HIKVISION THC-B110-P

Download PDF
Contents

HIKVISION HiLook Bullet Turbo HD Camera THC-B110-P User Manual

Model: THC-B110-P

Introduction

This manual provides essential information for the installation, operation, and maintenance of your HIKVISION HiLook Bullet Turbo HD Camera, model THC-B110-P. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Safety Information

Always adhere to the following safety precautions to prevent injury or damage to the device:

  • Ensure the power supply voltage (12 VDC) matches the camera's requirements.
  • Do not expose the camera to extreme temperatures outside its operating range (-40°C to 60°C).
  • Avoid direct exposure to strong sunlight or bright light sources, which may affect image quality.
  • Handle the camera with care to prevent physical damage.
  • Installation should be performed by qualified personnel in accordance with local electrical codes.
  • Disconnect power before performing any maintenance or installation.

Package Contents

Verify that all components are present in the package:

  • 1 x HiLook Bullet Turbo HD Camera (THC-B110-P)
  • Mounting screws and anchors
  • Quick Start Guide (not included in this manual)

Product Overview

HiLook Bullet Turbo HD Camera THC-B110-P

Figure 1: Front view of the HiLook Bullet Turbo HD Camera THC-B110-P, showing the lens and adjustable mount.

The HiLook Bullet Turbo HD Camera THC-B110-P is a compact and discreet surveillance camera designed for both indoor and outdoor use. It features a 1MP CMOS image sensor, a 2.8mm fixed lens, and an IR range of up to 20 meters for night vision. The camera supports multiple video output formats (TVI/AHD/CVI/CVBS) and has an IP66 weatherproof rating.

Key Components:

  • Lens: 2.8mm fixed lens with a 92° field of view.
  • IR Illuminators: Built-in infrared LEDs for night vision up to 20 meters.
  • Adjustable Mount: Allows for pan (0° to 360°), tilt (0° to 180°), and rotation (0° to 360°) adjustments.
  • Video Output Cable: Connects to DVR/NVR systems.
  • Power Input: For 12V DC power supply.

Setup

1. Mounting the Camera

The camera is designed for wall mounting. Choose a suitable location that provides the desired viewing angle and is within reach of power and video cables.

  1. Mark the drilling positions on the wall using the camera's base as a template.
  2. Drill pilot holes and insert the provided wall anchors if necessary.
  3. Secure the camera base to the wall using the screws.
  4. Adjust the camera's angle (pan, tilt, rotation) to cover the desired area.

2. Connectivity

Connect the camera to your surveillance system:

  • Video Output: Connect the camera's video output cable to a compatible DVR/NVR system. The camera supports TVI, AHD, CVI, and CVBS formats, which can be switched as needed.
  • Power Supply: Connect a 12V DC power adapter to the camera's power input. Ensure the power source is stable and within the specified voltage range.

Operating

Basic Operation

Once powered on and connected to a DVR/NVR, the camera will begin transmitting video. You can view the live feed and recorded footage through your DVR/NVR interface.

Image Settings

The camera's image settings can typically be adjusted via the DVR/NVR's OSD (On-Screen Display) menu, if supported, or through compatible software. Key adjustable settings include:

  • Sharpness: Adjusts the clarity of the image.
  • Contrast: Controls the difference between light and dark areas.
  • Color Gain: Adjusts the intensity of colors.
  • DNR (Digital Noise Reduction): Reduces image noise, especially in low light.
  • Day/Night Mode: Can be set to Automatic, Color, or Black & White.
  • DWDR (Digital Wide Dynamic Range): Improves image quality in scenes with both very bright and very dark areas.
  • BLC (Backlight Compensation): Compensates for strong backlight to make foreground objects clearer.
  • AGC (Automatic Gain Control): Adjusts signal amplification to maintain image brightness in varying light conditions (High/Medium/Low/Off).

Maintenance

Cleaning

Regularly clean the camera lens and housing to ensure optimal performance. Use a soft, dry cloth. For stubborn dirt, a mild detergent can be applied to the cloth, but avoid direct spraying on the camera.

Environmental Considerations

The camera is rated IP66 for outdoor use, meaning it is protected against dust and powerful water jets. However, avoid submerging the camera in water. Ensure proper ventilation around the camera if installed in an enclosed space, though it is designed for outdoor conditions from -40°C to 60°C with humidity up to 90% (non-condensing).

Troubleshooting

ProblemPossible CauseSolution
No image/video outputNo power; incorrect video format; loose cable connection.Check power supply; ensure correct video format (TVI/AHD/CVI/CVBS) is selected on DVR/NVR; secure all cable connections.
Poor image quality (blurry/dark)Dirty lens; insufficient lighting; incorrect image settings.Clean the lens; ensure adequate lighting or rely on IR; adjust image settings (sharpness, contrast, BLC, AGC).
Night vision not workingIR illuminators off; insufficient power.Check Day/Night mode settings; verify stable 12V DC power supply.

Specifications

FeatureDetail
ModelTHC-B110-P
Image Sensor1 MP CMOS Image Sensor
Max. Resolution1280 (H) x 720 (V) (720p)
Min. Illumination0.01 Lux@(F1.2, AGC ON), 0 Lux with IR
Lens2.8 mm fixed lens
Field of View (FoV)92° (2.8 mm)
IR RangeUp to 20 meters
Video OutputTVI/AHD/CVI/CVBS Switchable
Operating Conditions-40°C to 60°C (-40°F to 140°F), Humidity: 90% or less (non-condensing)
Power Supply12 VDC ±15%
Power ConsumptionMax. 4W
MaterialPlastic
ProtectionIP66
Dimensions (L x W x H)Approx. 51 x 22 x 22 cm
WeightApprox. 150 g

Warranty

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact your local HIKVISION authorized dealer or visit the official HIKVISION website for support resources.

HIKVISION Official Website: www.hikvision.com

© 2025 HIKVISION. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.