Introduction
The Pure Enrichment PureDry Elite Dehumidifier is designed to efficiently remove excess moisture from your living spaces, improving air quality and comfort. This manual provides essential information for the safe and effective operation and maintenance of your dehumidifier.
Important Safety Information
- Read all instructions before using the appliance.
- Ensure the power cord is not damaged. Do not operate with a damaged cord or plug.
- Do not immerse the unit, cord, or plug in water or other liquids.
- Keep the appliance away from heat sources, direct sunlight, and flammable materials.
- Always place the dehumidifier on a flat, stable surface.
- Do not block air inlets or outlets. Maintain proper ventilation.
- Unplug the unit before cleaning or performing any maintenance.
- This appliance is for indoor use only.
Package Contents
- PureDry Elite Dehumidifier
- 2L Water Tank (pre-installed)
- AC Power Adapter
- User Manual
Product Overview
Familiarize yourself with the components of your PureDry Elite Dehumidifier.
- Easy-Carry Handle: Retractable handle for convenient portability.
- Touch-Button Control Panel: Intuitive interface for operating the unit.
- Air Inlet/Outlet: Located on the sides and top for air circulation.
- Transparent 2L Water Tank: Removable tank for collecting condensed moisture.
- Water Tank Removal Lock: Secures the water tank in place.
- Power Port: For connecting the AC power adapter.
Setup
- Unpack the Dehumidifier: Carefully remove the dehumidifier and all accessories from the packaging.
- Position the Unit: Place the dehumidifier on a flat, stable surface in the desired location. Ensure there is adequate space around the unit (at least 4 inches) for proper air circulation. Avoid placing it against walls or furniture that could obstruct airflow.
- Connect Power: Insert the AC power adapter into the power port on the back of the dehumidifier, then plug the adapter into a standard electrical outlet.
- Ensure Water Tank is Correctly Inserted: Verify that the 2L water tank is securely in place. The unit will not operate if the tank is missing or improperly inserted.
Operating Instructions
Control Panel Functions
- Power Button (ON/OFF): Press to turn the dehumidifier on or off.
- Fan Speed Button (FAN): Toggle between two fan speed levels (Low/High) to adjust moisture removal rate.
- Timer Button (TIMER): Select from 3 pre-set timer settings (4H, 8H, 12H) for automatic shut-off.
- Light Button (LIGHT): Activates or deactivates the ambient light feature.
Initial Operation
- After plugging in the unit, press the Power Button to turn it on.
- Select your desired fan speed (Low or High) using the Fan Speed Button.
- Optionally, set a timer for automatic shut-off using the Timer Button.
- The dehumidifier will begin to extract moisture from the air.
Automatic Shut-Off
The PureDry Elite Dehumidifier features an intelligent auto shut-off function. When the 2L water tank is full, the unit will automatically turn off, and a red indicator LED will illuminate to notify you. This prevents overfilling and potential spills.
Continuous Drainage (Optional)
For continuous operation without needing to manually empty the tank, you can utilize the continuous drainage feature. This requires a compatible drainage hose (not included) to be connected to the unit's drainage port and directed to a suitable drain.
- Locate the drainage port on the back of the unit (usually covered by a rubber stopper).
- Remove the rubber stopper.
- Connect a drainage hose (ensure it's securely attached and has a downward slope for gravity drainage).
- Direct the other end of the hose into a floor drain, sink, or other appropriate drainage point.
- The unit will now continuously drain collected water, eliminating the need for manual tank emptying.
Maintenance
Emptying the Water Tank
- When the tank is full, the unit will automatically shut off and the red indicator light will turn on.
- Gently pull out the water tank from the front of the unit.
- Carefully carry the tank to a sink or drain.
- Pour out the collected water.
- Rinse the tank with clean water and dry it thoroughly before reinserting.
- Slide the empty water tank back into the dehumidifier until it clicks securely into place. The unit will resume operation if the power is on.
Cleaning the Unit
- Wipe the exterior of the dehumidifier with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
- Periodically clean the air inlet and outlet grilles to prevent dust buildup, which can affect performance. Use a soft brush or vacuum cleaner attachment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dehumidifier does not turn on. | Unit is not plugged in; power outlet is not working; water tank is full or incorrectly inserted. | Ensure power adapter is securely plugged into unit and outlet. Check the power outlet. Empty and correctly reinsert the water tank. |
| No water is collected. | Room humidity is too low; ambient temperature is too low; air inlets/outlets are blocked. | Ensure room humidity is above 45% RH. Ensure room temperature is above 41°F (5°C). Clear any obstructions from air inlets/outlets. |
| Unit is noisy. | Unit is not on a flat surface; air inlets/outlets are blocked. | Place the unit on a flat, stable surface. Clear any obstructions from air inlets/outlets. |
Specifications
- Brand: Pure Enrichment
- Model: PEDEH2L
- Color: Gray
- Dimensions: 5.5"D x 9.9"W x 13.2"H
- Weight: 6.39 pounds
- Water Tank Capacity: 2 Liters
- Dehumidification Capacity: 0.6 Liters per Day (approx. 20 oz)
- Floor Area Coverage: Up to 300 Square Feet
- Number of Speeds: 2
- Special Features: Automatic Shutoff, Quiet Operation, Timer
- Wattage: 75 watts
- UPC: 817387028400
Warranty and Support
This Pure Enrichment PureDry Elite Dehumidifier comes with a guaranteed 5-Year Manufacturer's Warranty. For any support or warranty claims, please contact Pure Enrichment customer service.
For more information and support, visit the official Pure Enrichment store: Pure Enrichment Store
