1. Product Overview
The MOVSSOU E7 Active Noise Cancelling Headphones are designed to provide a superior audio experience with advanced noise cancellation, comfortable wear, and extended battery life. These wireless Bluetooth headphones are ideal for various uses, from travel and office work to daily commutes and personal listening.

Figure 1: MOVSSOU E7 Active Noise Cancelling Headphones (Teal Green variant).
Key Features:
- Advanced Active Noise Cancelling Technology: Significantly reduces ambient noise for an immersive listening experience.
- Superior Call Quality: Built-in microphone with advanced audio signal processing ensures clear hands-free conversations.
- Premium Sound Quality: Equipped with 45mm drivers for deep, powerful, and immersive sound across a full range of frequencies.
- Pressure-Free Comfort: Designed for extended wear with super-soft, pressure-relieving ear pads and a lightweight build.
- All-day Power with 30 Hour Playtime: Enjoy up to 30 hours of continuous audio playback on a single charge.
2. Setup Guide
2.1 What's in the Box
- 1 x MOVSSOU E7 Active Noise Cancelling Bluetooth Wireless Headphones
- 1 x Charge Cable
- 1 x Audio Cable (for wired connection)
- 1 x User Manual
2.2 Charging the Headphones
Before first use, fully charge your MOVSSOU E7 headphones. A full charge takes approximately 4 hours and provides up to 30 hours of playtime.
- Connect the provided charge cable to the charging port on the headphones.
- Connect the other end of the charge cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator on the headphones will show charging status (refer to the specific LED behavior in your quick start guide if available).
- Once fully charged, disconnect the cable.

Figure 2: The MOVSSOU E7 headphones offer up to 30 hours of playtime.
2.3 Bluetooth Pairing
To connect your headphones to a device via Bluetooth 5.0:
- Ensure the headphones are powered off.
- Press and hold the Power button on the headphones until you hear "Power On" and the LED indicator starts flashing (usually blue/red, indicating pairing mode).
- On your device (smartphone, tablet, laptop, TV with Bluetooth), go to Bluetooth settings and enable Bluetooth.
- Search for available devices and select "MOVSSOU E7" from the list.
- Once connected, the headphones will indicate "Connected" and the LED light will typically turn solid blue or stop flashing.
The headphones are compatible with a wide range of Bluetooth devices including computers, televisions, desktops, laptops, tablets, Windows, mobile (Android, iOS) devices.
3. Operating Instructions
3.1 Controls Overview
The MOVSSOU E7 headphones feature intuitive controls for managing audio playback, calls, and noise cancellation.
- Power Button: Press and hold to power on/off. A quick tap may activate/deactivate Active Noise Cancellation (ANC) when powered on.
- Volume Control: Use the dedicated volume buttons (up/down) to adjust audio levels.
- Call Control: Manage phone calls with integrated controls for answering, ending, and rejecting calls.
- Voice Control: Supports voice assistant activation.
- ANC Mode Button: One touch into your personal world. Ideal for blocking out noise around you.

Figure 3: Key features including Active Noise Cancelling and Built-in Microphone.
3.2 Active Noise Cancellation (ANC)
The advanced ANC technology reduces a wide range of low and mid-frequency noises, such as aircraft engines or car sounds. To activate ANC, ensure the headphones are powered on, then press the ANC button. You will notice a significant reduction in ambient noise, allowing you to focus on your audio.

Figure 4: Enjoy peace and quiet with ANC, perfect for travel.
3.3 Making and Receiving Calls
With the built-in microphone, you can make and receive calls hands-free. Conversation flows freely with clear voice quality. Refer to your device's manual for specific call management functions (e.g., answering, ending, rejecting calls) using the headphone controls.

Figure 5: Clear hands-free calling for seamless communication.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your MOVSSOU E7 headphones.
- Cleaning: Use a soft, dry cloth to wipe the earcups and headband. Avoid using abrasive cleaners or solvents.
- Storage: Store the headphones in a cool, dry place away from extreme temperatures and direct sunlight. When not in use, it is recommended to store them in a protective case to prevent damage.
- Avoid Moisture: The headphones are not water-resistant. Avoid exposure to water, rain, or excessive humidity.
- Handle with Care: Do not drop or apply excessive force to the headphones.
5. Troubleshooting
If you encounter issues with your MOVSSOU E7 headphones, try the following troubleshooting steps:
- No Power: Ensure the headphones are fully charged. Connect them to a power source and allow them to charge for a few minutes before attempting to power on again.
- Cannot Pair:
- Ensure Bluetooth is enabled on your device and the headphones are in pairing mode (flashing LED).
- Move the headphones closer to your device.
- Forget/remove "MOVSSOU E7" from your device's Bluetooth list and attempt to pair again.
- Restart both your device and the headphones.
- No Sound or Low Volume:
- Check the volume levels on both the headphones and your connected device.
- Ensure the headphones are properly connected via Bluetooth.
- If using the audio cable, ensure it is fully inserted into both the headphones and your device.
- ANC Not Working Effectively:
- Ensure the ANC feature is activated.
- Adjust the fit of the headphones on your ears to ensure a good seal.
If issues persist, please contact MOVSSOU customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | MOVSSOU |
| Model Name | E7 |
| Item Model Number | E7 Basic C |
| Color | Teal Green |
| Connectivity Technology | Bluetooth 5.0, Wireless |
| Wireless Communication Technology | Bluetooth, Built-in Mic, Noise Cancelling, Wireless |
| Noise Control | Active Noise Cancellation |
| Ear Placement | Over Ear |
| Form Factor | Over Ear |
| Audio Driver Size | 45 Millimeters |
| Frequency Response | 20 Hz - 20,000 Hz (20 KHz) |
| Battery Life | 30 Hours |
| Charging Time | 4 Hours |
| Bluetooth Range | 10 Meters |
| Headphones Jack | 3.5 mm Jack |
| Material | Leather |
| Item Weight | 9.9 ounces (0.62 Pounds) |
| Product Dimensions | 7.68 x 7.2 x 2.17 inches |
| Water Resistance Level | Not Water Resistant |
| Control Type | Noise Control, Voice Control, Call Control, Volume Control |
| Control Method | Touch |
7. Warranty and Support
For warranty information and customer support, please refer to the official MOVSSOU website or contact their customer service directly. Details regarding specific warranty periods and terms are typically provided with your purchase documentation or on the manufacturer's official channels.
You can also visit the MOVSSOU Store on Amazon for additional product information and support resources.





