excavation and to reduce dust, you may lightly spray the excavation block with water or soak it for a few minutes. Do not over-soak, as it can make the material too soft.

4. Operating Instructions

4.1. Excavation

1. Begin Digging: Use the chisel and hammer to carefully chip away at the excavation block. Start from the edges and work your way towards the center.
2. Reveal Fossils: As you dig, you will begin to uncover the dinosaur bones. Be gentle to avoid damaging the fossil pieces.
3. Clear Debris: Use the brush to sweep away loose dust and expose the fossil pieces. For stubborn debris, you can use the chisel's pointed end.
4. Collect Pieces: Carefully remove each bone as it becomes fully exposed. Place them aside in a safe area.

Image: A child carefully excavating a fossil block using the provided tools.

4.2. Assembly

1. Clean Bones: Once all bones are excavated, gently clean any remaining dust or debris from each piece using the brush or a damp cloth.
2. Refer to Guide: Use the included educational book to identify the dinosaur and follow the assembly instructions for each specific skeleton (T-Rex, Triceratops, Stegosaurus).
3. Connect Pieces: Carefully connect the bone pieces according to the diagrams in the book. The pieces are designed to fit together securely.
4. Display: Once assembled, your dinosaur skeleton is ready for display!

Image: A fully assembled Triceratops skeleton, ready for display.

5. Maintenance

• Cleaning Tools: After each use, clean the chisel and brush with water to remove any plaster residue. Allow them to dry completely before storing.
• Storing Skeletons: Store assembled dinosaur skeletons in a safe place to prevent breakage.
• Disposal: Dispose of leftover plaster material responsibly according to local regulations.

6. Troubleshooting

• Block is too hard: If the excavation block is too difficult to chip, lightly spray it with water or soak it for a maximum of 1-2 minutes to soften the material.
• Difficulty assembling bones: Refer to the detailed diagrams in the educational book. Ensure you are matching the correct pieces for each dinosaur. Gentle pressure may be needed to connect some parts.
• Excessive dust: Work in a well-ventilated area. Lightly dampening the block can help reduce dust.

7. Specifications

• Product Dimensions: 9.25 x 8.66 x 2.55 inches
• Item Weight: 13.4 ounces
• Item Model Number: 3551
• Manufacturer Recommended Age: 8 years and up (Note: Safety information recommends 6+ with supervision)
• Release Date: August 9, 2022
• Manufacturer: Science4you

8. Warranty and Support

For any questions regarding product warranty, missing parts, or further support, please contact Science4you directly through their official channels or visit their Amazon Brand Store.