1. Product Overview
The Tylö Sense Combi Pure 6 is a versatile sauna heater designed for both dry sauna and steam sauna experiences. It offers rapid heating, precise temperature control, and an intelligent energy-saving function that can reduce energy consumption by up to 30%. The heater features a special Thermosafe surface to prevent accidental burns and includes a removable fragrance oil compartment for easy cleaning. The system is controlled via the intuitive Pure Control touch panel, allowing for quick adjustments of lighting, temperature, and sauna time.
Key Features:
- Efficient, smart, and easy to use.
- Thermosafe protective coating - Prevents accidental burns.
- Includes Pure Control touch control unit.
- Steam function. Allows use of fragrant essences and additives.
- The first choice for optimal sauna enjoyment.
Figure 1: Tylö Sense Combi Pure 6 Sauna Heater and Pure Control Panel.
2. Setup and Installation
The Tylö Sense Combi Pure 6 heater is designed for wall mounting. Professional installation by a qualified electrician is highly recommended to ensure safety and proper functionality.
Installation Requirements:
- Sauna Size: Recommended for saunas sized 4 to 8 m³.
- Mounting: Wall mounting.
- Minimum Ceiling Height: 190 cm.
Placing Sauna Stones:
The heater requires 20 kg of sauna stones (included). Ensure stones are placed loosely to allow for proper air circulation and efficient heating. Do not pack stones tightly.
Figure 2: Proper placement of sauna stones in the heater.
Connecting the Pure Control Unit:
Connect the Pure Control unit to the heater according to the detailed wiring diagrams provided in the separate installation manual. Ensure all connections are secure and comply with local electrical codes.
3. Operating Instructions
The Tylö Sense Combi Pure 6 is operated using the intuitive Pure Control touch panel. This panel allows you to manage all aspects of your sauna experience.
Figure 3: Tylö Pure Control Touch Panel.
Basic Operation:
- Power On/Off: Touch the power icon on the control panel to turn the heater on or off.
- Setting Temperature: Use the '+' and '-' buttons to adjust the desired sauna temperature. The current temperature will be displayed on the screen.
- Setting Time: Adjust the sauna session duration using the time setting controls.
- Steam Function: Activate the steam function for a soft sauna or steam bath experience. Ensure the water reservoir is filled.
- Lighting Control: Adjust the sauna cabin lighting directly from the control panel.
Using Fragrance Oils:
The heater includes a removable compartment for fragrance oils. Add a few drops of sauna-safe fragrance oil to the compartment. The heat and steam will diffuse the aroma throughout the sauna cabin. Always use fragrances specifically designed for sauna use.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Tylö Sense Combi Pure 6 sauna heater.
Cleaning the Heater:
- Ensure the heater is turned off and completely cooled before cleaning.
- Wipe the exterior surfaces with a damp cloth. Do not use abrasive cleaners or solvents.
- The fragrance oil compartment is removable for easy cleaning. Wash it with mild soap and water, then rinse thoroughly.
Sauna Stone Inspection:
Periodically inspect the sauna stones for signs of crumbling or deterioration. Replace any broken or worn-out stones to maintain heating efficiency and prevent damage to the heating elements. Ensure stones are clean and free of debris.
5. Troubleshooting
This section addresses common issues you might encounter with your Tylö Sense Combi Pure 6 sauna heater. For complex problems, always consult a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on | No power supply; Control panel issue; Safety cut-off activated | Check circuit breaker; Ensure control panel is properly connected; Allow heater to cool down if overheated. |
| No steam production | Water reservoir empty; Steam function not activated | Fill the water reservoir; Activate the steam function on the control panel. |
| Temperature not reaching set level | Insufficient sauna stones; Poor air circulation; Sauna room too large | Ensure 20 kg of stones are used and placed loosely; Verify sauna room size is within 4-8 m³ recommendation. |
6. Specifications
Detailed technical specifications for the Tylö Sense Combi Pure 6 sauna heater.
| Feature | Detail |
|---|---|
| Control Unit | Pure Control touch control unit |
| Heater Power | 6.6 kW |
| Materials | Stainless steel, cast aluminum, galvanized steel sheet |
| Outer Casing | Flocked coating (Thermo-Safe) |
| Recommended Sauna Size | 4 to 8 m³ |
| Installation Type | Wall mounting |
| Minimum Ceiling Height | 190 cm |
| Stone Quantity | 20 kg |
| Dimensions (W x H x D) | 43.5 x 62.5 x 375 cm |
| Manufacturer | Tylö |
| ASIN | B0B68J9F7N |
| Date First Available | July 11, 2022 |
Delivery Contents:
- 1 x Tylö Sense Combi 6 6.6 kW heater
- 1 x Tylö Pure control unit
- 1 x 20 kg sauna stones
- (Floor mounting feet optionally available)
7. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact Tylö customer service directly. Information regarding spare parts availability is currently unavailable.