1. Introduction
This instruction manual provides guidance for the proper installation, use, and maintenance of your Joyroom Knight Series Toughened Film JR-PF010 screen protector. This product is designed to protect your iPhone 11 Pro (5.8-inch) screen from scratches, impacts, and daily wear, while maintaining touch sensitivity and display clarity.
2. Package Contents
Please verify that all items are present in the package:
- Joyroom Knight Series Toughened Film Screen Protector (1 unit)
- Wet Cleaning Wipe (1 unit)
- Dry Cleaning Cloth (1 unit)
- Dust Removal Sticker (1 unit)

Image Description: The product packaging for the Joyroom Knight Series Toughened Film. One side highlights "High Definition Tempered Glass" with "9X Shatter Protection" and "0.25mm Ultrathin." The other side details installation steps and features like "Impact Protection," "High-Definition Clarity," "Easy Application," and "Oil Resistant / Smudge Resistant."
3. Installation Guide
Follow these steps carefully for optimal installation. Ensure you are in a dust-free environment.
- Clean the Screen: Use the provided wet cleaning wipe to thoroughly clean your phone's screen, removing all dirt, oil, and smudges.
- Dry the Screen: Use the dry cleaning cloth to wipe the screen until it is completely dry and lint-free.
- Remove Dust: Use the dust removal sticker to gently dab the screen, picking up any remaining dust particles. Ensure the screen is perfectly clean before proceeding.
- Align the Protector: Carefully peel off the protective film from the adhesive side of the screen protector. Hold the screen protector by its edges and align it precisely with your phone's screen, paying attention to the speaker, camera, and home button cutouts.
- Apply the Protector: Once aligned, gently lower the screen protector onto the phone's screen. The adhesive will begin to spread automatically.
- Remove Bubbles: If any air bubbles remain, gently push them towards the edges of the screen using the dry cleaning cloth or a soft card. Small bubbles typically disappear within 24-48 hours.

Image Description: A close-up view of an iPhone screen, illustrating the clean surface before the application of a screen protector. This step emphasizes the importance of a pristine screen for proper installation.

Image Description: A screen protector being carefully positioned and applied to an iPhone screen. The image shows the protector slightly above the phone, ready for precise alignment before adhesion.

Image Description: An iPhone with the Joyroom Knight Series Toughened Film screen protector fully installed. The protector covers the entire screen, demonstrating its 2.5D full-screen design and seamless integration with the device.
4. Usage and Care
Once installed, the screen protector requires minimal special care. It is designed for daily use and provides robust protection.
- Avoid placing your phone with sharp objects (keys, coins) in the same pocket or bag to prevent excessive scratching of the protector.
- The protector is designed to be shockproof and anti-scratch, but extreme impacts can still cause damage to both the protector and the phone screen.
- The anti-fingerprint coating helps reduce smudges, but occasional cleaning is recommended.
5. Maintenance
To keep your screen protector clear and functional:
- Wipe the screen protector regularly with a soft, lint-free cloth.
- For stubborn smudges, lightly dampen the cloth with water or a screen cleaner specifically designed for electronics. Avoid harsh chemicals.
- Do not use abrasive materials, as they can scratch the protector's surface.
6. Troubleshooting
6.1. Air Bubbles After Installation
- Small Bubbles: Many small bubbles will naturally disappear within 24-48 hours as the adhesive fully settles.
- Large Bubbles: Gently push them towards the nearest edge using a soft cloth or a credit card wrapped in a cloth. Apply steady, even pressure.
- Dust-Induced Bubbles: If a bubble persists and appears to have a dust particle underneath, it may be necessary to carefully lift the nearest corner of the protector with a piece of tape, use another piece of tape to remove the dust, and then reapply. This should be done with extreme caution to avoid damaging the adhesive or introducing more dust.
6.2. Edges Not Sticking
- Ensure the screen was thoroughly cleaned and free of dust or oil, especially along the edges, before installation.
- Apply firm, even pressure to the edges for a few minutes after installation to help the adhesive bond.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Joyroom |
| Model Number | JR-PF010 |
| Compatible Devices | iPhone 11 Pro (5.8 Inches) |
| Material | Tempered Glass |
| Item Hardness | 9H |
| Special Features | Anti-Scratch, Shockproof, Anti-Fingerprint, Anti-Glare |
| Finish Type | Matte |
| Water Resistance Level | Not Water Resistant |
| Product Dimensions | 13 x 6 x 1.27 cm |
8. Warranty and Support
For warranty information or technical support, please refer to the official Joyroom website or contact their customer service directly. Contact details are typically available on the product packaging or the manufacturer's official online channels.