1. Introduction
This manual provides instructions for the proper use and maintenance of your TOUCH TWO Bluetooth Beanie, model TR-B. This beanie integrates wireless audio functionality into a comfortable headwear item, allowing for music playback and hands-free calls.
Image 1.1: The TOUCH TWO Bluetooth Beanie, featuring a black knit design and a visible control panel on the side.
2. Product Overview
The TOUCH TWO Bluetooth Beanie is designed with integrated components for wireless audio. Familiarize yourself with the main parts:
- Integrated Speakers: Two high-quality speakers are built into the beanie, positioned over the ears.
- Control Panel: A small, external panel on the beanie allows for managing audio playback and calls.
- Microphone: A built-in microphone enables hands-free communication.
- Charging Port: A Type-C port for recharging the internal battery.
Image 2.1: Detail of the control panel and speaker placement on the beanie.
3. Setup Instructions
3.1. Charging the Beanie
Before initial use, fully charge the beanie. Locate the Type-C charging port, typically found near the control panel. Connect the provided Type-C charging cable to the port and the other end to a USB power source.
- Charging Time: Approximately 1.5 to 2 hours for a full charge.
- Battery Indicator: Refer to the indicator light on the control panel for charging status (e.g., red for charging, blue for fully charged).
Image 3.1: The Type-C charging port on the beanie.
3.2. Bluetooth Pairing
To connect the beanie to your device:
- Ensure the beanie is charged and powered off.
- Press and hold the Power/Play button on the control panel for approximately 3-5 seconds until the indicator light flashes blue and red, indicating pairing mode.
- On your smartphone, tablet, or other Bluetooth-enabled device, navigate to the Bluetooth settings.
- Search for available devices and select "TOUCH TWO Beanie" (or similar name) from the list.
- Once connected, the indicator light will typically show a solid blue or flash blue slowly.
The beanie utilizes Bluetooth V5.4 technology for a stable connection up to 33 feet (10 meters) and will automatically attempt to reconnect to the last paired device when powered on.
Image 3.2: The beanie is compatible with most Bluetooth-enabled devices.
4. Operating Instructions
The beanie features a 3-button control panel for managing audio and calls.
Image 4.1: Control panel button functions.
4.1. Power On/Off
- Power On: Press and hold the Play/Pause button for approximately 2 seconds.
- Power Off: Press and hold the Play/Pause button for approximately 2 seconds.
4.2. Music Playback
- Play/Pause: Click the Play/Pause button.
- Next Track: Click the Volume Up (+) button.
- Previous Track: Click the Volume Down (-) button.
- Volume Up: Long press the Volume Up (+) button.
- Volume Down: Long press the Volume Down (-) button.
4.3. Phone Calls
- Answer Call: Click the Play/Pause button.
- End Call: Click the Play/Pause button.
- Reject Call: Long press the Play/Pause button.
4.4. Voice Assistant (Siri)
- Activate Siri: Double-click the Play/Pause button.
5. Maintenance
5.1. Washing Instructions
The beanie is washable, but the electronic components must be removed first to prevent damage.
- Turn the beanie inside out to locate the slit or opening where the speakers and control panel are inserted.
- Carefully remove both speakers and the control panel module from their pockets.
- Hand wash the beanie with mild detergent and cold water. Do not machine wash or tumble dry.
- Allow the beanie to air dry completely before reinserting the electronic components.
- Once dry, carefully reinsert the speakers and control panel into their designated pockets, ensuring correct orientation.
Image 5.1: Steps for removing electronic components before washing.
6. Troubleshooting
If you encounter issues with your TOUCH TWO Bluetooth Beanie, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Beanie does not power on. | Low battery. | Charge the beanie for 1.5-2 hours. |
| Cannot pair with device. | Beanie not in pairing mode; Bluetooth off on device; device too far. | Ensure beanie is in pairing mode (flashing blue/red). Turn on Bluetooth on your device. Move device closer to the beanie (within 33 feet). |
| No sound or low volume. | Volume too low; beanie not connected; speakers dislodged. | Increase volume on both the beanie and your connected device. Re-pair the beanie. Check if speakers are correctly positioned inside the beanie. |
| Intermittent connection. | Interference; device too far; low battery. | Move away from sources of interference (e.g., Wi-Fi routers). Stay within 33 feet of your device. Charge the beanie. |
7. Specifications
- Model: TR-B
- Bluetooth Version: V5.4
- Wireless Range: Up to 33 feet (10 meters)
- Sound Output: Up to 110dB HD stereo sound
- Battery Type: Rechargeable Li-Ion
- Charging Time: 1.5 - 2 hours
- Music Playback Time: Up to 8 hours
- Call Time: Up to 10 hours
- Charging Port: Type-C
- Dimensions: 7 x 4.3 x 1.7 inches (packaged)
- Weight: 3.2 ounces
- Care Instructions: Hand Wash Only (after removing electronics)
8. Safety Information
- Do not expose the electronic components to water or excessive moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble or modify the electronic components.
- Keep out of reach of children.
- Dispose of the battery and electronic components responsibly according to local regulations.
- Prolonged listening at high volumes may cause hearing damage. Adjust volume to a safe level.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact TOUCH TWO customer service directly. Contact details can typically be found on the brand's official website or through your purchase platform.
