1. Important Safety Instructions
Please read all instructions carefully before using this electric fireplace stove. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Always plug the fireplace directly into a wall outlet. Never use with an extension cord or relocatable power tap.
- Do not operate any fireplace with a damaged cord or plug, or if the heater malfunctions, has been dropped or damaged in any manner.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace.
- To prevent overheating, do not cover the heater.
- The air outlet is located at the top of the product. Ensure this area is not obstructed to maintain proper airflow and prevent safety hazards.
- This appliance is equipped with an automatic power-off function. If the fireplace is accidentally knocked over during use, it will automatically cut off power to enhance safety.
2. Product Overview
The Electactic 24-Inch Electric Fireplace Stove (Model S230B) is a free-standing infrared fireplace designed to provide warmth and ambiance. It features a realistic 3D flame effect with adjustable colors and brightness, two heating modes, and a convenient remote control.
Figure 1: Front view of the Electactic Electric Fireplace Stove with flames active.
3. Setup and Assembly
This section guides you through the initial setup and assembly of your electric fireplace stove.
3.1 Unpacking and Inspection
- Carefully remove all components from the packaging.
- Inspect the fireplace and all parts for any signs of damage. If any damage is found, do not use the appliance and contact customer support.
- Ensure all items listed in the 'What's in the Box' section are present.
Figure 2: Product dimensions and included components.
3.2 Assembly of Legs
The fireplace stove requires minimal assembly, primarily attaching the four legs.
- Carefully place the fireplace on a soft, non-abrasive surface to prevent scratching.
- Attach each of the 4 legs to the bottom of the fireplace using the provided 8pcs M5*12 screws. A Phillips head screwdriver is required (not included).
- Ensure all legs are securely fastened before placing the unit upright.
3.3 Placement
Choose a suitable location for your fireplace. Consider the following:
- Place the unit on a firm, level surface.
- Ensure there is adequate space around the unit for proper air circulation. Avoid placing it directly against a wall if it obstructs the rear air intake, as this can affect heating efficiency.
- Do not place the fireplace in an area where it could be easily tripped over or where the power cord could be damaged.
4. Operating Instructions
Your Electactic electric fireplace can be operated using the included remote control or the touch light panel on the unit.
4.1 Powering On/Off
- Plug the power cord into a standard 120V AC outlet.
- Press the Power button on the remote control or the touch panel to turn the appliance ON/OFF.
4.2 Adjusting Flame and Log Colors/Brightness
The fireplace features a curved LED screen for realistic 3D flame effects. You can customize the flame and log appearance.
Figure 3: Flame and log color/brightness options.
- Flame Colors: Use the Color A button on the remote to cycle through 4 flame colors: Red, Yellow, Orange, Blue.
- Log Colors: Use the Color B button on the remote to cycle through 4 log colors: Red, Yellow, Dark Red, Orange.
- Brightness: Use the Dimmer button to adjust the flame and log brightness through 5 levels (L1-L5).
- Flame Speed: Use the Flame Speed button to adjust the flame movement speed through 5 levels (U1-U5).
- There are 16 different combinations of flame and log colors available.
4.3 Heating Functions
The fireplace offers two heating modes for efficient warmth.
Figure 4: Heating port location and power settings.
- Press the Heater button on the remote or touch panel to activate heating.
- The display screen will show the heating mode: OFF (no heater), 500W (low heat), or 1500W (high heat).
- The unit can heat up to 1,000 square feet.
4.4 Timer Function
Set a timer for automatic shut-off.
Figure 5: Remote control layout.
- Press the Timer button on the remote control.
- Cycle through the available timer settings (1-8 hours) to select your desired shut-off time.
4.5 Low Noise Operation
The fireplace operates at a low noise level, typically below 40dB, ensuring it does not disturb sleep or daily activities.
Figure 6: Illustration of low noise operation and timer convenience.
5. Maintenance
To ensure the longevity and optimal performance of your Electactic electric fireplace, follow these general maintenance guidelines:
- Cleaning: Ensure the unit is turned off and unplugged before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or sprays.
- Air Vents: Periodically check and clean the air intake and outlet vents to ensure they are free from dust and debris. Blocked vents can reduce heating efficiency and pose a fire hazard.
- Storage: If storing the fireplace for an extended period, unplug it and store it in a dry, cool location, preferably in its original packaging.
6. Troubleshooting
This section addresses common issues you might encounter with your electric fireplace.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | Not plugged in; power outlet malfunction; power button not pressed. | Ensure the unit is securely plugged into a working outlet. Press the power button on the remote or touch panel. |
| No heat output. | Heater function not activated; low heat setting; obstructed air vents. | Press the heater button to select 500W or 1500W mode. Ensure air vents are clear. |
| Flame effect not visible or dim. | Brightness setting too low; unit off. | Adjust the brightness using the Dimmer button. Ensure the unit is powered on. |
| Unit automatically shuts off. | Overheat protection activated; unit was knocked over; timer expired. | Allow the unit to cool down. Ensure the unit is stable. Check timer settings. |
| Room not heating effectively. | Incorrect placement; large room size; low heat setting. | Ensure the unit is not placed directly against a wall, allowing for proper air intake. Select 1500W heating mode. Note that the unit is designed for rooms up to 1000 sq ft. |
If you experience any issues not covered in this section, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Electactic |
| Model Name | S230B |
| Product Dimensions | 23.5"L x 10.7"W x 24.3"H |
| Item Weight | 33.2 Pounds |
| Material | Cast Iron |
| Power Source | Electric |
| Voltage | 120VAC |
| Wattage | 500W / 1500W |
| Amps | 12.5 AMP |
| Heat Output | 5100 BTU |
| Heating Coverage | Up to 1000 square feet |
| Special Features | 4 Flame/Log Color, 5 Flame Speed, 5 Flame/Log Brightness, Remote control, Timer, Touch Button Light |
| Installation Type | Freestanding |
8. Warranty and Support
8.1 Warranty Information
This product comes with a Free Return and Replacement warranty. Please refer to your purchase documentation for specific terms and conditions regarding returns and replacements.
8.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact Electactic customer support through the retailer where the product was purchased. Keep your purchase receipt and model number (S230B) handy for faster service.
