Introduction
Thank you for choosing the BLACK+DECKER High Velocity Floor Fan. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new fan. Please read all instructions carefully before use and retain this manual for future reference.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Do not operate any fan with a damaged cord or plug.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Always unplug the fan before cleaning or performing any maintenance.
- Do not insert fingers or foreign objects into any opening of the fan.
- Do not use this fan near water or in wet locations.
- This fan is for indoor use only.
- Keep children and pets away from the fan during operation.
Product Features
- High Velocity Airflow: Equipped with 5 plastic blades and a 15.6-inch diameter for powerful air circulation.
- 3 Speed Settings: Easily adjust airflow intensity with a simple control knob.
- 90-Degree Tilt Adjustment: Direct airflow precisely where needed for optimal comfort.
- Sturdy and Portable Design: Weighing 5.5 lbs, this fan features a durable plastic housing and a stable base, suitable for various rooms.
- Versatile Placement: Ideal for use in bedrooms, home offices, garages, or any space requiring improved air circulation.
Image: The fan features a 16-inch blade span for maximizing airflow.
Image: The fan is designed with a sturdy base that occupies minimal space.
Image: The fan is suitable for use in diverse environments such as homes, garages, or offices.
Image: The fan's dimensions are 20.55 inches (width) x 6.38 inches (depth) x 19.17 inches (height).
Setup
Your BLACK+DECKER High Velocity Floor Fan comes fully assembled and ready for use. Simply remove it from the packaging and place it on a stable, flat surface.
- Unpack the fan and all components.
- Place the fan on a firm, level surface. Ensure it is not near curtains or other objects that could obstruct airflow or get caught in the blades.
- Plug the power cord into a standard 120V AC electrical outlet.
Image: The BLACK+DECKER High Velocity Floor Fan ready for use in a room.
Operating Instructions
Speed Settings
The fan features three speed settings: Low, Medium, and High. To adjust the speed:
- Locate the control knob on the rear side of the fan.
- Turn the knob clockwise to select your desired speed:
- LOW: For gentle air circulation.
- MEDIUM: For moderate airflow.
- HIGH: For maximum air velocity.
- To turn the fan off, rotate the knob counter-clockwise to the 'OFF' position.
Image: The fan offers three distinct speed settings for varied airflow needs.
Tilt Adjustment
The fan head can be tilted up to 90 degrees to direct airflow. To adjust the tilt:
- Grasp the fan housing firmly.
- Gently pivot the fan head to the desired angle. The fan will hold its position once set.
Image: The fan head can be adjusted up to 90 degrees to pivot and direct airflow.
Maintenance
Regular cleaning will help maintain your fan's performance and extend its lifespan.
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- To clean the fan blades, carefully remove the front guard if possible (refer to product diagram for specific instructions if applicable). Wipe the blades with a soft cloth. Ensure all parts are dry before reassembling and operating the fan.
- Do not immerse the fan in water or allow water to drip into the motor housing.
Troubleshooting
If your fan is not operating correctly, please check the following common issues before contacting customer support:
- Fan does not turn on:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the control knob is set to an 'ON' position (Low, Medium, or High).
- Verify that the circuit breaker has not tripped.
- Low airflow:
- Increase the speed setting using the control knob.
- Ensure the fan blades and grilles are clean and free from dust or obstructions.
- Check that the fan is not placed too close to a wall or other objects that could restrict airflow.
- Unusual noise:
- Ensure the fan is placed on a stable, level surface to prevent vibrations.
- Check for any loose parts or foreign objects caught in the fan blades or grille.
Specifications
| Feature | Detail |
|---|---|
| Brand | BLACK+DECKER |
| Model Name | Floor Fan for Home, Garage, Bedroom, or Office, Cooling Fan for Floor (BFF16B) |
| Color | Black/White |
| Electric Fan Design | Floor Fan |
| Power Source | Corded Electric |
| Product Dimensions | 6.38"D x 20.55"W x 19.17"H |
| Item Weight | 5.5 Pounds |
| Number of Blades | 3 (Note: Product description mentions 5 blades, specifications mention 3. Using 3 as per specifications table.) |
| Blade Length | 16 Inches |
| Voltage | 120V |
| Wattage | 52 watts |
| Noise Level | 45 Decibels |
| Switch Type | Knob or Dial |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | No |
Warranty Information
This BLACK+DECKER High Velocity Floor Fan comes with a 1-year limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact customer support.
Customer Support
For further assistance, product inquiries, or to report an issue not covered in this manual, please contact BLACK+DECKER customer support. Contact information can typically be found on the product packaging or the official BLACK+DECKER website.
Product Videos
Video: Official product overview of the BLACK+DECKER Floor Fan by Equity Brands.
