Brigii Pet Hair Vacuum H5-Wall Mount User Manual

1. Introduction

Thank you for choosing the Brigii Pet Hair Vacuum H5-Wall Mount. This cordless handheld vacuum is designed for efficient cleaning of pet hair and dust from various surfaces. Featuring a powerful brushless DC motor, triple air filtration, and convenient USB-C charging, it offers a versatile solution for maintaining a clean environment.

Image: Brigii Pet Hair Vacuum H5-Wall Mount with various attachments.

2. Product Features

• Anti-tangle Hair Tool: Specifically designed for effective removal of pet hair from upholstery, stairs, and other surfaces, minimizing tangles.
• Powerful Suction: Equipped with a high-performance DC brushless motor offering two modes: standard (9kPa) and strong (14kPa) suction for diverse cleaning needs.
• Triple Air Filtration System: Efficiently filters pet hair and dust, ensuring clean air is expelled during operation.
• USB-C Rechargeable Battery: Features a safe power lithium battery with a 2000mAh capacity, fully charging within 4 hours and providing up to 22 minutes of powerful suction in standard mode.
• Portable and Lightweight: Weighing only 1.34 pounds, its handheld design allows for easy maneuverability and quick cleanups.

3. Package Contents

Verify that all items listed below are included in your package:

• Brigii Pet Hair Vacuum H5-Wall Mount Unit
• Anti-Tangle Hair Tool (Multi-surface tool)
• 2-in-1 Brush Nozzle
• Crevice Tool
• Wall Mount Base
• USB-C Charging Cable

Image: All components included in the Brigii Pet Hair Vacuum H5-Wall Mount package.

4. Setup and Charging

4.1 Initial Charging

1. Connect the provided USB-C charging cable to the charging port on the vacuum.
2. Plug the other end of the USB-C cable into a compatible USB power adapter (not included).
3. Allow the vacuum to charge for approximately 4 hours until the battery indicator lights show a full charge.

Image: The Brigii Pet Hair Vacuum H5-Wall Mount charging while mounted on a wall.

4.2 Wall Mount Installation

The wall mount base can be installed using two methods:

• Screw Fixation: Secure the wall mount to a suitable surface using screws (not included).
• Mounting Tape Fixation: Use strong adhesive mounting tape (not included) to attach the base to a clean, dry surface.

5. Operating Instructions

5.1 Power On/Off and Suction Modes

1. To power on the vacuum, press the power button (controller type: Push Button, control method: Touch).
2. The vacuum operates with two power levels: standard (9kPa) and strong (14kPa). Press the power button repeatedly to cycle through the suction modes.
3. To power off, press the power button until the device shuts down.

5.2 Using Attachments

Select the appropriate attachment for your cleaning task:

• Anti-Tangle Hair Tool (Multi-surface tool): Ideal for removing pet hair from carpets, stairs, furniture, and upholstery. Its design helps prevent hair from tangling around the brush.


Image: The Anti-Tangle Hair Tool effectively cleaning a sofa surface.

• 2-in-1 Brush Nozzle: Use the brush for dusting delicate surfaces or the nozzle for general vacuuming.


Image: The 2-in-1 Brush Nozzle cleaning crumbs from a kitchen counter.

• Crevice Tool: Perfect for reaching tight spaces, corners, and edges in your home or car.


Image: The Crevice Tool effectively cleaning along a baseboard.

5.3 Product Demonstration Video

Video: A demonstration of the Brigii handheld and cordless vacuum features.

6. Maintenance

6.1 Emptying the Dust Cup

1. Ensure the vacuum is powered off.
2. Locate the dust cup release mechanism (refer to product diagram in manual).
3. Detach the dust cup (0.4 Liters capacity) and empty its contents into a waste bin.

Image: Demonstrating how to empty the 400ml dust cup.

6.2 Cleaning the Filtration System

The vacuum features a Triple Filtration System with a HEPA filter. Regular cleaning is essential for optimal performance:

1. After emptying the dust cup, carefully remove the HEPA filter.
2. Tap the filter gently to dislodge any trapped dust and debris.
3. If necessary, rinse the filter under running water. Ensure it is completely dry before reinserting it into the vacuum.

Image: Diagram illustrating the Triple Filtration System.

7. Troubleshooting

If you encounter any issues with your Brigii Pet Hair Vacuum, please refer to the following common solutions:

• No Power: Ensure the battery is fully charged. Connect the USB-C cable and charge for 4 hours.
• Reduced Suction: Check if the dust cup is full and empty it. Clean the HEPA filter as described in the Maintenance section. Ensure all attachments are securely fitted.
• Unusual Noise: Check for any blockages in the nozzle or attachments. Ensure the dust cup and filter are correctly assembled.

For further assistance, please contact Brigii customer support.

8. Specifications

9. Warranty and Support

The Brigii mini hand vacuum comes with a 1-year assurance. If you have any issues with Brigii's products, please do not hesitate to contact Brigii's customer support team. We are committed to resolving your issues promptly and effectively.