AZZA LEGIONAIRE CSAZ-470 ATX Computer Case User Manual

1. Introduction

The AZZA LEGIONAIRE CSAZ-470 is an ATX computer case designed for PC enthusiasts and builders. It features a metal mesh side panel for optimal airflow and includes four pre-installed 120mm ARGB & PWM fans for efficient cooling and customizable lighting. This manual provides essential information for the proper installation, setup, operation, and maintenance of your computer case.

Image 1.1: Front-side view of the AZZA LEGIONAIRE CSAZ-470 ATX Computer Case.

2. Package Contents

Please inspect the package contents to ensure all items are present and undamaged:

• AZZA LEGIONAIRE CSAZ-470 ATX Computer Case
• 4 x 120mm ARGB & PWM Fans (pre-installed)
• Accessory Kit (various screws, standoffs, cable ties)
• User Manual (this document)

3. Specifications

Refer to the table below for detailed technical specifications of the AZZA LEGIONAIRE CSAZ-470 computer case:

Image 3.1: Internal layout showing fan positions, maximum GPU length (400mm), and maximum CPU cooler height (170mm).

4. Setup and Installation

Follow these steps to install your components into the AZZA LEGIONAIRE CSAZ-470 case.

4.1 Pre-Installation

1. Unpack the Case: Carefully remove the case from its packaging.
2. Inspect for Damage: Check the case for any signs of damage during shipping. Contact your retailer if damage is found.
3. Remove Side Panels: Unscrew and remove the metal mesh side panel and the steel right side panel to access the interior.

4.2 Motherboard Installation

1. Install Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (E-ATX, ATX, Micro ATX, ITX).
2. Place Motherboard: Carefully align your motherboard with the standoffs and the rear I/O shield opening.
3. Secure Motherboard: Use the provided screws to secure the motherboard to the standoffs. Do not overtighten.

4.3 Power Supply Installation

1. Mount PSU: Slide your power supply unit (PSU) into the dedicated compartment at the rear bottom of the case.
2. Secure PSU: Secure the PSU to the case using screws from the rear.

4.4 Storage Drive Installation

The case supports 2.5-inch drives.

1. Locate Drive Bays: Identify the 2.5-inch drive bays within the case.
2. Install Drives: Mount your SSDs or HDDs into the designated bays using the appropriate screws.

4.5 Graphics Card and Expansion Card Installation

1. Remove Slot Covers: Remove the necessary expansion slot covers from the rear of the case.
2. Insert Card: Carefully insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Secure Card: Secure the card with the provided screws. The case supports graphics cards up to 400mm in length.

4.6 Cable Management and Connections

1. Connect Power Cables: Connect all necessary power cables from the PSU to your motherboard, graphics card, and storage drives.
2. Connect Front Panel I/O: Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 3.0, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.
3. Connect Fans: The pre-installed 120mm ARGB & PWM fans require both PWM (for speed control) and ARGB (for lighting) connections. Connect the 4-pin PWM connectors to your motherboard's fan headers and the 3-pin ARGB connectors to your motherboard's 5V ARGB headers or a compatible ARGB controller.
4. Organize Cables: Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly.

Image 4.1: Top panel showing HD Audio, USB 3.0 x 2, LED control, and Power buttons.

5. Operating Instructions

5.1 Powering On Your System

After all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the PSU. Press the Power button on the top panel of the case to start your system.

5.2 ARGB Fan Control

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if connected to a 5V ARGB header) or through a dedicated ARGB controller (if included with your motherboard or purchased separately). Refer to your motherboard's manual for specific ARGB software instructions.

6. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your computer case and components.

6.1 Dust Filter Cleaning

The AZZA LEGIONAIRE CSAZ-470 features dust filters to prevent dust buildup inside the case. It is recommended to clean these filters every 1-3 months, depending on your environment.

1. Power Off: Shut down your computer and disconnect the power cable.
2. Remove Filters: Carefully remove the dust filters (e.g., top, front, bottom).
3. Clean Filters: Use compressed air or rinse the filters with water. If using water, ensure they are completely dry before reinstallation.
4. Reinstall Filters: Place the clean and dry filters back into their positions.

6.2 General Cleaning

Wipe the exterior of the case with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.

7. Troubleshooting

If you encounter issues with your AZZA LEGIONAIRE CSAZ-470 case, refer to the following common problems and solutions:

• System Not Powering On:
  Check: Ensure the power supply is properly connected and switched on. Verify that the front panel power switch cable is correctly connected to the motherboard. Confirm all power cables to the motherboard and components are securely seated.
• Fans Not Spinning or ARGB Not Working:
  Check: Ensure fan PWM cables are connected to motherboard fan headers and ARGB cables are connected to 5V ARGB headers or a controller. Verify fan and ARGB settings in your motherboard's BIOS/UEFI or software.
• USB Ports Not Functioning:
  Check: Ensure the USB 3.0 front panel connector is securely plugged into the corresponding header on your motherboard.
• Audio Ports Not Functioning:
  Check: Ensure the HD Audio front panel connector is securely plugged into the audio header on your motherboard.

If problems persist, consult your motherboard manual or contact AZZA customer support.

8. Warranty and Support

8.1 Warranty Information

The AZZA LEGIONAIRE CSAZ-470 computer case comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

8.2 Customer Support

For technical assistance, warranty claims, or further inquiries, please visit the official AZZA website or contact their customer support department. You can find contact information and support resources at www.azza.com.