maxtek 60 x 36 Inch Magnetic Foldable Dry Erase Whiteboard Instruction Manual

1. Introduction

Thank you for choosing the maxtek 60 x 36 Inch Magnetic Foldable Dry Erase Whiteboard. This manual provides essential information for the proper setup, operation, and maintenance of your new whiteboard. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

This whiteboard is designed for versatile use in various environments, including offices, classrooms, and homes, offering a spacious and durable writing surface for effective communication and organization.

Image 1.1: The maxtek 60 x 36 inch magnetic foldable dry erase whiteboard, illustrating its large writing surface and magnetic capabilities.

2. Safety Information

• Ensure the whiteboard is securely mounted to a stable wall surface to prevent accidental falls.
• Keep small accessories like magnets and marker caps out of reach of young children to avoid choking hazards.
• Use only dry erase markers specifically designed for whiteboards. Permanent markers will damage the surface.
• Avoid using abrasive cleaners or sharp objects on the whiteboard surface, as this can cause scratches or damage.

3. Package Contents

Please verify that all items listed below are included in your package:

• 1 x maxtek 60 x 36 Inch Magnetic Foldable Dry Erase Whiteboard
• 1 x Long Marker Tray
• 1 x Dry Erase Eraser
• 3 x Dry Erase Markers (Assorted Colors)
• 6 x Colorful Magnets
• 1 x Installation Instruction Manual (Printed)
• 6 x Installation Tools (Screws, Wall Anchors, etc.)

Image 3.1: All items included in the maxtek whiteboard package, ready for setup and use.

4. Setup and Installation

The maxtek whiteboard is designed for easy wall-mounting. For detailed step-by-step instructions, please refer to the included Installation Manual (PDF).

4.1 Wall Mounting

1. Choose Location: Select a suitable wall location, ensuring it is sturdy enough to support the whiteboard's weight (approximately 11.81 pounds).
2. Mark Drilling Points: Use a level to mark the desired positions for the four high-quality metal triangle hooks. Ensure the spacing is accurate for the 60-inch width.
3. Drill Holes: Drill pilot holes at the marked points. Insert wall anchors if necessary, depending on your wall material.
4. Attach Hooks: Securely fasten the metal triangle hooks to the wall using the provided screws. The stable triangular structure helps prevent sliding.
5. Hang Whiteboard: Carefully lift the whiteboard and hang it onto the installed hooks. Ensure it is level and stable.
6. Install Marker Tray: Attach the long marker tray to the bottom frame of the whiteboard.

Image 4.1: Detail of the metal hooks and screw fixing for secure wall mounting.

4.2 Protective Film Removal

Before first use, gently pull off the protective film from the whiteboard surface. This film protects the surface during shipping.

5. Operating Instructions

5.1 Writing and Erasing

• Use only dry erase markers on the whiteboard surface.
• Write clearly and allow ink to dry for a few seconds before erasing to prevent smudging.
• Use the provided dry erase eraser to clean the surface. For stubborn marks, a whiteboard cleaner or a damp cloth can be used (see Maintenance section).

Image 5.1: The whiteboard surface allows for easy writing and clean erasing.

5.2 Using Magnets

The whiteboard features a magnetic surface. Use the included magnets to attach notes, messages, pictures, memos, calendars, and other lightweight items directly to the board.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your whiteboard.

6.1 Cleaning the Surface

• Regularly clean the whiteboard surface with the provided dry erase eraser.
• For a deeper clean or to remove ghosting, use a specialized whiteboard cleaning spray or a damp cloth with mild soap and water. Wipe dry immediately with a clean, soft cloth.
• Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the surface coating.

6.2 Frame and Corners

The whiteboard features a durable aluminum frame and ABS plastic corners. Wipe these components with a soft, damp cloth as needed to keep them clean.

Image 6.1: Sturdy construction design with enduring ABS corners and premium metal hooks.

7. Troubleshooting

• Problem: Marks are difficult to erase or ghosting occurs.
  Solution: Ensure you are using only dry erase markers. Clean the board thoroughly with a whiteboard cleaning spray or a damp cloth with mild soap, then wipe dry. Avoid leaving writing on the board for extended periods (e.g., weeks or months).
• Problem: Whiteboard feels unstable after mounting.
  Solution: Recheck all mounting screws and hooks to ensure they are securely fastened to the wall. Verify that the wall material is appropriate for the chosen mounting hardware.
• Problem: Magnets do not stick firmly.
  Solution: Ensure the items being attached are lightweight. If the issue persists, the magnets may be weak or the surface may have a protective layer that needs to be removed.

8. Specifications

9. Warranty and Support

maxtek is committed to providing high-quality products. This whiteboard comes with a Lifetime Warranty, ensuring peace of mind regarding its durability and performance.

For any questions, concerns, or support needs regarding your maxtek whiteboard, please contact our customer service. Refer to the product packaging or the maxtek official website for contact information.