Elica IND FLEXI FB 375 DX DFS 3 Burner Gas Hob Instruction Manual

Introduction

Welcome to your new Elica IND FLEXI FB 375 DX DFS 3 Burner Gas Hob. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

Important Safety Information

Always prioritize safety when operating gas appliances. Failure to follow these instructions could result in fire, explosion, or carbon monoxide poisoning.

• Ensure proper ventilation in the kitchen area during operation.
• Do not store flammable materials, such as aerosols or cleaning products, near the hob.
• In case of a gas leak, immediately turn off the main gas supply, open windows and doors, and do not operate electrical switches or ignite any flames. Contact a qualified technician immediately.
• Keep children and pets away from the appliance during operation and while it is cooling down.
• Do not use the hob for space heating.
• Ensure all burners are turned off after each use.
• Installation and servicing must be performed by a qualified and certified professional.

Product Overview

The Elica IND FLEXI FB 375 DX DFS is a versatile 3-burner gas hob designed for efficient cooking. It features a durable glass top, auto-ignition, and high-efficiency brass burners.

Key Components

• Toughened Glass Top: An 8 mm thick glass surface for durability and easy cleaning.
• Direct Flame Full Brass Burners: Includes two triple-ring (2.9 kW) and one double-ring (1.7 kW) burners for high efficiency.
• Metallic Knobs: 360-degree rotating knobs for precise flame control.
• Sealed Burner Cups: Designed to prevent spillage and maintain injector cleanliness.
• Cast Iron Pan Supports: Provides stable support for various cookware sizes.
• Auto Electric Ignition: Battery-operated system for convenient ignition.

Product Features

The following images illustrate key features of your Elica gas hob:

Direct Flame Burners: These burners utilize a vertical flame design to optimize the air and gas mixture, leading to higher efficiency and reduced cooking time and gas consumption. The image shows a lit burner with distinct vertical blue flames.

Fully Sealed Burner Cups: Designed with a vertical injector, these cups prevent food spillage from blocking the injectors. This design helps maintain a consistent blue flame and prevents yellow flames, ensuring efficient combustion. The image displays the sealed burner cup structure.

Full Brass Heavy-Duty Burners: The hob is equipped with robust full brass burners that offer high-efficiency flame levels, suitable for various cooking requirements. The image shows the durable brass construction of a burner.

360° Rotating Round Metallic Knobs: These ergonomically designed metallic knobs provide smooth rotation for precise control over the flame intensity. The image highlights the knob design and its rotational capability.

Setup and Installation

The Elica IND FLEXI FB 375 DX DFS can be used as a built-in hob or a free-standing unit. Professional installation by a qualified technician is highly recommended to ensure safety and proper functioning.

Unpacking

• Carefully remove the hob from its packaging.
• Check for any damage during transit. Report any damage immediately to your supplier.
• Ensure all included components are present: 1 Unit Hob, User Manual, and Warranty Card.

Placement and Ventilation

• Position the hob in a well-ventilated area, away from flammable materials.
• Maintain adequate clearance from walls and overhead cabinets as per local safety regulations.

Built-in Installation (Carcass Cutting)

If installing as a built-in unit, ensure the countertop opening matches the specified dimensions:

• Carcass Cutting Dimensions (Width x Depth x Height): 71.5 cm x 41.4 cm x 5 cm.

Gas Connection

The gas connection must be performed by a certified gas technician. Ensure the correct type of gas supply (LPG/PNG) is used and that all connections are leak-free. Refer to local codes and standards for gas appliance installation.

Battery Installation for Auto-Ignition

The auto-ignition system requires battery power. Locate the battery compartment (typically underneath the hob or near the control panel) and insert the specified battery type (usually a D-cell battery) according to the polarity markings. Ensure the battery cover is securely closed.

Operating Instructions

Before First Use

• Ensure the hob is correctly installed and connected to the gas supply.
• Verify that the battery for auto-ignition is correctly installed.

Igniting a Burner

• Place your cookware on the desired burner's cast iron pan support.
• Push down the corresponding control knob and rotate it counter-clockwise to the "Ignite" position (usually marked with a flame symbol).
• The auto-ignition will spark, igniting the gas. Hold the knob down for a few seconds after ignition to allow the thermocouple to heat up and keep the flame lit.
• Once the flame is stable, release the knob.
• Adjust the flame intensity by rotating the knob between the "High" and "Simmer" positions as needed for cooking.

Turning Off a Burner

• Rotate the control knob clockwise until it reaches the "Off" position (usually marked with a dot or zero).
• Ensure the flame is completely extinguished.

Cooking with the Hob: The image shows a burner in operation with a pan, demonstrating typical use. Ensure cookware is centered on the pan support for even heating.

Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life and efficiency of your Elica gas hob. Always ensure the hob is cool and the gas supply is turned off before cleaning.

Cleaning the Glass Top

• Use a soft cloth or sponge with mild detergent and warm water.
• For stubborn stains, use a non-abrasive glass cleaner specifically designed for hob surfaces.
• Avoid abrasive cleaners, scouring pads, or harsh chemicals that can scratch or damage the glass surface.
• Wipe dry with a clean, lint-free cloth to prevent water spots and streaks.

Cleaning Burners and Pan Supports

• Remove the pan supports, burner caps, and burner rings only when they are completely cool.
• Wash these components with warm soapy water. For heavy grease or burnt-on food, a degreasing agent can be used.
• Ensure all parts are completely dry before reassembling. Moisture can affect ignition and flame quality.
• Gently clean the ignition pin and thermocouple with a soft brush if they appear dirty or obstructed.

Preventing Spillage

• The sealed burner cups are designed to minimize spillage into the hob's internal components.
• Promptly clean any spills on the glass top to prevent them from hardening and becoming more difficult to remove.

Troubleshooting

If you encounter issues with your Elica gas hob, refer to the following common problems and solutions. If the problem persists after attempting these steps, contact customer support.

Technical Specifications

Warranty and Customer Support

Warranty Information

Your Elica IND FLEXI FB 375 DX DFS gas hob comes with a comprehensive warranty:

• 5 Years Warranty: On Glass, Burner, and Valves.
• 2 Years Comprehensive Warranty: From the date of purchase.

Please retain your purchase receipt for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage due to improper installation, misuse, or unauthorized repairs.

Customer Support

For any queries, service requests, or technical assistance, please contact Elica Customer Care:

• Phone: 7447440983 / 7447440984 / 7447440985
• Manufacturer: WHIRLPOOL OF INDIA KITCHEN APPLIANCES PRIVATE LIMITED (Formerly known as ELICA PB WHIRLPOOL KITCHEN APPLIANCES PRIVATE LIMITED)
• Address: 32/5 A1 Kondhwa-Pisoli Road, Pisoli, Pune 411060 Maharashtra India

When contacting support, please have your model number (IND FLEXI FB 375 DX DFS) and purchase details ready to expedite service.