Vixic BZ Label Maker Tape Instruction Manual

1. Introduction

This manual provides instructions for the Vixic BZ Label Maker Tapes. These tapes are designed for use with Vixic label makers and are also compatible with various Brother P-Touch models. Each pack contains 6 laminated tapes with black text on assorted pastel backgrounds.

The tapes feature a width of 12mm (0.47 inches) and a length of 8 meters (26.2 feet). They are securely packaged to ensure safe transport and ease of use.

2. Compatibility

Vixic BZ Label Maker Tapes are equipped with intelligent chips for seamless recognition and smooth operation with Vixic label makers. Using non-official tapes may result in recognition issues or potential harm to your labeler.

Compatible Vixic Label Makers:

D210S
H1100
D480BT
P780BT
E1000
P3200

Compatible Brother P-Touch Label Makers (TZe/TZ Tape Series):

PT-D210, PT-D220, PT-H110, PT-H111, PT-D600, PT-D610BT, PT-D400, PT-D400AD, PT-D200, PT-D460BT, PT-D410, PT-D200G, PT-D400VP, PT-D450, PT-D600VP
PT-1090, PT-1190, PT-1230PC, PT-1290, PT-1880C, PT-1880SC, PT-1880W, PT-1890C, PT-1890SC, PT-1890W, PT-1950, PT-2430PC, PT-6100
PT-D800W, PT-H100, PT-E100, PT-H300, PT-H300LI, PT-H500LI, PT-P700, PT-P750W, PT-9600

Vixic BZ Label Maker Tape Compatibility Chart — Image: This chart illustrates the compatibility of Vixic BZ label tapes with various Vixic and Brother P-Touch label maker models, including D210S, H1100, E1000, P3200, D480BT, P780BT, PT-D210, PT-D460BT, PT-P300BT, PT-P750W, PT-1180, PT-1090, PT-D220, PT-D600VP, PT-P710BT, PT-H500LI, PT-1830, PT-H100, PT-H110, PT-D400VP, PT-P900W, PT-1280BT, PT-1890C, PT-D410, PT-D610BT, PT-D200, PT-P700, PT-1280SP, PT-2030.

3. Setup and Installation

Follow these steps to properly install the Vixic BZ Label Maker Tape into your compatible label maker:

Prepare the Tape: Ensure the end of the tape is correctly threaded through both tape guides within the cassette. Extend approximately 3-4 cm (1.2-1.6 inches) of label tape from the cassette.
Tighten the Tape: Locate the green gear on the label tape cassette. Turn this gear in the direction indicated by the arrow until the tape is taut.
Insert into Label Maker: Extend a small portion of the tape from the cassette to align with the label maker's outlet. Carefully insert the tape cassette into the label maker according to your device's specific instructions.

Vixic BZ Label Maker Tape Installation Steps — Image: A visual guide demonstrating the three steps for installing the Vixic BZ label tape: threading the tape through guides, tightening the green gear, and extending the tape to the label maker's outlet.

4. Operating Instructions and Features

Once installed, the Vixic BZ Label Maker Tapes are ready for use with your compatible label maker. These tapes offer several features designed for durability and ease of use:

Laminated Design: The tapes are laminated, providing a protective layer that makes them suitable for both indoor and outdoor applications.
Durability: Vixic label tapes are resistant to water, fading, abrasion, corrosion, and extreme temperatures, ensuring labels remain clear and intact over time.
Split Backing: The backing tape is divided lengthwise down the middle, facilitating effortless peeling and application of the label.
Strong Adhesive: Designed to stick firmly to various surfaces without leaving residue upon removal.

Features of Vixic BZ Color Tapes — Image: This graphic highlights key features of Vixic BZ color tapes, including easy-to-peel 2-part backing, strong adhesive, and no residue upon removal.

Vixic Laminated-Sturdy Labels Durability — Image: This image demonstrates the robust nature of Vixic laminated labels, showing their resistance to water, fading, abrasion, corrosion, and extreme temperatures.

5. Maintenance

To ensure the longevity and optimal performance of your Vixic BZ Label Maker Tapes, consider the following maintenance tips:

Storage: Store unused tape cassettes in their original packaging in a cool, dry place away from direct sunlight and extreme temperatures.
Handling: Avoid touching the adhesive side of the tape to maintain its stickiness.
Cleaning: If the label maker's tape path becomes dusty, refer to your label maker's manual for cleaning instructions. Do not attempt to clean the tape cassette itself.

6. Troubleshooting

If you encounter issues while using your Vixic BZ Label Maker Tapes, consider the following:

Tape Not Recognized: Ensure you are using official Vixic BZ tapes. Other brands may not be recognized by Vixic label makers due to the integrated intelligent chip.
Poor Print Quality: Verify that the tape is correctly installed and taut within the cassette. Ensure your label maker's print head is clean (refer to your label maker's manual).
Tape Jams: Check that the tape is not twisted or improperly threaded. Ensure no debris is obstructing the tape path in the label maker.
Adhesion Issues: Ensure the surface you are applying the label to is clean, dry, and smooth.

Vixic Label Tape with Chip vs. No Chip — Image: This comparison illustrates the benefits of Vixic label tapes with integrated chips, which ensure labeler-friendly operation, enhanced recognition, and exceptional print quality, contrasting with potential issues from tapes without chips.

Vixic Secure Packaging for Label Tape — Image: This image shows Vixic label tapes in their secure packaging, designed to prevent damage during transit and ensure safe delivery, compared to generic plastic packaging that offers less protection.

7. Specifications

Feature	Detail
Product Type	Laminated Label Tape
Quantity	6-Pack
Tape Width	12mm (0.47 Inch)
Tape Length	8m (26.2 Feet)
Text Color	Black
Background Colors	White, Pastel Blue, Pastel Pink, Mint Green, Pastel Purple, Lemon Yellow
Material Type	Plastic (Laminated)
Durability Features	Water-resistant, Fade-resistant, Abrasion-resistant, Extreme Temperature Resistant, Corrosion-resistant
Special Features	Split Backing Design, Intelligent Chip for Recognition

Vixic Label Maker Tape Size — Image: This graphic illustrates the dimensions of the Vixic label maker tape, showing a width of 12mm (1/2 inch) and a length of 8m (26.2 feet).

8. Warranty and Support

For any questions regarding your Vixic BZ Label Maker Tapes or for technical assistance, please contact Vixic customer support. Ensure you purchase official Vixic BZ tapes from authorized retailers to guarantee compatibility and performance.

While specific warranty details are not provided in this document, Vixic is committed to providing quality products. Please refer to the Vixic official website or your purchase documentation for warranty information.

	Vixic D210S PRO Label Maker User Guide Comprehensive user guide for the Vixic D210S PRO label maker, covering setup, operation, troubleshooting, and product specifications. Learn how to create professional labels for home, office, and school.
	Vixic D480BT Label Maker Quick Start Guide A quick start guide for the Vixic D480BT label maker, covering charging, tape loading, and printing instructions from the device, computer, and mobile.
	P3200 Portable Label Maker Instruction Manual User manual for the Vixic P3200 Portable Label Maker, providing detailed instructions on setup, operation, specifications, app connection, printing, maintenance, troubleshooting, warranty, and FCC compliance.
	Vixic D480BT Label Maker Quick Start Guide A quick start guide for the Vixic D480BT label maker, covering charging, tape loading, printing from the device, computer, and mobile devices.
	Vixic E1000 PRO Label Maker User Guide Comprehensive user guide for the Vixic E1000 PRO label maker, covering setup, operation, features, and maintenance for efficient label creation.
	Vixic D1600 Label Maker: Instruction Manual and Specifications Comprehensive guide to the Vixic D1600 portable label maker, covering setup, specifications, app connection, printing, maintenance, and troubleshooting.

Vixic BZ Tapes 12mm