Paris Rhone 2000W Energy-Saving Fan Heater

1. Important Safety Instructions

Please read all instructions carefully before using this appliance and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always place the heater on a firm, level surface.
• Do not cover the heater or block the air inlets/outlets.
• Keep flammable materials (furniture, curtains, paper, clothing) at least 1 meter (3 feet) from the front, sides, and rear of the heater.
• Do not use the heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
• This appliance is equipped with an Overheat Protection system that automatically shuts off the unit if it becomes too hot. If this occurs, unplug the heater, allow it to cool down, and check for any obstructions.
• The heater also features Tip-Over Protection, which automatically turns off the unit if it is accidentally knocked over. Place the heater upright on a stable surface to resume operation.
• Do not insert any objects into the ventilation or exhaust openings as this may cause electric shock or damage to the heater.
• Supervise children and pets when the heater is in use.

2. Product Overview

The Paris Rhone 2000W Energy-Saving Fan Heater is designed to provide efficient and comfortable heating for your indoor spaces. It features PTC ceramic heating technology for rapid warmth and a fan for air circulation.

Key Features:

• Fast Heating: PTC ceramic heating elements with a 7-blade fan ensure rapid heating within 3 seconds.
• 2-in-1 Functionality: Offers three modes: High Heat (2000W), Low Heat (1200W), and Fan Only (cool air).
• Precise Temperature Control: Digital thermostat allows temperature adjustment from 5°C to 35°C in 1°C increments via a touch panel. Settings are displayed on an LED screen.
• 70° Oscillation: Wide-angle oscillation distributes heat evenly across the room.
• Energy Saving: Automatically enters standby when the set temperature is reached and resumes operation when the room temperature drops.
• Safety Features: Includes overheat protection and tip-over protection.
• Timer: 12-hour timer for scheduled operation.

3. Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain the packaging for storage or future transport.
2. Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and to prevent fire hazards.
3. Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the voltage of your outlet matches the heater's requirements (refer to the product label or specifications section).

4. Operating Instructions

The heater features a touch control panel and an LED display for easy operation.

4.1 Power On/Off

• Press the Power button () on the control panel to turn the heater on or off.

4.2 Mode Selection

• Press the Mode button () to cycle through the available modes:
• High Heat (2000W): Provides maximum heating power.
• Low Heat (1200W): Provides moderate heating power.
• Fan Only (Cool Air): Circulates air without heating.

4.3 Temperature Setting

• In heating modes, use the '+' and '-' buttons to adjust the desired temperature.
• The temperature can be set from 5°C to 35°C in 1°C increments.
• The heater will automatically maintain the set temperature, turning on and off as needed to save energy.

4.4 Oscillation Function

• Press the Oscillation button () to activate or deactivate the 70° wide-angle oscillation.
• When activated, the heater will rotate from side to side to distribute heat more broadly.

4.5 Timer Function

• Press the Timer button () to set the operating time.
• The timer can be set for up to 12 hours. Each press typically increases the time by one hour.
• The heater will automatically turn off once the set time has elapsed.

5. Maintenance

Regular cleaning and maintenance will help ensure the longevity and efficient operation of your heater.

5.1 Cleaning

1. Before Cleaning: Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
2. Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
3. Air Inlets/Outlets: Use a vacuum cleaner with a brush attachment to remove dust and lint from the air inlets and outlets. Ensure these areas are clear of obstructions.
4. Storage: If storing the heater for an extended period, clean it thoroughly and store it in its original packaging in a cool, dry place.

6. Troubleshooting

If you encounter any issues with your heater, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Paris Rhone website. Keep your proof of purchase for warranty claims.