Mignova 10-inch Tablet Case and Tempered Glass Screen Protector User Manual

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your Mignova 10-inch Tablet Case and Tempered Glass Screen Protector. This product is designed to offer robust protection and enhanced functionality for your compatible 10-inch tablet.

2. Package Contents

Please verify that all items are present in your package:

• 1 x Tablet Case (Navy+Green)
• 1 x Tempered Glass Screen Protector

3. Compatibility

This product is compatible with various 10-inch tablets, including but not limited to:

• TPSPAD Android 10 10 inch Tablet
• MAGCH M210 / M101 / X10 / L21 Tablet 10 inch
• MEIZE K116 / K118 Tablet 10 inch
• ZONKO K118 / K116 Tablet 10 inch
• Xiashuanghu RS10 Tablet 10 inch
• Kaktin 10 inch Tablet
• Habisder kt107
• Kaktin d10

4. Setup and Installation

4.1. Tablet Case Installation

1. Ensure your tablet is clean and free of dust or debris.
2. Carefully separate the silicone outer layer from the hard back cover.
3. Place your tablet into the hard back cover, ensuring it fits snugly.
4. Re-apply the silicone outer layer, making sure all edges and corners are properly seated. The precise cutouts allow easy access to all ports, sensors, speakers, and cameras.

4.2. Tempered Glass Screen Protector Installation

For optimal results, perform this installation in a dust-free environment.

1. Clean the Screen: Use the provided alcohol wipe to thoroughly clean your tablet screen. Follow with the microfiber cloth to remove any smudges or residue.
2. Remove Dust: Use the dust-absorber sticker to dab the screen and remove any remaining dust particles. Ensure the screen is completely dust-free.
3. Peel Off Protective Film: Carefully peel off the protective film from the adhesive side of the tempered glass screen protector. Avoid touching the adhesive surface.
4. Align the Protector: Align the screen protector with your tablet screen, paying close attention to the edges, camera, and speaker cutouts.
5. Apply: Once aligned, gently lower the screen protector onto the screen. It will adhere automatically.
6. Remove Bubbles: If any bubbles appear, gently push them towards the edges of the screen using the microfiber cloth or a soft card. The hydrophobic coating and one-push easy installation design help minimize bubbles.

Figure 1: Tablet case design featuring 3mm higher edges around the camera and screen to prevent scratches.

5. Operating Instructions

5.1. Using the Built-in Kickstand

The integrated kickstand allows for hands-free viewing and typing. Gently pull out the kickstand from the back of the case until it locks into position. It can be adjusted to provide different angles:

• Viewing Angle: Position the tablet upright for watching videos or presentations.
• Typing Angle: Position the tablet at a lower incline for comfortable typing.

To retract the kickstand, gently push it back into its slot until it is flush with the case.

Figure 2: The built-in kickstand supports both typing and viewing angles for versatile use.

5.2. Attaching the Adjustable Shoulder Strap

The adjustable and detachable shoulder strap provides a convenient way to carry your tablet.

1. Locate the attachment points on the corners of the tablet case.
2. Attach the clips of the shoulder strap to these points.
3. Adjust the strap length to your desired comfort for carrying the tablet over your shoulder or around your neck. The strap can also be used to hang the tablet, for example, on a car seat headrest for rear-seat viewing.

Figure 3: The tablet case offers multiple usage options, including a kickstand for hands-free use and an adjustable shoulder strap for portability and mounting.

Figure 4: Key features of the case include an adjustable shoulder strap and a built-in kickstand.

6. Maintenance

6.1. Cleaning the Case

To clean the silicone and hard back case, wipe it with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.

6.2. Cleaning the Screen Protector

The tempered glass screen protector can be cleaned with a microfiber cloth. For stubborn smudges, a screen cleaner spray designed for electronics can be used. The hydrophobic coating helps resist fingerprints and smudges.

6.3. General Care

Avoid exposing the product to extreme temperatures or direct sunlight for prolonged periods. While the case features thicker silicone corners for superior protection against drops, excessive force or impact should still be avoided.

Figure 5: The case features thicker silicone corners designed for superior protection against impacts.

7. Troubleshooting

7.1. Screen Protector Bubbles

If small bubbles remain after installation, they often disappear naturally within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and re-apply, pushing the bubble out with a soft cloth.

7.2. Case Fit Issues

Ensure your tablet model is listed in the compatibility section. If the case does not fit correctly, double-check that the tablet is properly seated within both the hard shell and silicone layers. Verify that no foreign objects are obstructing the fit.

8. Specifications

• Product Type: Tablet Case with Tempered Glass Screen Protector
• Compatible Tablet Size: 10 inch
• Case Material: Soft Silicone and Hard Back Cover
• Screen Protector Material: Tempered Glass
• Screen Protector Hardness: 9H
• Screen Protector Thickness: 0.33mm
• Screen Protector Transparency: 99.99% HD
• Special Features: Adjustable Shoulder Strap, Built-in Kickstand, Camera Protection (3mm raised bezel), Screen Protection (3mm raised bezel), Hydrophobic Screen Coating, Bubble-free installation, Scratch-resistant.
• Color: Navy+Green

9. Warranty and Support

For any questions, concerns, or support regarding your Mignova tablet case and screen protector, please contact the retailer or manufacturer directly. Please refer to your purchase documentation for specific warranty details.