Introduction
This manual provides essential instructions for the safe installation, operation, and maintenance of the RAB H17 Field Adjustable LED Highbay. Please read this manual thoroughly before installation or use and retain it for future reference. The H17 high bay is a compact LED lighting fixture designed for high output applications, offering adjustable color temperature and wattage settings.
Safety Information
- Always disconnect power before installation, servicing, or cleaning.
- Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Ensure the supply voltage is compatible with the fixture's requirements (120/208/240/277 V).
- Do not handle the fixture with wet hands.
- Avoid looking directly into the LED light source when illuminated.
- This fixture is suitable for wet locations.
Product Features
- Adjustable Color Correlated Temperature (CCT) between 3000K, 4000K, or 5000K.
- Adjustable power output between 100W, 120W, or 150W.
- Lumen output levels: 17088, 19765, 22224.
- Dimmable down to 10% with 0-10V standards.
- Universal Voltage Input: 120/208/240/277 V.
- 3/4"-14 NPT Hook mounting.
- DLC Premium Listed.
Setup and Installation
1. Unpacking
Carefully remove the fixture from its packaging. Inspect for any damage. Retain packaging materials for future transport or return if necessary.
2. Mounting
The RAB H17 Highbay is designed for 3/4"-14 NPT hook mounting. Ensure the mounting structure can safely support the fixture's weight (approximately 7.3 pounds).
Figure 1: Side view of the RAB H17 LED Highbay, illustrating the integrated hook for mounting. The hook is designed for secure attachment to a compatible NPT threaded pipe or mounting accessory.
Figure 2: Dimensional drawing of the RAB H17 LED Highbay. This diagram provides key measurements including overall height (7 3/8"), fixture height (4 11/16"), and diameter (10 1/4"), crucial for planning installation space.
3. Wiring
Connect the fixture to a universal voltage input of 120/208/240/277 V. Follow local electrical codes for wiring connections. Ensure all connections are secure and properly insulated.
4. Adjusting CCT and Wattage
The H17 Highbay features field-adjustable settings for both Color Correlated Temperature (CCT) and wattage. These adjustments are typically made via switches located on the fixture body. Refer to the labels near the switches for specific settings.
- CCT Adjustment: Select between 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White) to suit application requirements.
- Wattage Adjustment: Choose between 100W, 120W, or 150W to control light output and energy consumption.
Figure 3: Bottom view of the RAB H17 LED Highbay, showcasing the circular LED array. The central area may contain access points for CCT and wattage adjustment switches.
Operating Instructions
1. Powering On/Off
Once installed and wired, the fixture will illuminate when power is supplied. Use a standard wall switch or circuit breaker to control power to the unit.
2. Dimming Function
The H17 Highbay supports 0-10V dimming. Connect a compatible 0-10V dimmer to the fixture's dimming wires according to the dimmer manufacturer's instructions and local electrical codes. The fixture can be dimmed down to 10% of its maximum light output.
3. Remote Control (If Applicable)
Some configurations of the H17 may include remote control functionality. If a remote control is provided, refer to its specific instructions for pairing and operation. The remote typically allows for power on/off, dimming, and potentially CCT adjustments.
Maintenance
The RAB H17 LED Highbay requires minimal maintenance. Regular cleaning and inspection will ensure optimal performance and longevity.
- Cleaning: Disconnect power before cleaning. Use a soft, damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as these can damage the finish or optical components.
- Inspection: Periodically inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure mounting hardware remains secure.
- LEDs: The LEDs are designed for long life and do not require replacement.
Troubleshooting
If the fixture is not operating correctly, consult the following table before contacting support:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not illuminate | No power supply Loose wiring connection Faulty switch/breaker | Check power supply at the circuit breaker. Verify all wiring connections are secure. Test the switch or breaker for functionality. |
| Light output is too low/high | Incorrect wattage setting Dimmer setting too low/high | Adjust the wattage switch on the fixture. Adjust the 0-10V dimmer to the desired level. |
| Light color is incorrect | Incorrect CCT setting | Adjust the CCT switch on the fixture to the desired color temperature. |
| Flickering light | Unstable power supply Incompatible dimmer Loose wiring | Ensure stable power. Consult an electrician. Verify dimmer compatibility with 0-10V standard. Check all wiring connections. |
Specifications
| Specification | Value |
|---|---|
| Brand | RAB Lighting |
| Model Number | H17 |
| Light Type | LED |
| Wattage (Adjustable) | 100W, 120W, 150W |
| Voltage | 120/208/240/277 Volts |
| Color Temperature (Adjustable) | 3000K, 4000K, 5000K |
| Brightness (Max) | 22224 Lumens (at 150W) |
| Dimming | 0-10V Dimmable (down to 10%) |
| Mounting Type | 3/4"-14 NPT Hook mounting |
| Material | Aluminum |
| Indoor/Outdoor Usage | Outdoor (Suitable for wet locations) |
| Item Weight | 7.3 pounds |
| Certification | UL, DLC Premium Listed |
| Control Method | Remote (if applicable) |
| UPC | 192552022026 |
Warranty and Support
For warranty information or technical support, please refer to the official RAB Lighting website or contact their customer service department. Keep your purchase receipt as proof of purchase.
