DAN Technology B0B5YT92XG

DAN Technology Dual Voltage 2-inch Hair Dryer Brush

Instruction Manual

Introduction

Thank you for choosing the DAN Technology Dual Voltage 2-inch Hair Dryer Brush. This innovative 4-in-1 styling tool combines a hairdryer, hair straightener, curling iron, and hair comb, designed to volumize, straighten, and dry your hair simultaneously. Its automatic dual voltage feature and compact design make it ideal for both home and international travel. Please read this manual thoroughly before use to ensure safe and effective operation.

Important Safety Information

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

  • DANGER: Keep away from water. Do not use while bathing or in a shower. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. If an appliance falls into water, unplug it immediately. Do not reach into the water.
  • WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:
  • This appliance is for household use only.
  • Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
  • Always unplug this appliance immediately after using.
  • Unplug this appliance before cleaning.
  • Do not use an extension cord with this appliance.
  • Do not operate any appliance with a damaged cord or plug, or if the appliance malfunctions or has been dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
  • Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
  • Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
  • Never use while sleeping.
  • Never drop or insert any object into any opening.
  • Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Do not use a voltage converter on this electric straightening brush as it may damage the equipment. The product features automatic dual voltage (110V-240V) and does not require an external converter for voltage adaptation.

Product Features

  • Automatic Dual Voltage: Operates between 110V-240V, automatically converting to local voltage, making it suitable for most countries without an additional voltage converter.
  • Multi-function Plug Adapter: Includes an adapter suitable for UK, European, German, Australian, and American standard sockets. Note: The adapter plug facilitates socket compatibility but does not convert voltage.
  • Compact and Lightweight Design: Features a 2-inch oval brush and weighs only 0.9 pounds, providing a comfortable and portable styling experience.
  • 4-in-1 Functionality: Combines a hairdryer, hair straightener, curling iron, and hair comb to volumize, straighten, and dry hair simultaneously, saving styling time.
  • Multi-level Heat Settings: Three heat settings (Low, Medium, High) for different hair types:
    • Low: For soft, fine, or thin hair.
    • Medium: For semi-dry or normal hair.
    • High: For thick hair.
  • Ceramic Coating: Ensures even heat distribution and is gentle on hair.
  • ALCI Safety Plug: Provides enhanced safety for use.
  • 360° Swivel Cord: Prevents tangling and allows for flexible styling.

Package Contents

Your DAN Technology Dual Voltage Hair Dryer Brush package includes:

  • 1 x Dual Voltage Hot Air Brush (2-inch)
  • 1 x Multi-function Plug Adapter
  • 1 x Silver Makeup Bag (for storage and carrying)
  • 2 x Hair Clips
  • 1 x Cleaning Brush
Image showing the DAN Technology 4-in-1 Hair Dryer Brush with icons for hair dryer, straightener, curler, and massage comb functions.

Figure 1: The 4-in-1 functionality of the hair dryer brush.

Image showing the DAN Technology Dual Voltage Hair Dryer Brush and a multi-function plug adapter, highlighting its travel compatibility.

Figure 2: Dual voltage capability and included multi-function plug adapter for international travel.

Image showing the compact size of the DAN Technology Hair Dryer Brush held in a hand, emphasizing its portability.

Figure 3: The compact and lightweight design of the hair dryer brush.

Detailed view of the DAN Technology Hair Dryer Brush showing anti-scalding comb, unique airflow vents, ceramic coating, ergonomic handle, meticulous air inlet design, 360-degree swivel cord, and ALCI safety plug.

Figure 4: Detailed features of the hair dryer brush, including safety and design elements.

Setup

  1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
  2. Inspect: Check the appliance for any signs of damage. Do not use if the cord or plug is damaged.
  3. Power Connection: The hair dryer brush features automatic dual voltage (110V-240V). When traveling internationally, use the provided multi-function plug adapter to fit the local wall socket. No voltage converter is needed.
  4. ALCI Safety Plug: Ensure the ALCI safety plug is functioning correctly before each use. Press the 'TEST' button, then the 'RESET' button. The 'RESET' button should pop up, indicating it's ready for use. If it does not reset, do not use the appliance.

Operating Instructions

For best results, towel-dry your hair to remove excess water before using the hair dryer brush.

  1. Plug In: Connect the appliance to an appropriate electrical outlet.
  2. Select Heat Setting: Rotate the switch at the base of the handle to select your desired heat setting:
    • LOW: Low temperature, high speed – suitable for soft, fine, or thin hair.
    • MEDIUM: Medium temperature, low speed – suitable for semi-dry or normal hair.
    • HIGH: High temperature, high speed – suitable for thick hair.
    Image illustrating the three heat settings (Low, Medium, High) on the DAN Technology Hair Dryer Brush, with corresponding temperature and speed indicators.

    Figure 5: Heat and speed settings on the hair dryer brush.

  3. Section Hair: Divide your hair into manageable sections using the provided hair clips.
  4. Styling: Place the brush close to the roots and brush down towards the ends. For added volume, lift hair at the roots and hold for a few seconds. For curls, wrap sections of hair around the brush and hold before releasing. Repeat until hair is dry and styled.
  5. Finish: Once styling is complete, rotate the switch to 'OFF' and unplug the appliance. Allow it to cool down before storing.

Video 1: Demonstration of using the DAN Technology One Step Hair Dryer and Volumizer for styling.

Video 2: Demonstration of using the DAN Technology 2-inch Lightweight Small Hair Dryer Brush for drying and styling.

Maintenance

  1. Cleaning: Ensure the appliance is unplugged and completely cool before cleaning. Use the provided cleaning brush to remove any hair or lint from the bristles and air vents. Wipe the body of the appliance with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
  2. Storage: Store the appliance in a cool, dry place. Do not wrap the cord around the appliance, as this can damage the cord. Use the provided cosmetic bag for convenient storage and travel.

Troubleshooting

ProblemPossible CauseSolution
Appliance does not turn on.Not plugged in correctly; ALCI safety plug tripped; power outlet issue.Ensure the plug is fully inserted. Press the 'RESET' button on the ALCI plug. Try a different power outlet.
Low airflow or heat.Air inlet/outlet blocked by lint or hair.Unplug the appliance and allow it to cool. Clean the air inlet and brush bristles using the provided cleaning brush.
Hair tangles in the brush.Too much hair sectioned at once; improper brushing technique.Work with smaller sections of hair. Brush slowly and smoothly from roots to ends.
Appliance smells unusual or overheats.Internal malfunction; blocked airflow.Immediately unplug the appliance. Allow it to cool completely. Check for blocked air vents. If the issue persists, discontinue use and contact customer support.

Specifications

  • Model: B0B5YT92XG
  • Brush Size: 2 inches (oval)
  • Voltage: 110V-120V / 220V-240V (Automatic Dual Voltage)
  • Wattage: 650 watts
  • Power Source: Corded Electric
  • Heat Settings: 3 (Low, Medium, High)
  • Material: Ceramic coating
  • Product Dimensions: 10 x 3.1 x 2.8 inches
  • Item Weight: 1.2 Pounds
  • Special Features: ALCI Safety Plug, Lightweight, 360° Swivel Cord

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact DAN Technology customer service. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the official DAN Technology store for more information: DAN Technology Store

Documents - DAN Technology – B0B5YT92XG

no relevant documents

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.