K&F Concept KF06.466

Download PDF
Contents

K&F Concept EF/EF-S to Sony E-Mount Electronic Lens Adapter Instruction Manual

Model: KF06.466

1. Introduction

The K&F Concept EF/EF-S to Sony E-Mount Electronic Lens Adapter is designed to allow Canon EF and EF-S mount lenses to be used on Sony E-mount mirrorless cameras. This adapter maintains electronic communication between the lens and camera, enabling features such as autofocus, aperture control, and image stabilization.

Please note: Auto focus functionality is supported in photo mode only, not in video mode.

2. Product Overview

K&F Concept EF-E Electronic Lens Adapter

Figure 1: Front view of the K&F Concept EF-E Electronic Lens Adapter, showing the E-mount side with electronic contacts.

K&F Concept EF-E Electronic Lens Adapter with C/P switch

Figure 2: Top view of the adapter, highlighting the C/P switch for focus mode selection.

Key Features:

  • Auto Focus & Aperture Control: Equipped with gold-plating contacts for high-speed autofocus, rapid detection, and accurate tracking. It enhances conductivity and effectively transmits EXIF information.
  • Electronic Adapter: Features a convert bracket with a 1/4 screw hole for direct installation onto a tripod head or quick release plate.
  • Lens Image Stabilizer Support: Supports the Image Stabilization (IS) function of compatible lenses, aiding in sharp images in various conditions, including low light or when shooting moving subjects.
  • Dual Focus Mode (C/P Switch): Allows quick switching between Contrast Detection Auto Focus (CDAF) and Phase Detection Auto Focus (PDAF) modes for optimized performance.

3. Compatibility

This adapter is compatible with Canon EOS EF and EF-S mount D/SLR lenses. It is designed for use with Sony E-mount mirrorless cameras, including but not limited to:

  • Sony Alpha Series: α7 I/II/III, α7R I/II/III/IV, α7S I/II/III, α9 I/II, α1, α3000, α3500, α5000, α5100, α6000, α6100, α6300, α6400, α6500, α6600
  • Sony NEX Series: NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7
  • Sony Professional Cameras: PXW-FX9, FX6, FX3, PXW-FS5M2, PXW-FS7M2, PXW-FS5, XDCAM FS5, FS5 II, FS7, FS7 II, FX3, FX6, FX9, CineAlta VENICE

For detailed information on lens and camera mount types, please refer to the manufacturer's specifications or the K&F Concept website.

Video 1: K&F Concept guide on how to choose the right lens adapter by identifying camera and lens mount types.

4. Setup Instructions

4.1 Attaching the Adapter to the Camera Body

  1. Ensure your camera is powered off.
  2. Remove the body cap from your Sony E-mount camera by twisting it counter-clockwise.
  3. Align the red dot on the adapter with the red dot on your camera's lens mount.
  4. Insert the adapter into the camera mount and rotate it clockwise until it clicks securely into place.

4.2 Attaching the Lens to the Adapter

  1. Remove the rear lens cap from your Canon EF/EF-S lens.
  2. Align the red dot on the lens with the red dot on the adapter.
  3. Insert the lens into the adapter and rotate it clockwise until it clicks securely into place.

Video 2: Demonstration of attaching an EF lens to a Sony E-mount camera using the adapter, showcasing the secure fit and electronic contacts.

Video 3: Visual guide on mounting a Canon EF lens onto a Sony E-mount camera body via the adapter, highlighting the ease of attachment.

5. Operating Instructions

5.1 Autofocus and Aperture Control

Once the lens and adapter are securely mounted, the electronic contacts facilitate communication between the Canon lens and the Sony camera. This enables:

  • Autofocus: The camera's autofocus system will operate with the attached Canon lens. The adapter supports high-speed autofocus for still photography.
  • Aperture Control: You can adjust the lens aperture directly from your camera body.
  • Image Stabilization: If your Canon lens has an Image Stabilizer (IS) function, it will be supported by the adapter.
K&F Concept EF-E Electronic Lens Adapter with C/P switch

Figure 3: The adapter features a C/P switch, allowing users to select between Contrast Detection Auto Focus (CDAF) and Phase Detection Auto Focus (PDAF) modes for optimal performance.

Video 4: Demonstration of auto-focus and aperture control with the adapter, showing quick and accurate focus acquisition.

5.2 Tripod Mounting

The adapter includes a built-in convert bracket with a 1/4-inch screw hole. This allows you to mount the camera and lens assembly directly onto a tripod or quick release plate, providing stability, especially with heavier lenses.

K&F Concept EF-E Electronic Lens Adapter with tripod mount

Figure 4: The adapter features a sturdy tripod mount for enhanced stability when using larger lenses.

6. Maintenance

To ensure the longevity and optimal performance of your K&F Concept lens adapter, follow these maintenance guidelines:

  • Cleaning: Use a clean, dry microfiber cloth to wipe the exterior of the adapter. Avoid using harsh chemicals or abrasive materials. For electronic contacts, use a clean, dry cotton swab or a specialized electronic contact cleaner.
  • Storage: When not in use, store the adapter with both front and rear caps attached in a dry, dust-free environment.
  • Handling: Always handle the adapter by its body. Avoid touching the electronic contacts or optical elements (if any).

7. Troubleshooting

7.1 Auto Focus Issues

  • Auto Focus in Video Mode: The adapter supports auto focus exclusively in photo mode. Auto focus is NOT available in video mode.
  • STM Lenses: Some STM (Stepping Motor) lenses may exhibit less optimal autofocus performance due to their design, which may not fully leverage the adapter's electronic pins for precise focus in all situations.
  • General Autofocus Performance: If autofocus is slow or inconsistent, ensure the lens and camera contacts are clean. Also, try switching between CDAF and PDAF modes using the C/P switch on the adapter.

7.2 Mounting Difficulties

  • If a lens is difficult to mount, ensure the lens release button on the adapter is fully depressed and the lens is aligned correctly before rotating. Do not force the lens.

8. Specifications

FeatureSpecification
Model NumberKF06.466
Package Dimensions4.69 x 4.09 x 2.44 inches
Item Weight9.5 ounces
ASINB0B7515PSF
Date First AvailableJuly 20, 2022
ManufacturerShenzhen Zhuoer Photograph

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your K&F Concept EF/EF-S to Sony E-Mount Electronic Lens Adapter, please visit the official K&F Concept website or contact their customer service directly. Keep your purchase receipt for warranty claims.

© 2023 K&F Concept. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.