ODK 58-Inch L-Shaped Gaming Desk with USB Charging Port & Power Outlet User Manual

1. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Always assemble the desk according to the provided instructions.
• Ensure the desk is properly anchored to the floor to prevent tipping.
• Do not place heavy items on the desk that could cause it to become unstable.
• Always use the desk in a safe and responsible manner.
• For ease and safety, we recommend two people for assembly.
• Take out all parts from the package and check that all parts are included and in good condition before starting assembly.

2. Package Contents

Verify that all components are present before beginning assembly. Refer to the parts list in your physical manual for detailed identification.

• Main Desk Panels (A, B)
• Metal Frame Components (H, K, C, E, J, F)
• Storage Shelves (L, N, O)
• Monitor Shelf (Q) with Supports (R)
• USB Charging Port & Power Outlet Unit (T)
• Side Storage Bag (D)
• Diagonal Braces (S)
• Adjustable Foot Pads
• Assembly Hardware (Screws, Allen Wrench)

3. Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to have two people for easier and safer installation.

3.1. Watch the Official Installation Video

3.2. Step-by-Step Assembly

1. Assemble the Main Frame Legs (K and H):

   Install the foot pads (8) onto the bottom of frame components K and H. Then, connect crossbar G to frame H using screws (2). Ensure all connections are secure but do not fully tighten screws until instructed.

   

   Figure 1: Attaching foot pads and crossbar to frame components.

2. Connect Frame Components K and H:

   Use crossbar M to connect frame K and frame H with screws (3). Then, use crossbar I to connect K and H with screws (2). Pay close attention to the orientation of screw holes on I and M. Do not fully tighten screws at this stage.

   

   Figure 2: Connecting the main frame sections.

3. Assemble Storage Shelves (N and O):

   Install connectors P onto shelf panels O and N using screws (4). Ensure the screw holes are facing upwards as indicated in the video. These will form part of the L-shaped storage unit.

4. Attach Shelves O and N to the Frame:

   Carefully position shelves O and N within the assembled frame and secure them using screws (3). Refer to the video for precise placement. Fully tighten all screws for these shelves once positioned correctly.

   

   Figure 3: Installing the lower storage shelves.

5. Assemble the Remaining Frame Section (C and E):

   Install foot pads (8) onto frame component C. Connect crossbar E to frame C using screws (2). This forms the other main leg section of the desk.

6. Connect Frame Sections with Rod J and Shelf C:

   Fix rod F between rod J and shelf C using screws (2). This step connects the two main leg sections and forms the L-shape. Ensure the lengths L1 and L2 are correctly aligned as shown in the video for stability.
7. Install Desktop Panels (A and B):

   Carefully place desktop panels A and B onto the assembled frame. Align the screw holes and secure them using screws (1). Ensure the L-shaped configuration matches your desired orientation (left or right).

   

   Figure 4: Desktop panels installed, showing the L-shaped configuration.

8. Install Diagonal Brace (S):

   Attach the diagonal brace S to the rear of the desk frame using screws (4) and (6). This brace provides additional stability to the desk structure.
9. Assemble and Install Monitor Shelf (Q and R):

   Attach the three supports R to the monitor shelf Q using screws (1). Once assembled, place the monitor shelf onto the main desktop. Secure it in place using screws (1).

   

   Figure 5: Monitor shelf installed, providing an elevated surface.

10. Install Side Storage Bag (D):

    Attach the side storage bag D to the desk frame using screws (5). This provides convenient storage for small office items.

    

    Figure 6: Side storage bag for accessories.

11. Install USB Charging Port & Power Outlet Unit (T):

    Carefully insert the USB charging port and power outlet unit T into the designated cutout on the desktop. Secure it with screws (7).

    

    Figure 7: Integrated USB charging ports and power outlets.
12. Final Tightening:

    Once all components are in place, go back and fully tighten all screws to ensure the desk is stable and secure.

4. Setup and Usage

Your ODK L-Shaped Gaming Desk is designed for versatility and convenience.

• Reversible L-Shaped Design: The desk can be configured with the L-shaped section on either the left or right side to best fit your space and preference. This flexibility allows for optimal corner space utilization.
• USB Charging Ports & Power Outlets: Utilize the integrated 2 power outlets (120V/12A) and 2 USB charging ports (5V/2A) to conveniently power and charge your electronic devices, gaming gear, or Bluetooth accessories directly from your desk.
• Ample Desktop Space: The 58" W x 19.7" D x 30" H main desk provides a spacious workstation, capable of accommodating multiple monitors and laptops for writing, studying, or gaming.
• Storage Shelves: The under-desk bookshelf and storage shelves offer ample space for your PC case, books, files, and other devices, keeping your workspace organized.
• Monitor Shelf: The elevated monitor shelf helps improve sitting posture by raising your screen to an ergonomic height.
• Side Storage Bag: Use the attached side storage bag for quick access to small office supplies, headphones, or personal items.

Figure 8: The ODK L-shaped desk in a typical gaming setup.

5. Maintenance

To ensure the longevity and appearance of your ODK desk, follow these maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the wood surface.
• Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
• Placement: Avoid placing the desk in direct sunlight or near heat sources, as this can cause warping or fading.
• Weight Distribution: Distribute weight evenly across the desktop and shelves to prevent stress on any single point. The maximum weight recommendation is 84 pounds.

6. Troubleshooting

If you encounter any issues with your ODK desk, refer to the following common solutions:

• Desk Wobbles:
  • Ensure all screws are fully tightened.
  • Adjust the non-slip foot pads on the bottom of the legs to level the desk on uneven floors.
  • Verify that the diagonal braces are correctly installed and tightened.
• Parts Missing or Damaged:

  If your ODK L-shaped desk arrives damaged, missing parts, or scratched, please contact ODK customer support immediately. Our professional customer support team will assist you within 24 hours.

• USB Ports / Power Outlets Not Working:
  • Ensure the power cord for the integrated unit is securely plugged into a wall outlet.
  • Check if the wall outlet itself is functioning by plugging in another device.
  • Avoid "daisy-chaining" surge protectors into the mounted outlet.

7. Specifications

8. Warranty and Support

The ODK 58-Inch L-Shaped Gaming Desk comes with a limited warranty. For specific details regarding your warranty coverage, please refer to the warranty card included in your product packaging or contact ODK customer service.

For any questions, assistance with assembly, or to report missing/damaged parts, please contact ODK customer support. Our team is dedicated to providing prompt assistance.

Contact Information: Refer to your product packaging or the official ODK website for the most current customer support contact details.