BBOUNDER led shop light

BBOUNDER 4FT Linkable LED Utility Shop Light Instruction Manual

1. Safety Information

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

  • Electrical Safety: Ensure power is disconnected at the circuit breaker before installation or maintenance.
  • Qualified Personnel: Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
  • Grounding: This fixture must be properly grounded.
  • Voltage: Verify that the supply voltage is compatible with the fixture's requirements (120 Volts).
  • Damage: Do not operate the fixture if it is damaged. Inspect for damage during unpacking.
  • Non-Dimmable: This fixture is non-dimmable. Do not connect to a dimmer switch.

2. Product Overview

The BBOUNDER 4FT Linkable LED Utility Shop Light provides bright, energy-efficient illumination for various applications. Featuring a durable 'D' shaped tube design, these lights offer 4400 lumens of 6500K cool daylight white light while consuming only 40W. They are designed for easy installation and can be daisy-chained to connect multiple units.

Image showing a brightly lit workshop with BBOUNDER LED shop lights installed, highlighting 6500K, 4400LM, 110LM/W, and 40W specifications.

Figure 2.1: Brightness and Efficiency. This image illustrates the superior brightness of the BBOUNDER LED shop lights in a workshop setting, emphasizing their 6500K color temperature, 4400 lumens output, 110 lumens per watt efficiency, and 40W power consumption.

Close-up image of the D-shaped light tube design, indicating enhanced durability and resistance to bending, dark spots, and damage.

Figure 2.2: D-Shaped Light Tube. This image highlights the unique 'D' shaped tube design, which contributes to the fixture's durability and prevents common issues like bending, dark spots, and damage.

3. Package Contents

Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

  • LED Shop Light Fixtures (Quantity as per pack)
  • 56-inch Power Cord with Plug
  • Mounting Hardware (Screws, Wall Anchors, Hanging Chains)
  • Linkable Connector Cables
Image showing multiple BBOUNDER LED shop lights hanging, illustrating the product's appearance and the included hanging chains.

Figure 3.1: Product and Components. This image displays several BBOUNDER LED shop lights, providing a visual representation of the fixtures and their hanging mechanism.

4. Installation

Before beginning installation, ensure the power supply is turned off at the circuit breaker.

4.1. Surface Mount Installation

  1. Mark the desired mounting locations on the ceiling or wall.
  2. Drill pilot holes at the marked locations. If mounting into drywall, insert wall anchors.
  3. Secure the mounting clips (if provided) or directly screw the fixture to the surface using the provided screws.
  4. Ensure the fixture is securely fastened.

4.2. Suspension Mount Installation

  1. Install ceiling hooks (not always included, may require separate purchase) into a sturdy ceiling joist or appropriate anchor.
  2. Attach the hanging chains to the fixture's mounting points and then to the ceiling hooks.
  3. Adjust the chain length to achieve the desired hanging height.

4.3. Daisy-Chain Linkability

These fixtures can be linked together to create a continuous lighting system. Up to 4 lights can be connected in a single daisy chain.

  1. Connect the first fixture to a power outlet using the provided 56-inch power cord.
  2. Using the linkable connector cables, plug one end into the output port of the first fixture and the other end into the input port of the next fixture.
  3. Repeat for additional fixtures, ensuring not to exceed the maximum of 4 linked lights.
Image demonstrating the daisy-chain linkable design, showing how multiple lights connect with a single power source.

Figure 4.1: Daisy-Chain Connection. This image illustrates the process of connecting multiple BBOUNDER LED shop lights in a daisy-chain configuration, allowing them to be powered from a single outlet.

5. Operating Instructions

Once installed and connected to a power source, the BBOUNDER LED Utility Shop Light can be operated using the integrated switch on the power cord.

  • Power On/Off: Use the switch on the power cord to turn the light fixture(s) on or off.
  • Instant On: The LED lights provide instant full brightness without warm-up time.

6. Maintenance

The BBOUNDER LED Utility Shop Light requires minimal maintenance. Always disconnect power before performing any maintenance.

  • Cleaning: Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check for any loose connections or signs of damage.
  • No User-Serviceable Parts: The LED components are integrated and not user-replaceable. Do not attempt to open or repair the fixture.

7. Troubleshooting

If you encounter issues with your BBOUNDER LED Utility Shop Light, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Light does not turn onNo power supply
Loose connection
Faulty fixture
Check circuit breaker and wall outlet.
Ensure all connections are secure.
Test with another working fixture or contact support.
Light flickersUnstable power supply
Loose connection
Incompatible dimmer (if mistakenly used)
Verify stable power source.
Check all wiring connections.
Ensure fixture is not connected to a dimmer switch.
Only some linked lights workFaulty link cable
Exceeded maximum linked lights
Faulty individual fixture
Test link cables or replace.
Ensure no more than 4 lights are daisy-chained.
Isolate the faulty fixture by testing individually.

8. Specifications

FeatureSpecification
BrandBBOUNDER
Model Numberled shop light
Light Source TypeLED
Brightness4400 Lumens
Color Temperature6500 Kelvin (Cool Daylight)
Wattage40 Watts
Voltage120 Volts
Product Dimensions48"L x 6.38"W x 7.28"H
MaterialPolycarbonate (PC)
Mounting TypeHanging or Surface Mounted
Average Life50000 Hours
Special FeaturesEnergy saving, Instant on, No stroboscopic, Non dimmable, Shatter resistant

9. Warranty and Support

BBOUNDER products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BBOUNDER website.

Customer Support: For assistance, please contact BBOUNDER customer service at [Insert Customer Service Contact Information Here] or visit BBOUNDER Store on Amazon.

© 2023 BBOUNDER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.