SP CONNECT Adapter SPC (Model 52801) Instruction Manual

Introduction

The SP CONNECT Adapter SPC is designed to ensure compatibility between your existing SPC Phone Case and newer SPC+ head mounts. This adapter allows you to utilize your current SPC phone case with the expanded range of SPC+ mounting solutions, providing a lightweight, flat, and secure connection for your smartphone.

Setup and Installation

Follow these steps to properly install and use your SP CONNECT Adapter SPC:

1. Identify Your Mount: Ensure you have an SPC+ head mount. The adapter is specifically designed to bridge SPC phone cases with SPC+ mounts.
2. Attach the Adapter: Simply snap the SP CONNECT Adapter SPC onto your SPC+ head mount. It is designed for easy attachment and a strong hold.
3. Mount Your Device: Once the adapter is securely in place on the SPC+ mount, attach your SPC Phone Case (with your smartphone inside) to the adapter. Rotate your device 90 degrees clockwise until it locks into position.

Figure 1: Illustration of the SPC adapter (top) and its connection point on an SPC+ mount (bottom outline). The adapter snaps onto the mount, allowing an SPC phone case to be attached.

Operating Instructions

The SP CONNECT Adapter SPC facilitates the secure attachment of your SPC Phone Case to any SPC+ compatible mount. Once installed, operating the system is straightforward:

• Attaching Your Phone: Align your SPC Phone Case with the adapter on the mount. Gently press down and rotate your phone 90 degrees clockwise until you feel and hear a click, indicating it is securely locked.
• Detaching Your Phone: To remove your phone, rotate it 90 degrees counter-clockwise. Once unlocked, lift your phone from the adapter.

Always ensure your phone is securely locked into the adapter before engaging in activities where it might be subjected to movement or vibration.

Maintenance

The SP CONNECT Adapter SPC requires minimal maintenance. To ensure optimal performance and longevity:

• Cleaning: Wipe the adapter with a soft, damp cloth to remove dust or dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the material.
• Inspection: Periodically inspect the adapter for any signs of wear, cracks, or damage. If any damage is observed, discontinue use and consider replacing the adapter to ensure secure mounting.
• Storage: Store the adapter in a clean, dry place when not in use.

Troubleshooting

If you encounter issues with your SP CONNECT Adapter SPC, consider the following:

• Difficulty Attaching/Detaching:
  • Ensure the adapter is correctly aligned with the SPC+ mount and your SPC Phone Case is correctly aligned with the adapter.
  • Verify that no debris is obstructing the locking mechanism.
  • Apply gentle, firm pressure and a full 90-degree rotation. Do not force the connection.
• Loose Connection:
  • Check if the adapter is fully snapped onto the SPC+ mount.
  • Ensure your SPC Phone Case is fully rotated and locked onto the adapter. A distinct click should be felt.
  • Inspect the adapter and your phone case for any damage or wear that might prevent a secure fit.

If problems persist, refer to the support section for further assistance.

Specifications

Warranty Information

The SP CONNECT Adapter SPC comes with a Limited Warranty. The warranty period is 12 months from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.

For warranty claims or detailed terms and conditions, please contact SP CONNECT customer support.

Support and Contact

For further assistance, technical support, or to inquire about replacement parts, please visit the official SP CONNECT website or contact their customer service department.

You can also visit the SP CONNECT Store on Amazon for product information and resources.