CELLECOR E10 Feature Phone User Manual

Introduction

Thank you for choosing the CELLECOR E10 Dual SIM Feature Phone. This manual provides essential information for setting up, operating, and maintaining your device. Please read it carefully to ensure proper use and to maximize the phone's capabilities. The CELLECOR E10 is designed for reliable communication with features such as a large battery, torch light, wireless FM, and a rear camera.

Safety Information

• Do not use the phone while driving.
• Keep the phone away from water and moisture.
• Avoid exposing the phone to extreme temperatures.
• Use only original CELLECOR accessories, such as batteries and chargers.
• Do not attempt to disassemble or repair the phone yourself. Refer to qualified service personnel.
• Dispose of the battery and phone responsibly according to local regulations.

Package Contents

Please check the box for the following items:

• CELLECOR E10 Feature Phone
• Battery (2750 mAh)
• Charger
• User Manual
• Warranty Card

Product Overview

Familiarize yourself with the components of your CELLECOR E10 phone.

Figure 1: Front and back view of the CELLECOR E10 feature phone, showcasing its compact design and rear camera module.

Figure 2: Various angles of the CELLECOR E10, including top, bottom, and side views, highlighting the torch light and overall slim profile.

Key Components:

• Display: 2.4-inch screen for viewing menus, messages, and calls.
• Keypad: Alphanumeric keys for dialing and text input, along with navigation and function keys.
• Rear Camera: 0.8 MP primary camera for capturing photos.
• Torch Light: Integrated LED light for illumination.
• Speaker: For call audio and multimedia playback.
• Charging Port: For connecting the charger.
• 3.5mm Audio Jack: For connecting headphones.

Setup

1. Inserting the SIM Card(s) and Memory Card:

1. Remove the back cover of the phone.
2. Carefully remove the battery.
3. Insert your SIM card(s) into the designated SIM slots. The CELLECOR E10 supports Dual SIM.
4. If desired, insert a microSD card (up to 32 GB) into the memory card slot for expandable storage.
5. Replace the battery and then the back cover.

2. Charging the Battery:

1. Connect the charger to the charging port on the phone.
2. Plug the charger into a power outlet.
3. Allow the phone to charge fully before first use. The battery indicator on the screen will show charging status.

3. Powering On/Off:

• To power on, press and hold the Power/End Call key until the screen lights up.
• To power off, press and hold the Power/End Call key until the power off options appear, then select "Power off".

Operating

The CELLECOR E10 offers a range of features for daily communication and entertainment.

Figure 3: Visual representation of key features including Dual SIM, 2.4" Display, Camera, Vibration, 2000 mAh Battery, Torch Light, Auto Call Recording, MP3 & MP4 Player, Wireless FM, and Expandable Memory.

Making Calls:

1. Enter the phone number using the keypad.
2. Press the Call key (usually green) to initiate the call.
3. To end a call, press the End Call key (usually red).

Sending Messages:

1. Navigate to the "Messages" menu.
2. Select "Write message" or "New SMS".
3. Enter your message using the keypad.
4. Enter the recipient's number or select from contacts.
5. Send the message.

Using the Camera:

1. Go to the "Camera" application from the main menu.
2. Frame your shot using the display.
3. Press the center navigation key or dedicated camera key to capture the photo.

Wireless FM Radio:

• Access the "FM Radio" application.
• The phone supports wireless FM, so headphones are not required as an antenna.
• Scan for available stations or manually tune to a frequency.

Torch Light:

• The torch light can typically be activated by a dedicated shortcut key or through the menu. Refer to your phone's specific key functions.

Auto Call Recording:

• This feature allows automatic recording of phone calls. Check the "Call Settings" or "Settings" menu for options to enable or disable this function.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the phone's surface. Do not use liquid cleaners or aerosols.
• Battery Care: Avoid overcharging the battery. If the phone will not be used for an extended period, charge it to about 50% before storing.
• Storage: Store the phone in a cool, dry place away from direct sunlight and extreme temperatures.
• Software Updates: Keep your phone's software updated if updates become available, to ensure optimal performance and security.

Troubleshooting

Specifications

Warranty and Support

Your CELLECOR E10 Feature Phone comes with a 1 Year Warranty from the date of purchase. Please retain your purchase receipt and the warranty card for any warranty claims.

For Support:

• Refer to the troubleshooting section in this manual for common issues.
• For further assistance, please contact CELLECOR customer service. Contact details can typically be found on the warranty card or the official CELLECOR website.
• For secure transactions and returns policy information, please refer to your point of purchase.