Introduction
The MOMAN H3 Motorcycle Helmet Intercom is designed to provide clear communication and entertainment for riders. This wireless headset supports up to 6 riders for real-time conversations over a range of up to 2000 meters. It features DSP and CVC noise cancellation for superior sound quality, hands-free calling, music streaming, and FM radio. The H3 is built with IP65 waterproof rating and a robust design to withstand various weather conditions, making it suitable for most open-face, modular, and full-face helmets.
Image: The MOMAN H3 Motorcycle Helmet Intercom unit, showcasing its compact design and control knob.
Package Contents
Before installation, please verify that all components are present:
- MOMAN H3 Intercom Unit
- Headset with 40mm Speakers and Microphone
- Mounting Bracket (Clip-on)
- Velcro Mounting Base
- USB Charging Cable
- User Manual (this document)
Setup and Installation
Proper installation ensures optimal performance and comfort.
1. Choose Mounting Method
The H3 intercom can be installed using either the clip-on bracket or the adhesive Velcro base.
- Clip-on Bracket: Slide the bracket onto the edge of your helmet shell. Ensure it is securely fastened. This method is generally more secure and allows for easier removal.
- Velcro Mounting Base: Clean the desired mounting area on your helmet. Peel off the adhesive backing from the Velcro base and firmly press it onto the helmet. Allow sufficient time for the adhesive to cure before attaching the intercom unit.
2. Install Speakers and Microphone
Position the speakers inside the helmet's ear pockets. Ensure they are centered over your ears for the best audio experience. Route the microphone towards your mouth, ensuring it is close enough for clear voice pickup but does not obstruct your vision or comfort. Secure all wires within the helmet padding to prevent interference.
3. Charging the Device
Before first use, fully charge the H3 intercom. Connect the provided USB charging cable to the intercom unit and a compatible USB power source. The charging indicator light will show the charging status. A full charge provides approximately 30 hours of continuous use and 500 hours of standby time.
Operating Instructions
Familiarize yourself with the control knob and buttons for seamless operation.
Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds until the indicator light illuminates.
- Power Off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.
Bluetooth Pairing (Phone)
- Ensure the H3 is powered off.
- Press and hold the Power button for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for "MOMAN H3".
- Select "MOMAN H3" to connect. Once paired, the indicator light will flash blue slowly.
Intercom Pairing (Multi-Rider)
The H3 supports communication with up to 6 riders. For optimal performance, pair devices in sequence.
- Ensure both intercom units are powered off.
- On the first unit, enter pairing mode (press and hold Power for 5-7 seconds).
- On the second unit, enter pairing mode.
- Once both are in pairing mode, briefly press the Intercom button on either unit to initiate pairing. The units will connect automatically.
- Repeat this process for additional units, pairing each new unit to the last one in the chain.
Music Playback
- Play/Pause: Briefly press the Multi-function button (often integrated with the knob).
- Next Track: Rotate the knob clockwise.
- Previous Track: Rotate the knob counter-clockwise.
- Volume Up/Down: Rotate and hold the knob clockwise/counter-clockwise.
Phone Calls
- Answer Call: Briefly press the Multi-function button.
- Reject Call: Press and hold the Multi-function button for 2 seconds.
- Hang Up: Briefly press the Multi-function button during a call.
- Voice Assistant: Double-press the Multi-function button (if supported by your phone).
FM Radio
- Turn On/Off FM: Press the FM button.
- Scan Channels: Rotate the knob to search for available stations.
Maintenance
Proper care extends the life and performance of your H3 intercom.
- Cleaning: Use a soft, damp cloth to wipe the intercom unit. Avoid harsh chemicals or abrasive cleaners. Ensure the charging port cover is securely closed before cleaning.
- Storage: When not in use for extended periods, store the device in a cool, dry place. It is recommended to charge the battery at least once every three months to maintain battery health.
- Water Resistance: The H3 is IP65 waterproof, meaning it is protected against dust and low-pressure water jets. While it can withstand rain, avoid submerging the device in water. Ensure all port covers are sealed during wet conditions.
- Battery Care: Do not expose the battery to extreme temperatures. Avoid fully discharging the battery frequently, as this can reduce its lifespan.
Troubleshooting
If you encounter issues, refer to the following common solutions:
| Problem | Possible Cause / Solution |
|---|---|
| No power | Battery is discharged. Charge the device fully. |
| Cannot pair with phone | Ensure the H3 is in pairing mode (flashing red/blue). Check if Bluetooth is enabled on your phone. Try restarting both devices. |
| No sound or low volume | Check volume levels on both the H3 and your connected device. Ensure speakers are correctly positioned and connected. |
| Intercom connection unstable or short range | Ensure units are within the specified range (up to 2000m in open terrain, less in urban areas). Obstructions can reduce range. Re-pair units if necessary. |
| Microphone not picking up voice | Ensure the microphone is positioned correctly near your mouth and not obstructed. Check microphone connection. |
Specifications
| Feature | Detail |
|---|---|
| Model | H3 |
| Intercom Range | Up to 2000m (6 riders) |
| Connectivity | Wireless (Bluetooth 5.0) |
| Noise Cancellation | DSP & CVC |
| Water Resistance | IP65 |
| Battery Capacity | 1000mAh |
| Working Time | Up to 30 hours |
| Standby Time | Up to 500 hours |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Speaker Size | 40mm |
| Control Type | Knob |
| Item Weight | 12 ounces (approx. 340g) |
Warranty and Support
MOMAN products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official MOMAN website. If you require technical assistance or have questions not covered in this manual, please contact MOMAN customer support through their official channels.
Online Support: Visit the Moman Store on Amazon
