ANCEL VOD700 Multi-System Scanner User Manual

1. Introduction to ANCEL VOD700

The ANCEL VOD700 is a specialized diagnostic scan tool designed for Volvo vehicles, offering comprehensive system diagnostics and advanced maintenance functions. It also provides standard OBDII engine diagnostics for other vehicle makes. This manual provides instructions for proper setup, operation, and maintenance of your device.

Figure 1.1: ANCEL VOD700 Multi-System Scanner and included EVA storage bag.

2. Package Contents

Verify that all items are present in your package:

• 1x ANCEL VOD700 OBD2 Scanner Unit
• 1x EVA Storage Bag
• 1x User Manual (this document)

Figure 2.1: ANCEL VOD700 scanner and manual stored within the EVA bag.

3. Initial Setup

Follow these steps to prepare your ANCEL VOD700 for use:

1. Locate the OBDII Port: The OBDII port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot locate it.
2. Connect the Scanner: Plug the ANCEL VOD700's diagnostic cable into the vehicle's OBDII port. Ensure a secure connection.
3. Power On: The scanner will automatically power on once connected to the vehicle's OBDII port. The vehicle's ignition should be in the "ON" position (engine off).
4. Language Selection: If prompted, select your preferred language from the available options (English, German, Spanish, French, Italian, Russian, Portuguese, Finnish, Danish, Swedish, Norwegian).

4. Basic Operation

The ANCEL VOD700 features a user-friendly interface with responsive buttons for navigation. The main menu provides access to various diagnostic and maintenance functions.

Figure 4.1: Main menu interface of the ANCEL VOD700, showing key functions.

4.1 Navigating the Menu

• Use the UP and DOWN arrow buttons to scroll through menu options.
• Press the OK button to confirm a selection or enter a submenu.
• Press the ESC button to return to the previous screen or exit a function.
• The I/M button provides quick access to I/M Readiness status.
• The READ DTC button allows for quick reading of Diagnostic Trouble Codes.

5. Volvo-Specific Maintenance Functions

The ANCEL VOD700 offers advanced maintenance services specifically for Volvo vehicles. Access these functions via the "For Volvo" or "Special Functions" menu options.

Figure 5.1: Volvo-specific maintenance functions menu.

5.1 Available Maintenance Services

• Oil Reset: Resets the oil service light after an oil change.
• BMS Reset: Performs battery management system reset after battery replacement.
• EPB Reset: Resets the electronic parking brake system after brake pad replacement.
• ETC Reset: Resets the electronic throttle control system.
• TPMS Reset: Resets the Tire Pressure Monitoring System.
• DPF Regeneration: Initiates Diesel Particulate Filter regeneration.
• ABS Bleeding: Performs ABS brake bleeding procedures.
• Fuel Injector Coding: Codes new injector numbers into the ECU.
• SRL Reset: Steering Angle Sensor Reset.
• Chassis Reset: Resets chassis-related systems.
• Auto Gearbox Reset: Resets automatic gearbox adaptations.
• Battery Registration: Registers a new battery with the vehicle's system.

Note: Always follow the on-screen instructions and your vehicle's service manual when performing maintenance functions. Incorrect procedures can cause damage.

6. OBDII Engine Diagnostics (All Vehicle Brands)

For non-Volvo vehicles, the VOD700 functions as a standard OBDII scanner, providing essential engine diagnostic capabilities.

Figure 6.1: OBDII Diagnostic Menu for engine systems.

6.1 OBDII Functions

• Read Codes: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's engine control module.
• Erase Codes: Clears DTCs and turns off the Malfunction Indicator Lamp (MIL).
• I/M Readiness: Checks the status of emission-related monitors.
• Data Stream: Displays live sensor data in text or graph format.
• EVAP System Test: Initiates a test of the Evaporative Emission Control System.
• Vehicle Information: Retrieves Vehicle Identification Number (VIN), Calibration ID (CIN), and Calibration Verification Number (CVN).
• O2 Sensor Test: Retrieves O2 sensor monitor test results.
• On-Board Monitor Test: Retrieves results for emission-related powertrain components.

6.2 Additional Features

• Battery Voltage Check: Monitors the vehicle's battery voltage.
• One-Click Smog Check: Provides a quick emissions readiness check.
• Auto VIN: Automatically retrieves vehicle identification information.

Figure 6.2: Additional diagnostic and utility features.

7. Vehicle Compatibility

The ANCEL VOD700 is designed for a wide range of Volvo vehicles. For specific model and year compatibility, refer to the table below. For non-Volvo vehicles, it supports standard OBDII protocols for engine diagnostics.

Figure 7.1: Volvo vehicle compatibility chart.

7.1 Supported Volvo Models (Examples)

8. Technical Specifications

9. Troubleshooting

If you encounter issues with your ANCEL VOD700, refer to the following common problems and solutions:

• Device does not power on:
  • Ensure the OBDII cable is securely connected to the vehicle's port.
  • Verify the vehicle's ignition is in the "ON" position (engine off).
  • Check the vehicle's battery voltage; a low battery may prevent the scanner from powering on.
• "Link Error" or "Communication Error" message:
  • Confirm the OBDII cable is properly connected.
  • Ensure the vehicle's ignition is "ON".
  • Verify the vehicle is OBDII compliant (most vehicles 1996 and newer in the US).
  • Try connecting to a different OBDII compliant vehicle to rule out a vehicle-specific issue.
• No response from buttons:
  • Restart the device by disconnecting and reconnecting it to the OBDII port.
  • Ensure the device's firmware is up to date (check ANCEL's official website for updates).
• Incorrect diagnostic results:
  • Ensure the correct vehicle make, model, and year are selected if applicable.
  • Consult your vehicle's service manual for specific diagnostic procedures.
  • Update the device firmware.

10. Customer Support and Warranty

For technical assistance, firmware updates, or warranty inquiries, please contact ANCEL customer support.

• Official Website: Visit the ANCEL Official Website for product information, FAQs, and support resources.
• Email Support: Contact support@anceltech.com for assistance.
• Warranty Information: The ANCEL VOD700 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or the official website for detailed terms and conditions.