1. Introduction
Thank you for purchasing the TESSAN Power Strip, Model TS-PS04JP00. This power strip is designed to provide convenient and safe power distribution for your electronic devices. It features multiple AC outlets, USB charging ports, individual switches for energy saving, and built-in surge protection. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

Image 1.1: Overview of the TESSAN Power Strip.
2. Product Features
- 12 AC Outlets & 3 USB Ports: Provides ample power connections for various devices.
- Master & Individual Switches: A master switch controls all outlets, while 6 individual switches allow separate control over specific AC outlets for energy efficiency.
- Thin 45° Angled Plug: Designed to fit in tight spaces behind furniture without blocking other wall outlets.
- Surge Protection: Protects connected devices from power surges and lightning strikes.
- Overload Protection: Automatically cuts power in case of an overload to prevent damage.
- Wide Outlet Spacing: Generous 38.5mm spacing between AC outlets accommodates bulky adapters without interference.
- Wall-Mountable Design: Features 4 hook holes and non-slip foot pads for flexible placement on walls, under desks, or on surfaces.

Image 2.1: Key features of the TESSAN Power Strip, including 12 AC outlets, 3 USB ports, and various safety functions.
3. Setup Instructions
- Unpack the Device: Carefully remove the power strip from its packaging. Inspect for any signs of damage.
- Choose a Location: Select a dry, indoor location away from water sources and direct sunlight. Ensure the 2-meter extension cord can reach the wall outlet without being stretched or obstructed.
- Connect to Power: Plug the power strip's thin 45° angled plug into a standard 125V AC wall outlet. The angled design allows it to fit behind furniture and not block adjacent outlets.
- Initial Power On: Press the master switch (located at one end of the strip) to turn on the power strip. The master power indicator will light up.
- Mounting (Optional): If desired, use the four wall-mounting hook holes on the back of the power strip to secure it to a wall or under a desk. Ensure the mounting surface is stable and capable of supporting the unit and connected devices.

Image 3.1: Example of the power strip mounted on a wall, demonstrating its flexible installation options.
4. Operating Instructions
4.1. Using AC Outlets
- The power strip has 12 AC outlets. 6 are 'always-on' outlets, and 6 are individually switched.
- Always-On Outlets: These 6 outlets are controlled solely by the master switch. When the master switch is ON, these outlets are powered.
- Individually Switched Outlets: These 6 outlets are controlled by both the master switch and their respective individual switch. For power to be supplied to one of these outlets, both the master switch and its individual switch must be ON. An indicator light next to each individual switch will illuminate when that outlet is active.
- Plug your devices into the appropriate AC outlets. The wide spacing (38.5mm) ensures that large power adapters do not block adjacent outlets.

Image 4.1: Detail of the master and individual switches on the power strip.
4.2. Using USB Charging Ports
- The power strip includes 3 USB-A charging ports.
- The maximum output for a single USB port is 5V 2.4A.
- The total maximum output when all 3 USB ports are used simultaneously is 5V 3.0A.
- Connect your USB-powered devices (e.g., smartphones, tablets, cameras, power banks) to these ports for intelligent charging.

Image 4.2: Detailed view of the 3 USB charging ports and their power specifications.
5. Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, store the power strip in a cool, dry place away from direct sunlight and moisture.
- Inspection: Periodically check the power cord and the unit for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately and contact support.
6. Troubleshooting
- No Power to Devices:
- Ensure the power strip's plug is securely inserted into the wall outlet.
- Check if the master switch is ON.
- For individually switched outlets, ensure both the master switch and the specific individual switch are ON.
- Verify that the wall outlet itself is functioning by plugging in another device.
- Power Strip Turns Off Automatically:
- This indicates that the overload protection has been activated. Disconnect some devices to reduce the load.
- Press the master switch to reset the overload protector and restore power.
- Surge Protection Indicator Off:
- If the surge protection LED indicator is off, it means the surge protection component may have been compromised after a significant power surge. The power strip may still function as a basic extension cord, but its surge protection capability is no longer active. It is recommended to replace the unit for continued surge protection.
- USB Ports Not Charging:
- Ensure the power strip is ON.
- Check the USB cable for damage and ensure it is properly connected to both the device and the power strip.
- Try a different USB port or cable.

Image 6.1: The overload protection switch, which automatically trips to prevent damage from excessive current.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | TS-PS04JP00 |
| AC Outlets | 12 (6 always-on, 6 individually switched) |
| USB Ports | 3 x USB-A |
| Single USB Output | 5V 2.4A Max |
| Total USB Output | 5V 3.0A Max |
| Voltage | 125V |
| Power Rating | 1500W Max |
| Cord Length | 2 meters |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Dimensions | 34 x 17 x 4 cm |
| Weight | 700 g |
| Safety Features | Surge Protection, Overload Protection |
8. Safety Information
- For indoor use only. Do not expose to moisture or use in wet environments.
- Do not exceed the maximum power rating of 1500W. Overloading can cause overheating and fire hazards.
- Do not disassemble or modify the power strip. This may void the warranty and create safety risks.
- Keep out of reach of children and pets.
- Ensure all plugs are fully inserted into the outlets. Loose connections can cause overheating.
- Do not use with damaged cords or plugs.
- Avoid running the power cord under carpets or in high-traffic areas where it could be damaged.

Image 8.1: The power strip features 1700J surge protection to safeguard electronic devices.
9. Warranty and Support
TESSAN products are designed for reliability and performance. For warranty information or technical support, please contact TESSAN customer service or visit the official TESSAN brand store.
TESSAN Brand Store: Visit TESSAN Store on Amazon
Please retain your purchase receipt as proof of purchase for warranty claims.