1. Product Overview
The Maxxima 6-inch Slim Square LED Downlight is a canless, ultra-thin recessed lighting solution designed for easy installation in various indoor and damp locations. This fixture features 5 CCT (Correlated Color Temperature) selectable options, allowing you to choose between 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight) to suit your preference. It provides 1000 lumens of light output while consuming only 12 watts of power, offering an energy-efficient alternative to traditional lighting.
The downlight comes with an integrated junction box and wiring hardware, eliminating the need for a separate can or housing. Its cast aluminum body ensures durability and a lightweight design. This product is ETL Listed and suitable for damp locations, making it ideal for bathrooms, kitchens, hallways, and more.
Image 1.1: Front view of the Maxxima 6-inch Slim Square LED Downlight.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only with 120V AC, 60Hz circuits.
- Do not modify the fixture. Any modification may void the warranty and create safety hazards.
- Suitable for damp locations. Do not use in areas where directly exposed to water.
- IC Rated: Suitable for direct contact with insulation.
- Ensure all electrical connections are secure and properly insulated.
3. Package Contents
- 1 x Maxxima 6-inch Slim Square LED Downlight
- 1 x Junction Box
- Wiring Hardware
- 1 x Foam Gasket
- Instruction Manual
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | MRL-S61245S |
| Size | 6 inches (Square) |
| Power Consumption | 12 Watts |
| Lumen Output | 1000 Lumens |
| Color Temperature (CCT) | Selectable: 2700K, 3000K, 3500K, 4000K, 5000K |
| Voltage | 120V AC |
| CRI | 82 |
| Beam Spread | 120° |
| Dimmable | Yes |
| Junction Box Dimensions | 1.4"H x 2.7"W x 4.11"D |
| Trim Size | 0.85" |
| Product Dimensions | 6.7 x 6.7 x 0.9 inches |
| Weight | 1 Pound |
| Material | Aluminum, Metal |
| Certifications | ETL Listed, IC Rated |
| Location Rating | Damp Location Suitable |
5. Setup and Installation
Before You Begin: Ensure power is turned OFF at the circuit breaker before starting installation to prevent electrical shock.
- Prepare the Ceiling Opening: Cut a square hole in the ceiling at the desired location. The recommended hole size for this 6-inch square downlight is approximately 6.25 inches x 6.25 inches.
- Connect the Downlight to the Junction Box: The downlight connects to the provided junction box via a male-female connector. Align the pins and push firmly until it clicks into place.
- Wire the Junction Box: Open the junction box cover. Connect the household electrical wires to the wires inside the junction box using the provided wiring hardware (wire nuts):
- Connect the black wire from the household circuit to the black wire of the junction box.
- Connect the white wire from the household circuit to the white wire of the junction box.
- Connect the ground (bare copper or green) wire from the household circuit to the green wire of the junction box.
- Install the Downlight: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the ceiling opening. The spring clips will automatically snap down and secure the fixture in place against the ceiling.
- Secure the Junction Box: Place the junction box inside the ceiling cavity, ensuring it is not pinched or damaged by the downlight or other structures.
Image 5.1: The downlight's cable connects to the junction box.
Image 5.2: Side view of the downlight, highlighting the spring clips for installation.
For a visual guide, please refer to the official installation video:
Video 5.3: Official installation and feature overview for the Maxxima 6-inch Slim Square LED Downlight.
6. Operating Instructions
6.1. Color Temperature (CCT) Selection
The Maxxima 6-inch Slim Square LED Downlight features a 5 CCT selectable switch located on the side of the junction box. This switch allows you to choose your preferred light color before or after installation. To change the CCT:
- Ensure power is OFF before accessing the junction box if it's already installed.
- Locate the CCT selection switch on the side of the junction box.
- Slide the switch to select one of the five available color temperatures: 2700K, 3000K, 3500K, 4000K, or 5000K.
- Restore power to test the selected CCT.
Image 6.1: Close-up view of the 5 CCT selection switch on the junction box.
Image 6.2: Illustration of how different CCTs (2700K to 5000K) appear in a room.
6.2. Dimming Functionality
This LED downlight is dimmable. To utilize the dimming feature, ensure you are using a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
7. Maintenance
The Maxxima 6-inch Slim Square LED Downlight requires minimal maintenance. The LED light source is integrated and not user-replaceable.
- Cleaning: Ensure power is OFF before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Maxxima support.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty fixture | Check circuit breaker and wall switch. Verify all wiring connections are secure (ensure power is OFF first). Contact Maxxima support if power is confirmed and connections are secure. |
| Light flickers or dims unexpectedly | Incompatible dimmer switch Loose wiring connection Voltage fluctuations | Ensure a compatible LED dimmer is used. Replace if necessary. Check wiring connections (power OFF). Consult an electrician to check household voltage. |
| Incorrect CCT displayed | CCT switch set incorrectly | Adjust the CCT selection switch on the junction box to the desired setting (power OFF). |
9. Warranty and Support
This Maxxima 6-inch Slim Square LED Downlight (Model MRL-S61245S) is backed by a 3-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact Maxxima customer support. Keep your proof of purchase for warranty validation.
Maxxima Customer Support: Refer to the contact information provided on the product packaging or the official Maxxima website for the most up-to-date support details.
