Trevi SL 3054 Quartz Alarm Clock User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Trevi SL 3054 Quartz Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and longevity.

The Trevi SL 3054 is designed to provide accurate timekeeping and reliable alarm functionality with a silent sweep movement for undisturbed rest. It features a large, easy-to-read dial and a convenient snooze/light function.

Product Features

• Silent SWEEP Movement: Ensures quiet operation without ticking sounds.
• Large Dial: Provides clear and easy readability of the time.
• Snooze/Light Button: Activates a temporary backlight for night viewing and pauses the alarm.
• Electronic Alarm: Produces an audible alert at the set time.
• LED Dial Illumination: For enhanced visibility in low-light conditions.
• Ergonomic Design: For comfortable handling and placement.

Setup

1. Battery Installation

The Trevi SL 3054 requires one (1) AA battery (not included) for operation.

1. Locate the battery compartment cover on the back of the alarm clock.
2. Slide or lift the cover to open the compartment.
3. Insert one AA battery, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
4. Replace the battery compartment cover securely.

Image: Rear view of the Trevi SL 3054 alarm clock, highlighting the battery compartment and adjustment knobs for time and alarm settings.

2. Setting the Time

1. Locate the "TIME SET" knob on the back of the clock.
2. Rotate the "TIME SET" knob in either direction until the hour and minute hands display the correct current time.

3. Setting the Alarm

1. Locate the "ALARM SET" knob on the back of the clock.
2. Rotate the "ALARM SET" knob until the alarm hand points to your desired alarm time.
3. Ensure the alarm ON/OFF switch (usually a small slider) is in the "ON" position to activate the alarm.

Image: Front view of the Trevi SL 3054 alarm clock, showing the large, clear dial with hour, minute, and alarm hands.

Operating Instructions

1. Activating/Deactivating the Alarm

• To activate the alarm, slide the alarm ON/OFF switch (located on the back or side) to the "ON" position.
• To deactivate the alarm, slide the alarm ON/OFF switch to the "OFF" position.

2. Snooze/Light Function

• When the alarm sounds, press the large "SNOOZE/LIGHT" button located on the top of the clock.
• Pressing this button will temporarily silence the alarm, and it will sound again after a short interval (typically 5-10 minutes).
• Pressing the "SNOOZE/LIGHT" button at any time will illuminate the dial for a few seconds, allowing you to read the time in the dark.

Image: Side view of the Trevi SL 3054 alarm clock, illustrating the prominent snooze/light button on the top surface.

Maintenance

• Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace the AA battery when the clock's timekeeping becomes inaccurate or the alarm weakens. Remove depleted batteries promptly to prevent leakage.
• Storage: If storing the clock for an extended period, remove the battery to prevent potential damage from battery leakage.

Troubleshooting

Specifications

• Model: Trevi SL 3054
• Movement: Quartz, Silent SWEEP
• Power Source: 1 x AA Battery (not included)
• Dimensions (L x W x H): Approximately 10 x 3.81 x 9 cm (3.94 x 1.5 x 3.54 inches)
• Weight: Approximately 130 g (0.29 lbs)
• Features: Large Dial, Snooze/Light Function, Electronic Alarm, LED Illumination

Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Trevi website. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in this troubleshooting section, please contact Trevi customer service for assistance.