ECONTROLLY 100027812

Download PDF
Contents

User Manual for ECONTROLLY Replacement Remote Control

Model: 100027812

Compatible with ONN Sound BAR Blast 5.1 400W 36" Soundbar

Introduction

This manual provides comprehensive instructions for the ECONTROLLY 100027812 replacement remote control. Designed to seamlessly operate your ONN Sound BAR Blast 5.1 400W 36" Soundbar, this remote offers a direct replacement solution without the need for complex programming.

Package Contents

  • 1 x ECONTROLLY Replacement Remote Control (Model: 100027812)
  • User Manual (this document)

Product Overview

Front View

Front view of the ECONTROLLY replacement remote control, showing all buttons.

This image displays the front of the ECONTROLLY replacement remote control, highlighting the layout of its various function buttons, including power, input selection, volume, bass, treble, and mute controls.

Back View

Back view of the ECONTROLLY replacement remote control, showing the battery compartment and model number.

The back view of the remote control is shown, featuring the battery compartment cover at the bottom and the model number '100027812' clearly printed on the main body.

Button Functions

ButtonFunction
PowerTurns the soundbar On or Off.
MuteMutes or unmutes the soundbar audio.
AUXSelects the Auxiliary input source.
HDMI ARCSelects the HDMI Audio Return Channel input.
HDMI INSelects the standard HDMI input.
OpticalSelects the Optical audio input.
Bluetooth (represented by asterisk/star icon)Selects the Bluetooth input source.
VOL + / -Increases or decreases the main volume level.
Play/PausePlays or pauses media playback.
Previous TrackSkips to the previous track.
Next TrackSkips to the next track.
RESETResets sound settings or the remote itself.
BASS + / -Adjusts the bass level up or down.
TREB + / -Adjusts the treble level up or down.
EQCycles through available equalizer presets.

Setup

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Press down on the tab and slide the battery cover downwards to open.
  3. Insert two (2) AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. Slide the battery cover back into place until it clicks securely.

Initial Use

This ECONTROLLY replacement remote control is pre-programmed and does not require any additional setup or programming. Once batteries are installed, it is ready for immediate use with your compatible ONN Sound BAR Blast 5.1 400W 36" Soundbar.

Operating Instructions

To operate your soundbar using this remote control, simply point the remote directly at the soundbar's infrared (IR) receiver and press the desired function button.

  • Power On/Off: Press the Power button to turn the soundbar on or off.
  • Volume Control: Use the VOL + button to increase volume and VOL - to decrease volume.
  • Mute: Press the Mute button to temporarily silence the audio. Press again to restore sound.
  • Input Selection: Press AUX, HDMI ARC, HDMI IN, Optical, or the Bluetooth button to switch between different audio input sources.
  • Bass Adjustment: Use BASS + to increase bass and BASS - to decrease bass.
  • Treble Adjustment: Use TREB + to increase treble and TREB - to decrease treble.
  • Equalizer Presets: Press the EQ button to cycle through available sound equalizer modes (e.g., Movie, Music, News).
  • Media Playback Controls: Use the Play/Pause, Previous Track, and Next Track buttons for controlling media playback when applicable (e.g., via Bluetooth).
  • Reset: The RESET button can be used to restore certain sound settings to their default values or to reset the remote's internal state if it becomes unresponsive.

Maintenance

Cleaning

Wipe the remote control periodically with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these may damage the remote's surface or internal components.

Battery Replacement

Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.

Troubleshooting

ProblemPossible CauseSolution
Remote not working.Batteries are dead or incorrectly inserted.Replace batteries with new AAA alkaline batteries, ensuring correct polarity.
Remote not working.Obstruction between remote and soundbar.Ensure there is a clear line of sight between the remote's IR emitter and the soundbar's IR receiver.
Remote not working.Soundbar is not powered on.Ensure the soundbar is plugged in and powered on.
Some buttons not responding.Specific button malfunction or soundbar not supporting the function.Check if other buttons work. Ensure your soundbar model supports the specific function. Try resetting the remote (if applicable).
Remote range is poor.Low batteries or interference.Replace batteries. Ensure no strong light sources (like direct sunlight) are interfering with the IR signal.

Specifications

FeatureDetail
Model Number100027812
Compatible DevicesONN Sound BAR Blast 5.1 400W 36" Soundbar
Connectivity TechnologyInfrared (IR)
Power Source2 x AAA Alkaline Batteries (not included)
Dimensions (L x W x H)7 x 2 x 0.65 inches (approximate)
Weight1.55 ounces (without batteries)
ManufacturerECONTROLLY Factory

Warranty Information

This ECONTROLLY product is covered by the manufacturer's standard warranty. Please refer to the original product packaging or contact ECONTROLLY customer support for specific warranty terms and conditions.

Customer Support

For further assistance, technical support, or inquiries regarding your ECONTROLLY replacement remote control, please contact the manufacturer directly. Contact information can typically be found on the product packaging or the ECONTROLLY official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.